Reference
- BP Energy Outlook, 2020 Edition. London, United Kingdom: BP Energy Outlook, 2020.
- R. K. Shah and D. P. Sekulic, Fundamentals of Heat Exchanger Design. Hoboken, NJ, USA: John Wiley & Sons, 2003.
- I. Warren, “Ljungstrom heat exchangers for waste heat recovery,” J. Heat Recovery Syst., vol. 2, no. 3, pp. 257–271, 1982. DOI: https://doi.org/10.1016/0198-7593(82)90019-4.
- A. Shahsavar and S. Khanmohammadi, “Energy and economic evaluation and multicriteria optimization of different arrangements of integrated photovoltaic thermal and heat recovery wheel system,” Int. J. Energy Res., vol. 44, no. 3, pp. 1488–1505, 2020. DOI: https://doi.org/10.1002/er.4899.
- X. Zhang, et al., “Estimation of the direct leakage of rotary air preheaters based on temperature distribution modeling,” Int. J. Heat Mass Transfer, vol. 134, pp. 119–130, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.172.
- X. Du, Y. Shi, and X. Wang, “Coupled characterization and experimental verification of heat transfer and air leakage in a quad-sectional rotary air preheater,” Appl. Therm. Eng., vol. 159, pp. 113923, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.113923.
- L. Wang, et al., “Investigation on regenerative heat exchanger with novel low-leakage system for flue gas denitration in steel industry,” Appl. Therm. Eng., vol. 178, pp. 115483, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115483.
- Z. Chen, et al., “A novel flexible seal technology and its application in heat transfer of rotary air preheater,” Appl. Therm. Eng., vol. 163, pp. 114414, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114414.
- L. Wang, et al., “A novel design of rotary regenerative condensing heat exchanger for the dehydration from high humidity flue gas,” Int. J. Heat Mass Transfer, vol. 131, pp. 517–526, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.11.080.
- K. Özdemir and M. F. Serincan, “A computational fluid dynamics model of a rotary regenerative heat exchanger in a flue gas desulfurization system,” Appl. Therm. Eng., vol. 143, pp. 988–1002, 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.08.011.
- A. A. Boroujerdi and M. Esmaeili, “Characterization of the frictional losses and heat transfer of oscillatory viscous flow through wire-mesh regenerators,” Alexandria Eng. J., vol. 54, no. 4, pp. 787–794, 2015. DOI: https://doi.org/10.1016/j.aej.2015.06.001.
- A. R. Makarov and V. G. Merzlikin, “Simulation of characteristics of thermo-hydraulic process in porous-net matrix of rotary heat exchanger,” Global J. Pure Appl. Math., vol. 12, no. 4, pp. 2829–2838, 2016.
- A. Akbari, S. Kouravand, and G. Chegini, “Experimental analysis of a rotary heat exchanger for waste heat recovery from the exhaust gas of dryer,” Appl. Therm. Eng., vol. 138, pp. 668–674, 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.04.103.
- S. Sanaye and H. Hajabdollahi, “Multi-objective optimization of rotary regenerator using genetic algorithm,” Int. J. Therm. Sci, vol. 48, no. 10, pp. 1967–1977, 2009. DOI: https://doi.org/10.1016/j.ijthermalsci.2009.02.008.
- R. Rao and V. Patel, “Design optimization of rotary regenerator using artificial bee colony algorithm,” Proc. Institution Mech. Engineers, Part A: J. Power Energy, p. 0957650911407817, 2011.
- B. D. Raja, R. Jhala, and V. Patel, “Multi-objective optimization of a rotary regenerator using tutorial training and self-learning inspired teaching-learning based optimization algorithm (TS-TLBO),” Appl. Therm. Eng., vol. 93, pp. 456–467, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2015.10.013.
- J. Dallaire, L. Gosselin, and A. K. Da Silva, “Conceptual optimization of a rotary heat exchanger with a porous core,” Int. J. Therm. Sci., vol. 49, no. 2, pp. 454–462, 2010. DOI: https://doi.org/10.1016/S1473-3099(21)00397-2.
- N. Baruah and K. G. V. Prasanna, “Numerical modeling of regenerative rotary heat exchanger: A review,” J. Biosystems Eng., vol. 42, no. 1, pp. 44–55, 2017. DOI: https://doi.org/10.5307/JBE.2017.42.1.044.
- M. N. Strasser and R. P. Selvam, “A cost and performance comparison of packed bed and structured thermocline thermal energy storage systems,” Solar Energy, vol. 108, pp. 390–402, 2014. DOI: https://doi.org/10.1016/j.solener.2014.07.023.
- L. Wang, L. Deng, C. Tang, Q. Fan, C. Wang, and D. Che, “Thermal deformation prediction based on the temperature distribution of the rotor in rotary air-preheater,” Appl. Therm. Eng., vol. 90, pp. 478–488, 2015. DOI: https://doi.org/10.1016/j.applthermaleng.2015.07.021.
- A. Paul, L. Shi, and C. W. Bielawski, “A eutectic mixture of galactitol and mannitol as a phase change material for latent heat storage,” Energy Convers. Manage., vol. 103, pp. 139–146, 2015. DOI: https://doi.org/10.1016/j.enconman.2015.06.013.
- I. Gonzalez, “Thermo-mechanical parametric analysis of packed-bed thermocline energy storage tanks,” Appl. Energy, vol. 179, pp. 1106–1122, 2016.
- S. M. Flueckiger, Z. Yang, and S. V. Garimella, “Thermomechanical simulation of the solar one thermocline storage tank,” J. Solar Energy Eng.-Trans. ASME, vol. 134, no. 4, p. 041014, 2012. DOI: https://doi.org/10.1115/1.4007665.
- U. Pelay, et al., “Thermal energy storage systems for concentrated solar power plants,” Renewable Sustainable Energy Rev., vol. 79, pp. 82–100, 2017. DOI: https://doi.org/10.1016/j.rser.2017.03.139.
- G. Zanganeh, et al., “Stabilization of the outflow temperature of a packed-bed thermal energy storage by combining rocks with phase change materials,” Appl. Therm. Eng., vol. 70, no. 1, pp. 316–320, 2014. DOI: https://doi.org/10.1016/j.applthermaleng.2014.05.020.
- G. Alva, et al., “Thermal energy storage materials and systems for solar energy applications,” Renewable Sustainable Energy Rev., vol. 68, pp. 693–706, 2017. DOI: https://doi.org/10.1016/j.rser.2016.10.021.
- G. Zanganeh, et al., “Experimental and numerical investigation of combined sensible-latent heat for thermal energy storage at 575 degrees C and above,” Solar Energy, vol. 114, pp. 77–90, 2015. DOI: https://doi.org/10.1016/j.solener.2015.01.022.
- P. A. Galione, et al., “Multi-layered solid-PCM thermocline thermal storage for CSP Numerical evaluation of its application in a 50 MWe plant,” Solar Energy, vol. 119, pp. 134–150, 2015. DOI: https://doi.org/10.1016/j.solener.2015.06.029.
- P. A. Galione, et al., “Multi-layered solid-PCM thermocline thermal storage concept for CSP plants. Numerical analysis and perspectives,” Appl. Energy, vol. 142, pp. 337–351, 2015. DOI: https://doi.org/10.1016/j.apenergy.2014.12.084.
- L. Geissbuhler, et al., “Analysis of industrial-scale high-temperature combined sensible/latent thermal energy storage,” Appl. Therm. Eng., vol. 101, pp. 657–668, 2016.
- B.-c. Zhao, et al., “Thermal performance and cost analysis of a multi-layered solid-PCM thermocline thermal energy storage for CSP tower plants,” Appl. Energy, vol. 178, pp. 784–799, 2016. DOI: https://doi.org/10.1016/j.apenergy.2016.06.034.
- N. Ahmed, et al., “Thermal and economic evaluation of thermocline combined sensible-latent heat thermal energy storage system for medium temperature applications,” Energy Convers. Manage., vol. 189, pp. 14–23, 2019. DOI: https://doi.org/10.1016/j.enconman.2019.03.040.
- N. Ahmed, et al., “Numerical characterization of thermocline behaviour of combined sensible-latent heat storage tank using brick manganese rod structure impregnated with PCM capsules,” Solar Energy, vol. 180, pp. 243–256, 2019. DOI: https://doi.org/10.1016/j.solener.2019.01.001.
- K. Nithyanandam and R. Pitchumani, “Optimization of an encapsulated phase change material thermal energy storage system,” Solar Energy, vol. 107, pp. 770–788, 2014. DOI: https://doi.org/10.1016/j.solener.2014.06.011.
- S. M. Flueckiger and S. V. Garimella, “Latent heat augmentation of thermocline energy storage for concentrating solar power - A system-level assessment,” Appl. Energy, vol. 116, pp. 278–287, 2014. DOI: https://doi.org/10.1016/j.apenergy.2013.11.059.
- M. Wu, C. Xu, and Y. He, “Cyclic behaviors of the molten-salt packed-bed thermal storage system filled with cascaded phase change material capsules,” Appl. Therm. Eng., vol. 93, pp. 1061–1073, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2015.10.014.
- Y. Bu, et al., “Numerical analysis of ABS deposition and corrosion on a rotary air preheater,” Appl. Therm. Eng., vol. 131, pp. 669–677, 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2017.11.082.
- W. Minkowycz, A. Haji-Sheikh, and K. Vafai, “On departure from local thermal equilibrium in porous media due to a rapidly changing heat source: The Sparrow number,” Int. J. Heat Mass Transfer, vol. 42, no. 18, pp. 3373–3385, 1999. DOI: https://doi.org/10.1016/S0017-9310(99)00043-5.
- V. Becattini and A. Haselbacher, “Toward a new method for the design of combined sensible/latent thermal-energy storage using non-dimensional analysis,” Appl. Energy, vol. 247, pp. 322–334, 2019. DOI: https://doi.org/10.1016/j.apenergy.2019.03.022.
- J. T. Van Lew, et al., “Analysis of heat storage and delivery of a thermocline tank having solid filler material,” J. Solar Energy Eng.-Trans. ASME, vol. 133, no. 2, p. 021003, 2011. DOI: https://doi.org/10.1115/1.4003685.
- A. F. Regin, S. C. Solanki, and J. S. Saini, “An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigation,” Renewable Energy, vol. 34(7), pp. 1765–1773, 2009.
- C. Xu, et al., “Sensitivity analysis of the numerical study on the thermal performance of a packed-bed molten salt thermocline thermal storage system,” Appl. Energy, vol. 92, pp. 65–75, 2012. DOI: https://doi.org/10.1016/j.apenergy.2011.11.002.
- B. Alazmi and K. Vafai, “Analysis of variants within the porous media transport models,” J. Heat Transfer-Trans. ASME, vol. 122, no. 2, pp. 303–326, 2000. DOI: https://doi.org/10.1115/1.521468.
- M. Wu, C. Xu, and Y.-L. He, “Dynamic thermal performance analysis of a molten-salt packed-bed thermal energy storage system using PCM capsules,” Appl. Energy, vol. 121, pp. 184–195, 2014. DOI: https://doi.org/10.1016/j.apenergy.2014.01.085.
- L. V. Kim, “Determination of the heat transfer coefficients in porous media,” J. Eng. Phys. Thermophys., vol. 65, no. 6, pp. 1168–1172, 1993. DOI: https://doi.org/10.1007/BF00861937.
- N. Wakao, S. Kaguei, and T. Funazkri, “Effect of fluid dispersion coefficients on particle-to-fluid heat transfer coefficients in packed beds: Correlation of Nusselt numbers,” Chem. Eng. Sci., vol. 34, no. 3, pp. 325–336, 1979. DOI: https://doi.org/10.1016/0009-2509(79)85064-2.
- N. Wakao and T. Funazkri, “Effect of fluid dispersion coefficients on particle-to-fluid mass-transfer coefficients in packed-beds - Correlation of Sherwood numbers,” Chem. Eng. Sci., vol. 33, no. 10, pp. 1375–1384, 1978. DOI: https://doi.org/10.1016/0009-2509(78)85120-3.
- N. Nallusamy, S. Sampath, and R. Velraj, “Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources,” Renewable Energy, vol. 32(7), pp. 1206–1227, 2007.