References
- J. Lu, L. Shen, Q. Huang, D. Sun, B. Li, and Y. Tan, “Investigation of a rectangular heat pipe radiator with parallel heat flow structure for cooling high-power IGBT modules,” Int. J. Therm. Sci., vol. 135, pp. 83–93, 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2018.09.004.
- T. Aihara, “Natural convection heat transfer from vertical rectangular-fin arrays: Part 2, heat transfer from fin-edges,” Bull. JSME, vol. 13, no. 64, pp. 1182–1191, 1970. DOI: https://doi.org/10.1299/jsme1958.13.1182.
- T. Aihara, “Natural convection heat transfer from vertical rectangular-fin arrays: Part 3, heat transfer from fin-flats,” Bull. JSME, vol. 13, no. 64, pp. 1192–1200, 1970. DOI: https://doi.org/10.1299/jsme1958.13.1192.
- T. Aihara, “Natural convection heat transfer from vertical rectangular-fin arrays: Part 4, heat-transfer characteristics of nonisothermal-fin arrays,” Bull. JSME, vol. 14, no. 74, pp. 818–828, 1971. DOI: https://doi.org/10.1299/jsme1958.14.818.
- A. Bar-Cohen and W. Rohsenow, “Thermally optimum spacing of vertical, Natural Convection Cooled, Parallel Plates,” J. Heat Transfer, vol. 106, no. 1, pp. 116–123, 1984. DOI: https://doi.org/10.1115/1.3246622.
- N. Anand, S. Kim, and L. Fletcher, “The effect of plate spacing on free convection between heated parallel plates,” J. Heat Transfer (Trans. ASME (Am. Soc. Mech. Eng.), Ser. C); (United States), vol. 114, no. 2, pp. 515–518, 1992. DOI: https://doi.org/10.1115/1.2911306.
- R. W. Knight, J. S. Goodling, and D. J. Hall, “Optimal thermal design of forced convection heat sinks-analytical,” J. Electron. Packag., vol. 113, no. 3, pp. 313–321, 1991. DOI: https://doi.org/10.1115/1.2905412.
- P. Teertstra, M. Yovanovich, and J. Culham, “Analytical forced convection modeling of plate fin heat sinks,” J. Electron. Manufact., vol. 10, no. 04, pp. 253–261, 2000. DOI: https://doi.org/10.1142/S0960313100000320.
- S. Lee, “Optimum design and selection of heat sinks,” IEEE Trans. Comp. Packag. Manufact. Technol. A, vol. 18, no. 4, pp. 812–817, 1995. DOI: https://doi.org/10.1109/95.477468.
- R. Karvinen, “Natural and forced convection heat transfer from a plate fin,” Int. J. Heat Mass Transfer, vol. 24, no. 5, pp. 881–885, 1981. DOI: https://doi.org/10.1016/S0017-9310(81)80011-7.
- R. Karvinen, “Efficiency of straight fins cooled by natural or forced convection,” Int. J. Heat Mass Transfer, vol. 26, no. 4, pp. 635–638, 1983. DOI: https://doi.org/10.1016/0017-9310(83)90013-3.
- A. Al-Damook, N. Kapur, J. Summers and H. Thompson, “An experimental and computational investigation of thermal air flows through perforated pin heat sinks,” Appl. Therm. Eng., vol. 89, pp. 365–376, 2015. DOI: https://doi.org/10.1016/j.applthermaleng.2015.06.036.
- J. Choi, M. Jeong, J. Yoo and M. Seo, “A new CPU cooler design based on an active cooling heatsink combined with heat pipes,” Appl. Therm. Eng., vol. 44, pp. 50–56, 2012. DOI: https://doi.org/10.1016/j.applthermaleng.2012.03.027.
- A. M. Adham, N. Mohd-Ghazali and R. Ahmad, “Thermal and hydrodynamic analysis of microchannel heat sinks: A review,” Renew. Sustain. Energy Rev., vol. 21, pp. 614–622, 2013. DOI: https://doi.org/10.1016/j.rser.2013.01.022.
- D. Raghuraman, R. T. K. Raj, P. Nagarajan and B. Rao, “Influence of aspect ratio on the thermal performance of rectangular shaped micro channel heat sink using CFD code,” Alexandria Eng. J., vol. 56, no. 1, pp. 43–54, 2017. DOI: https://doi.org/10.1016/j.aej.2016.08.033.
- K.-T. Chiang and F.-P. Chang, “Application of response surface methodology in the parametric optimization of a pin-fin type heat sink,” Int. Commun. Heat Mass Transfer, vol. 33, no. 7, pp. 836–845, 2006. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2006.04.011.
- P. Naphon, S. Klangchart, and S. Wongwises, “Numerical investigation on the heat transfer and flow in the mini-fin heat sink for CPU,” Int. Commun. Heat Mass Transfer, vol. 36, no. 8, pp. 834–840, 2009. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2009.06.010.
- I. Tari and M. Mehrtash, “Natural convection heat transfer from inclined plate-fin heat sinks,” Int. J. Heat Mass Transfer, vol. 56, no. 1–2, pp. 574–593, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.08.050.
- G. Xia, D. Ma, Y. Zhai, Y. Li, R. Liu, and M. Du, “Experimental and numerical study of fluid flow and heat transfer characteristics in microchannel heat sink with complex structure,” Energy Convers. Manage., vol. 105, pp. 848–857, 2015. DOI: https://doi.org/10.1016/j.enconman.2015.08.042.
- S. M. Hoi, A. L. Teh, E. H. Ooi, I. M. L. Chew and J. J. Foo, “Plate-fin heat sink forced convective heat transfer augmentation with a fractal insert,” Int. J. Therm. Sci., vol. 142, pp. 392–406, 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2019.04.035.
- S. Huang, J. Zhao, L. Gong and X. Duan, “Thermal performance and structure optimization for slotted microchannel heat sink,” Appl. Therm. Eng., vol. 115, pp. 1266–1276, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2016.09.131.
- A. Moradikazerouni, M. Afrand, J. Alsarraf, S. Wongwises, A. Asadi and T. K. Nguyen, “Investigation of a computer CPU heat sink under laminar forced convection using a structural stability method,” Int. J. Heat Mass Transfer, vol. 134, pp. 1218–1226, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.029.
- W.-X. Chu, M.-K. Tsai, S.-Y. Jan, H.-H. Huang and C.-C. Wang, “CFD analysis and experimental verification on a new type of air-cooled heat sink for reducing maximum junction temperature,” Int. J. Heat Mass Transfer, vol. 148, pp. 119094, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.119094.
- A. Korzeń and D. Taler, “Modeling of transient response of a plate fin and tube heat exchanger,” Int. J. Therm. Sci., vol. 92, pp. 188–198, 2015. DOI: https://doi.org/10.1016/j.ijthermalsci.2015.01.036.
- A. Castelan, B. Cougo, S. Dutour and T. Meynard, “3D analytical modelling of plate fin heat sink on forced convection,” Math. Comput. Simulat., vol. 158, pp. 296–307, 2019. DOI: https://doi.org/10.1016/j.matcom.2018.09.011.
- M. Ekpu, “Finite element analysis of the effect of fin geometry on thermal performance of heat sinks in microelectronics,” J. Appl. Sci. Environ. Manage., vol. 23, no. 11, pp. 2059–2063, 2020. DOI: https://doi.org/10.4314/jasem.v23i11.24.
- K. Boukhadia, H. Ameur, D. Sahel and M. Bozit, “Effect of the perforation design on the fluid flow and heat transfer characteristics of a plate fin heat exchanger,” Int. J. Therm. Sci., vol. 126, pp. 172–180, 2018. DOI: https://doi.org/10.1016/j.ijthermalsci.2017.12.025.
- H. Ameur, D. Sahel and Y. Menni, “Numerical investigation of the performance of perforated baffles in a plate-fin heat exchanger,” Therm. Sci., no. 0, pp. 90–90, 2020. DOI: https://doi.org/10.2298/TSCI190316090A.