References
- R. L. Amalfi, F. Vakili-Farahani, and J. R. Thome, “Flow boiling and frictional pressure gradients in plate heat exchangers. Part 1: Review and experimental database,” Int. J. Refrig., vol. 61, pp. 166–184, 2016. DOI: https://doi.org/10.1016/j.ijrefrig.2015.07.010.
- S. Kakac and L. Hongtan, Heat Exchangers Selection, Ratings and Thermal Design. CRC Press: Boca Raton, 2002.
- J. R. Thome and J. Kim, Encyclopedia of Two-Phase Heat Transfer and Flow II. World Scientific Publishing Co. Pte. Ltd, 2014.
- Z. Ayub, “Plate heat exchanger literature survey and new heat transfer and pressure drop correlations for refrigerant evaporators,” Heat Transf. Eng., vol. 24, no. 5, pp. 3–16, 2003. DOI: https://doi.org/10.1080/01457630304056.
- J. R. García-Cascales, F. Vera-García, J. M. Corberán-Salvador, and J. Gonzálvez-Maciá, “Assessment of boiling and condensation heat transfer correlations in the modelling of plate heat exchangers,” Int. J. Refrig., vol. 30, no. 6, pp. 1029–1041, 2007. DOI: https://doi.org/10.1016/j.ijrefrig.2007.01.004.
- F. Táboas, M. Vallès, M. Bourouis, and A. Coronas, “Assesment of boiling heat transfer and pressure drop correlations of ammonia/water mixture in a plate heat exchanger,” Int. J. Refrig. Int. Du Froid, vol. 35, no. 3, pp. 633–644, 2012. DOI: https://doi.org/10.1016/j.ijrefrig.2011.10.003.
- Y.-Y. Yan and T.-F. Lin, “Evaporation heat transfer and pressure drop of refrigerant R-134a in a plate heat exchanger,” J. Heat Transf., vol. 121, no. 1, pp. 118–127, 1999. DOI: https://doi.org/10.1115/1.2825924.
- D.-H. Han, K.-J. Lee, and Y.-H. Kim, “Experiments on the characteristics of evaporation of R410A in brazed plate heat exchangers with different geometric configurations,” Appl. Therm. Eng., vol. 23, no. 10, pp. 1209–1225, 2003. DOI: https://doi.org/10.1016/S1359-4311(03)00061-9.
- Y. Y. Hsieh and T. F. Lin, “Evaporation heat transfer and pressure drop of refrigerant R-410A flow in a vertical plate heat exchanger,” J. Heat Transf., vol. 125, no. 5, pp. 852–857, 2003. DOI: https://doi.org/10.1115/1.1518498.
- H. J. Kim, L. Liebenberg, and A. M. Jacobi, “Thermal-hydraulic performance of R-134a boiling at low mass fluxes in a small vertical brazed plate heat exchanger,” 2017. DOI: https://doi.org/10.1115/HT2017-5083.
- G. Longo and A. Gasparella, “Heat transfer and pressure drop during HFC refrigerant vaporisation inside a brazed plate heat exchanger,” Int. J. Heat Mass Transf., vol. 50, no. 25–26, pp. 5194–5203, 2007. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.07.001.
- B. Palm and J. Claesson, “Plate heat exchangers: Calculation methods for single and two-phase flow,” Heat Transf. Eng., vol. 27, no. 4, pp. 88–98, 2006. DOI: https://doi.org/10.1080/01457630500523949.
- E. Lee, H. Kang, and Y. Kim, “Flow boiling heat transfer and pressure drop of water in a plate heat exchanger with corrugated channels at low mass flux conditions,” Int. J. Heat Mass Transf., vol. 77, pp. 37–45, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.05.019.
- B. Thonon, R. Vidil, and C. Marvillet, “Recent research and developments in plate heat exchangers,” J. Enhanc. Heat Transf., vol. 2, no. 1–2, pp. 149–155, 1995. [Database] DOI: https://doi.org/10.1615/JEnhHeatTransf.v2.i1-2.160.
- S. Jin and P. Hrnjak, “A new method to simultaneously measure local heat transfer and visualize flow boiling in plate heat exchanger,” Int. J. Heat Mass Transf., vol. 113, pp. 635–646, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.116.
- Y. Y. Hsieh, L. J. Chiang, and T. F. Lin, “Subcooled flow boiling heat transfer of R-134a and the associated bubble characteristics in a vertical plate heat exchanger,” Int. J. Heat Mass Transf., vol. 45, no. 9, pp. 1791–1806, 2002. DOI: https://doi.org/10.1016/S0017-9310(01)00294-0.
- X. Zhu and F. Haglind, “Computational fluid dynamics modeling of liquid–gas flow patterns and hydraulics in the cross-corrugated channel of a plate heat exchanger,” Int. J. Multiph. Flow, vol. 122, p. 103163, 2020. DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2019.103163.
- H. Su, C. Hu, Z. Gao, T. Hu, G. Wang, and W. Yu. “Phase change and heat transfer characteristics of a corrugated plate heat exchanger,” Processes, vol. 8, no. 1, pp. 26, 2020. DOI:https://doi.org/10.3390/pr8010026.
- S. C. K. De Schepper, G. J. Heynderickx, and G. B. Marin, “CFD modeling of all gas–liquid and vapor–liquid flow regimes predicted by the Baker chart,” Chem. Eng. J., vol. 138, no. 1–3, pp. 349–357, 2008. DOI: https://doi.org/10.1016/j.cej.2007.06.007.
- M. C. Georgiou and A. M. Bonanos, “A transient model for forward and parallel feed MED,” Desalin. Water Treat., vol. 57, no. 48–49, pp. 23119–23131, 2016. DOI: https://doi.org/10.1080/19443994.2016.1180480.
- M. Georgiou, A. Bonanos, and J. Georgiadis, “Experimental evaluation of a multiple-effect distillation unit in low seawater flow conditions,” Desalin. Water Treat., vol. 55, pp. 1–10, 2014. DOI: https://doi.org/10.1080/19443994.2014.940638.
- V. Gullapalli and B. Sunden, “CFD simulation of heat transfer and pressure drop in compact brazed plate heat exchangers,” Heat Transf. Eng., vol. 35, no. 4, pp. 358–366, 2014. DOI: https://doi.org/10.1080/01457632.2013.828557.
- W. Han, K. Saleh, V. Aute, G. Ding, Y. Hwang, and R. Radermacher, “Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations,” HVAC&R Res., vol. 17, no. 2, pp. 186–197, 2011. DOI: https://doi.org/10.1080/10789669.2011.558167.
- Alfa Laval M3 Gasketed plate-and-frame heat exchanger. Available: https://www.alfalaval.com/globalassets/documents/microsites/heating-and-cooling-hub/pd-leaflets–-gasketed/m3.pdf.
- ANSYS Semi Mechanistic Wall Boiling Model. In ANSYS fluent theory guide, pp. 673–675, 2020.
- J. C. Chen, “Correlation for boiling heat transfer to saturated fluids in convective flow,” Ind. Eng. Chem. Proc. Des. Dev., vol. 5, no. 3, pp. 322–329, 1966. DOI: https://doi.org/10.1021/i260019a023.
- W.-H. Lee, A Pressure Iteration Scheme for Two-Phase Modeling. Los Alamos, NM: Los Alamos Scientific Laboratory 1979.
- ANSYS Fluent Theory Guide, R1 ed. 2020.
- F. Moukalled, S. Verma, and M. Darwish, “The use of CFD for predicting and optimizing the performance of air conditioning equipment,” Int. J. Heat Mass Transf., vol. 54, no. 1–3, pp. 549–563, 2011. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.09.015.
- ANSYS Fluent User Guide, R1 ed. 2020.
- S. Das and H. Punekar, “On development of a semimechanistic wall boiling model,” J. Heat Transf., vol. 138, no. 6, pp. 061501, 2016. DOI: https://doi.org/10.1115/1.4032833.
- H. K. Forster and N. Zuber, “Dynamics of vapor bubbles and boiling heat transfer,” AIChE J., vol. 1, no. 4, pp. 531–535, 1955. DOI: https://doi.org/10.1002/aic.690010425.
- H. Steiner, A. Kobor, and L. Gebhard, “A wall heat transfer model for subcooled boiling flow,” Int. J. Heat Mass Transf., vol. 48, no. 19–20, pp. 4161–4173, 2005. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2005.03.032.
- S. C. K. De Schepper, G. J. Heynderickx, and G. B. Marin, “Modeling the evaporation of a hydrocarbon feedstock in the convection section of a steam cracker,” Comput. Chem. Eng., vol. 33, no. 1, pp. 122–132, 2009. DOI: https://doi.org/10.1016/j.compchemeng.2008.07.013.
- K. Nayar, D. Panchanathan, G. Mckinley, and J. Lienhard, “Surface tension of seawater,” J. Phys. Chem. Ref. Data, vol. 43, 2015. DOI: https://doi.org/10.1063/1.4899037.
- M. H. Sharqawy, J. H. Lienhard, and S. M. Zubair, “Thermophysical properties of seawater: A review of existing correlations and data,” Desalin. Water Treat., vol. 16, no. 1–3, pp. 354–380, 2010. DOI: https://doi.org/10.5004/dwt.2010.1079.
- R. L. Amalfi, F. Vakili-Farahani, and J. R. Thome, “Flow boiling and frictional pressure gradients in plate heat exchangers. Part 2: Comparison of literature methods to database and new prediction methods,” Int. J. Refrig., vol. 61, pp. 185–203, 2016. DOI: https://doi.org/10.1016/j.ijrefrig.2015.07.009.
- V. D. Donowski and S. G. Kandlikar, “Correlating evaporation heat transfer coefficient of refrigerant R-134a in a plate heat exchanger,” Engineering Foundation Conference on Pool and Flow Boiling, Alaska, Paper 154, 2000.
- W. Li, B. Zheng, T. Lv, and Z. Ayub, “A modified correlation for flow boiling heat transfer in plate heat exchangers,” J. Therm. Sci. Eng. Appl., vol. 12, no. 6, pp. 1–16, 2020. DOI: https://doi.org/10.1115/1.4046786.
- B. Ouazia, “Evaporation heat transfer and pressure drop of HFC-134a inside a plate heat exchanger,” Am. Soc. Mech. Eng. Process Ind. Div. PID, vol. 6, pp. 115–123, 2001.
- M. S. Khan, T. S. Khan, M.-C. Chyu, and Z. H. Ayub, “Experimental investigation of evaporation heat transfer and pressure drop of ammonia in a 30° chevron plate heat exchanger,” Int. J. Refrig., vol. 35, no. 6, pp. 1757–1765, 2012. . DOI: https://doi.org/10.1016/j.ijrefrig.2012.05.019.