References
- J. A. Parsons, H. Je-Chin and Z. Yuming, “Wall heating effect on local heat transfer in a rotating two-pass square channel with 90° rib turbulators,” Int. J. Heat Mass Transf., vol. 37, no. 9, pp. 1411–1420, 1994. DOI: https://doi.org/10.1016/0017-9310(94)90187-2.
- H. Deng, Y. Li, Z. Tao, G. Xu and S. Tian, “Pressure drop and heat transfer performance in a rotating two-pass channel with staggered 45-deg ribs,” Int. J. Heat Mass Transf., vol. 108, pp. 2273–2282, Jan. 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.048.
- V. D. Narasimhamurthy and H. I. Andersson, “Turbulence statistics in a rotating ribbed channel,” Int. J. Heat Fluid Flow, vol. 51, pp. 29–41, 2015. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2014.10.008.
- M. Kanikzadeh and A. Sohankar, “Numerical investigation of forced convection flow of nanofluids in rotating U-Shaped smooth and ribbed channels,” Heat Transf. Eng., vol. 37, no. 10, pp. 840–861, 2016. DOI: https://doi.org/10.1080/01457632.2015.1089739.
- J. Wang, J. Liu, L. Wang, B. Sundén and S. Wang, “Numerical investigation of heat transfer and fluid flow in a rotating rectangular channel with variously-shaped discrete ribs,” Appl. Therm. Eng., vol. 129, pp. 1369–1381, 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2017.09.142.
- A. K. Tolpadi, “Calculation of heat transfer in a radially rotating coolant passage,” Num. Heat Transf. A Appl., vol. 26, no. 6, pp. 683–699, 1994. DOI: https://doi.org/10.1080/10407789408956017.
- S. Abdel-Wahab and D. K. Tafti, “Large eddy simulation of flow and heat transfer in a 90° ribbed duct with rotation – effect of Coriolis forces,” ASME Turbo Expo: 2004, Vienna, Austria. GT2004-53796, 679–710, 2004. DOI: https://doi.org/10.1115/GT2004-53796.
- A. K. Viswanathan and D. K. Tafti, “Detached eddy simulation of flow and heat transfer in fully developed rotating internal cooling channel with normal ribs,” Int. J. Heat Fluid Flow, vol. 27, no. 3, pp. 351–370, 2006. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2005.12.003.
- A. Salvagni, D. Borello, F. Rispoli and K. Hanjalić, “Large-eddy simulations of heat transfer in asymmetric rib-roughened ducts: Effects of rotation,” Int. J. Heat Fluid Flow, vol. 68, pp. 373–385, 2017. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2017.09.019.
- C. Prakash and R. Zerkle, “Prediction of turbulent flow and heat transfer in a ribbed rectangular duct with and without rotation,” J. Turbomach. 3A Gen., vol. 117, no. 2, pp. 255–264, 1995. DOI: https://doi.org/10.1115/1.2835654.
- D. K. Tafti and S. P. Vanka, “A numerical study of the effects of spanwise rotation on turbulent channel flow,” Phys. Fluids A., vol. 3, no. 4, pp. 642–656, 1991. DOI: https://doi.org/10.1063/1.858215.
- D. Borello, A. Salvagni and K. Hanjalić, “Effects of rotation on flow in an asymmetric rib-roughened duct: LES study,” Int. J. Heat Fluid Flow, vol. 55, pp. 104–119, 2015. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2015.07.012.
- N. Kaewchoothong, P. Narato and C. Nuntadusit, “Experimental investigation of the heat transfer characteristics and thermal performance inside a ribbed serpentine channel during rotational effects,” Exp. Therm. Fluid Sci., vol. 111, pp. 109973, 2020. DOI: https://doi.org/10.1016/j.expthermflusci.2019.109973.
- P. Singh, W. Li, S. V. Ekkad and J. Ren, “Experimental and numerical investigation of heat transfer inside two-pass rib roughened duct (AR = 1:2) under rotating and stationary conditions,” Int. J. Heat Mass Transf., vol. 113, pp. 384–398, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.085.
- N. Al-Zurfi, A. Alhusseny and A. Nasser, “Effect of rotation on forced convection in wavy wall channels,” Int. J. Heat Mass Transf., vol. 149, pp. 119177, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.119177.
- S. M. Hoseinalipour, H. Shahbazian and B. A. Sunden, “Influences of secondary flow induced by Coriolis forces and angled ribs on heat transfer in a rotating channel,” Int. J. Num. Meth. HFF, vol. 29, no. 1, pp. 388–417, 2019. DOI: https://doi.org/10.1108/HFF-02-2018-0081.
- S. Dutta, J. Han and C. P. Lee, “Local heat transfer in a rotating two-pass ribbed triangular duct with two model orientations,” Int. J. Heat Mass Transf., vol. 39, no. 4, pp. 707–715, 1996. DOI: https://doi.org/10.1016/0017-9310(95)00171-9.
- L. Wang, S. Wang, F. Wen, X. Zhou and Z. Wang, “Heat transfer and flow characteristics of U-shaped cooling channels with novel wavy ribs under stationary and rotating conditions,” Int. J. Heat Mass Transf., vol. 126, pp. 312–333, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.05.123.
- A. G. Ramgadia and A. K. Saha, “Study of fully-developed turbulent flow and heat transfer in a rotating wavy-walled duct,” Int. J. Heat Mass Transf., vol. 144, pp. 118578, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118578.
- S. W. Chang, T. L. Yang and W. J. Wang, “Heat transfer in a rotating twin-pass trapezoidal-sectioned passage roughened by skewed ribs on two opposite wall,” Heat Transf. Eng., vol. 27, no. 10, pp. 63–79, 2006. DOI: https://doi.org/10.1080/01457630600908602.
- D. Wei, L. Lei, W. Songtao, L. Jian and S. Bengt, “Heat transfer and flow structure in a rotating duct with detached pin fins,” Num. Heat Transf. A Appl., vol. 75, no. 4, pp. 217–241, 2019. DOI: https://doi.org/10.1080/10407782.2019.1580957.
- K. Sreekesh, S. Vengadesan and D. K. Tafti, “LES investigation of modified rib shapes on heat transfer in a ribbed duct,” ASME J. Heat Transf., pp. HT-21-1044, May 2021. DOI: https://doi.org/10.1115/1.4051507.
- D. K. Tafti, “Genidlest - A scalable parallel computational tool for simulating complex turbulent flows,” Proc. ASME Fluids Eng. Div., vol. 256, pp. 347–356, 2001.
- D. K. Tafti, “Evaluating the role of subgrid stress modeling in a ribbed duct for the internal cooling of turbine blades,” Int. J. Heat Fluid Flow, vol. 26, no. 1, pp. 92–104, 2005. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2004.07.002.
- D. K. Tafti, "Time-accurate techniques for turbulent heat transfer analysis in complex geometries," Advances in Computational Fluid Dynamics and Heat Transfer, WIT Transactions on State of the Art in Science and Engineering, vol. 41, pp. 271–264, 2010. DOI: https://doi.org/10.2495/978-1-84564-144-3/06.
- F. M. Najjar and D. K. Tafti, “Study of discrete test filters and finite difference approximations for the dynamic subgrid-scale stress model,” Phys. Fluid. A., vol. 8, no. 4, pp. 1076–1088, 1996. DOI: https://doi.org/10.1063/1.868887.
- M. Germano, U. Piomelli, P. Moin and W. H. Cabot, “A dynamic subgrid-scale eddy viscosity model,” Phys. Fluid A, vol. 3, no. 7, pp. 1760–1765, 1991. DOI: https://doi.org/10.1063/1.857955.
- P. Moin, K. Squires, W. Cabot and S. Lee, “A dynamic sub-grid-scale model for compressible turbulence and scalar transport,” Phys. Fluids A, vol. 3, no. 11, pp. 2746–2757, 1991. DOI: https://doi.org/10.1063/1.858164.
- F. P. Incropera, and D. P. Dewitt, Fundamentals of Heat and Mass Transfer, 5th ed. New York: John Wiley and Sons, 2002.
- J. H. Wagner, B. V. Johnson, R. A. Graziani and F. C. Yeh, “Heat transfer in rotating serpentine passages with trips normal to the flow,” J. Turbomach., vol. 114, no. 4, pp. 847–857, 1992. DOI: https://doi.org/10.1115/1.2928038.
- T. M. Liou, M. Y. Chen and M. H. Tsai, “Fluid flow and heat transfer in a rotating two-pass square duct with in-line 90° ribs,” ASME Turbo Expo: 2001-GT-0185, vol. 124, no. 2, pp. 260–268, 2002. DOI: https://doi.org/10.1115/1.1459079.
- D. K. Tafti, C. Dowd and X. Tan, “High Reynolds number LES of a rotating two-pass ribbed duct,” Aerospace, vol. 5, no. 4, pp. 124, 1–37, 2018. DOI: https://doi.org/10.3390/aerospace5040124.