References
- F. P. Incropera, D. P. DeWitt, T. L. Bergman, and A. S. Lavine, Fundamentals of Heat and Mass Transfer. Hoboken: Wiley, 2007.
- I. Elbadawy, M. Elsebay, M. Shedid, and M. Fatouh, “Reliability of nanofluid concentration on the heat transfer augmentation in engine radiator,” Int. J. Automot. Technol., vol. 19, no. 2, pp. 233–243, 2018. DOI: https://doi.org/10.1007/s12239-018-0022-3.
- G. Huminic and A. Huminic, “Numerical analysis of laminar flow heat transfer of nanofluids in a flattened tube,” Int. Commun. Heat Mass Transf., vol. 44, pp. 52–57, 2013. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2013.03.003.
- S. Hamed and A. Abbas, “Effects of tube flattening on the fluid dynamic and heat transfer performance of nanofluids,” Adv. Powder Technol., vol. 25, pp. 1132–1141, 2014.
- A. P. Frass, Heat Exchanger Design, 2nd ed. New York: John Wiley & Sons Inc., 1989.
- G. Huminic and A. Huminic, “The heat transfer performances and entropy generation analysis of hybrid nanofluids in a flattened tube,” Int. J. Heat Mass Transf., vol. 119, pp. 813–827, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.155.
- P. Sharmaa, V. Kumarb, G. Sokhala, G. Dasarojud, and V. Bulasarae, “Numerical study on performance of flat tube with water based copper oxide nanofluids,” Mater. Today: Proc., vol. 21, pp. 1800–1808, 2020.
- R. Taylor, S. Coulombe, T. Otanicar, P. Phelan, and A. Gunawan, “Small particles, big impacts: a review of the diverse applications of nanofluids,” J. Appl. Phys., vol. 113, pp. 011301–19, 2013.
- Y. Gao, H. Wang, A. P. Sasmito, and A. S. Mujumdar, “Measurement and modeling of thermal conductivity of graphene nanoplatelet water and ethylene glycol base nanofluids,” Int. J. Heat Mass Transf., vol. 123, pp. 97–109, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.02.089.
- S. A. Ahmed, M. Ozkaymak, A. Sözen, T. Menlik, and A. Fahed, “Improving car radiator performance by using TiO2–water nanofluid,” Eng. Sci. Technol. Int. J., 2018.
- M. Elsebay, I. Elbadawy, M. H. Shedid, and M. Fatouh, “Numerical resizing study of Al2O3 and CuO nanofluids in the flat tubes of a radiator,” Appl. Math. Model., vol. 40, no. 13–14, pp. 6437–6450, 2016. DOI: https://doi.org/10.1016/j.apm.2016.01.039.
- K. Khanafer and K. Vafai, “A review on the applications of nanofluids in solar energy field,” Renew. Energy, vol. 123, pp. 398–406, 2018. DOI: https://doi.org/10.1016/j.renene.2018.01.097.
- B. Yuan, R. G. Moghanloo, and W. Wang, “Using nanofluids to control fines migration for oil recovery: nanofluids co-injection or nanofluids pre-flush? A comprehensive answer,” Fuel, vol. 215, pp. 474–483, 2018. DOI: https://doi.org/10.1016/j.fuel.2017.11.088.
- T. V. V. L. N. Rao, A. M. A. Rani, A. Sufian, and N. M. Mohamed, “Thin film hydrodynamic bearing analysis using nanoparticle additive lubricants,” Engineering Applications of Nanotechnology: From Energy to Drug Delivery. Cham: Springer, 2017, pp. 149–173.
- A. K. Tasueef and A. Hassaan, “CFD-based comparative performance analysis of different nanofluids used in automobile radiators,” Arabian J. Sci. Eng., vol. 44, pp. 5787–5799, 2019.
- S. Sobin, S. R. Sarath, R. Anjan, and K. Krishnakumar, “Experimental and numerical study on heat transfer enhancement of flat tube radiator using Al2O3 and CuO nanofluids.” Heat Mass Transf., vol. 53, no. 12, pp. 1–19, 2017.
- R. R. Sahoo, P. Ghosh, and J. Sarkar, “Energy and exergy comparisons of water based optimum brines as coolants for rectangular fin automotive radiator,” Int. J. Heat Mass Transf., vol. 105, pp. 690–696, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.10.034.
- S. M. Peyghambarzadeh, S. H. Hashemabadi, S. M. Hoseini, and J. M. Seifi, “Experimental study of heat transfer enhancement using water/ethylene glycol based nanofluids as a new coolant for car radiators,” Int. Commun. Heat Mass Transf., vol. 38, pp. 283–1290, 2011.
- R. R. Sahoo and J. Sarkar, “Heat transfer performance characteristics of hybrid nanofluids as coolant in louvered fin automotive radiator,” Heat Mass Transfer., vol. 53, no. 6, pp. 1923–1931, 2017. DOI: https://doi.org/10.1007/s00231-016-1951-x.
- X. Zhou, Y. Wang, Z. Kai, and H. Huang, “Comparison of heat transfer performance of ZnO–PG, a-Al2O3–PG, and g-Al2O3–PG nanofluids in car radiator,” Nanomater. Nanotechnol., vol. 9, pp. 184798041987646, 2019. DOI: https://doi.org/10.1177/1847980419876465.
- A. Falahat and A. Vosough, “Effect of nanofluid on entropy generation and pumping power in coiled tube,” J. Thermophys. Heat Transf., vol. 26, no. 1, pp. 141–146, 2012. DOI: https://doi.org/10.2514/1.T3771.
- M. A. Vinod, R. Nagaraj, and O. D. Hebbal, “CFD analysis of heat transfer enhancement of a car radiator using nanofluid as a coolant,” Int. J. Eng. Res. Technol., vol. 3, no. 8, pp. 2278, 2014.
- A. M. Hussein, R. A. Bakar, and K. Kadirgama, “Study of forced convection nanofluid heat transfer in the automotive cooling system,” Case Stud. Therm. Eng., vol. 2, pp. 50–61, 2014. DOI: https://doi.org/10.1016/j.csite.2013.12.001.
- S. Maiga, S. J. Palm, C. T. Nguyen, G. Roy, and N. Galanis, “Heat transfer enhancement by using nanofluids in forced convection flows,” Int. J. Heat Fluid Flow, vol. 26, no. 4, pp. 530–546, 2005. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2005.02.004.
- A. Akbarinia and A. Behzadmehr, “Numerical study of laminar mixed convection of a nanofluid in horizontal curved tubes,” Appl. Therm. Eng., vol. 27, no. 8–9, pp. 1327–1337, 2007. DOI: https://doi.org/10.1016/j.applthermaleng.2006.10.034.
- P. Kumar, “A CFD study of heat transfer enhancement in pipe flow with Al2O3 nanofluid,” World Acad. Sci., vol. 81, pp. 746–750, 2011.
- R. S. Vajjha, D. K. Das, and P. K. Namburu, “Numerical study of fluid dynamic and heat transfer performance of Al2O3 and CuO nanofluids in the flat tubes of a radiator,” Int. J. Heat Fluid Flow, vol. 31, no. 4, pp. 613–621, 2010. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2010.02.016.
- P. H. Oosthuizen and D. Naylor, Introduction to Convective Heat Transfer Analysis. New York: McGraw-Hill, 1999.
- M. K. Moraveji and R. M. Ardehali, “CFD modeling (comparing single and two-phase approaches) on thermal performance of Al2O3/water nanolfuid in mini-channel heat sink,” Int. Commun. Heat Mass Transf., vol. 44, pp. 157–164, 2013. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2013.02.012.
- ANSYS FLUENT 19.0, User Guide, ANSYS, Inc., Southpointe, Canonsburg, November, 2019.
- S. V. Patankar, Numerical Heat Transfer and Fluid Flow, 1st ed. Washington, USA: Hemisphere, 1980.
- Y. Xuan and W. Roetzel, “Conceptions for heat transfer correlation of nanofluids,” Int. J. Heat Mass Transf., vol. 43, no. 19, pp. 3701–3707, 2000. DOI: https://doi.org/10.1016/S0017-9310(99)00369-5.
- H. V. Patel, D. G. Subhedra, and B. Ramani, “Numerical investigation of performance for car oval tube,” presented at the International Conference on Recent Trend in Engineering and Material Science (ICEMS-2016), 2017, Pp. 9384–9389. DOI: https://doi.org/10.1016/j.matpr.2017.06.190.
- G. Huminic and A. Huminic, “The cooling performances evaluation of nano-fluids in a compact heat exchanger,” SAE Technical Paper, vol. 1045, 2012.
- X. Wang, X. Xu, and S. U. S. Choi, “Thermal conductivity of nanoparticles–fluid mixture,” J. Thermophys. Heat Transf., vol. 13, no. 4, pp. 474–480, 1999. DOI: https://doi.org/10.2514/2.6486.
- W. Duangthongsuk and S. Wongwises, “Comparison of the effects of measured and computed thermophysical properties of nanofluids on heat transfer performance,” Exp. Therm. Fluid Sci., vol. 34, no. 5, pp. 616–624, 2010. DOI: https://doi.org/10.1016/j.expthermflusci.2009.11.012.
- Nanostructured & Amorphous Materials, I., 2020. http://www.nanoamor.com/.
- ASHRAE, ASHRAE Handbook: Fundamentals, American Society of Heating, Refrigerating and Air-Conditioning. Atlanta, GA: Engineers Inc., 2013.
- A. K. Satapathy, “Thermodynamic optimization of a coiled tube heat exchanger under constant wall heat flux condition,” Energy, vol. 34, no. 9, pp. 1122–1126, 2009. DOI: https://doi.org/10.1016/j.energy.2009.04.028.
- S. Rostami, N. Ahmadi, and S. Khorasani, “Experimental investigations of thermo-exergitic behavior of a four-start helically corrugated heat exchanger with air/water two-phase flow,” Int. J. Therm. Sci., vol. 145, pp. 106030, 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2019.106030.
- G. S. Sokhal, D. Gangacharyulu, and V. K. Bulasara, “Heat transfer and pressure drop performance of alumina–water nanofluid in a flat vertical tube of a radiator,” Chem. Eng. Commun., vol. 205, pp. 257–268, 2018.
- H. H. Ting and S. S. Hou, “Numerical study of laminar flow forced convection of waterAl2O3 nanofluids under constant wall temperature condition,” Math Problems Eng., vol. 2015, pp. 1–8, 2015. DOI: https://doi.org/10.1155/2015/180841.
- M. M. Heyhat, F. Kowsary, A. M. Rashidi, M. H. Momenpour, and A. Amrollahi, “Experimental investigation of laminar convective heat transfer and pressure drop of water-based Al2O3 nanofluids in fully developed flow regime,” Exp. Therm. Fluid Sci., vol. 44, pp. 483–489, 2013. DOI: https://doi.org/10.1016/j.expthermflusci.2012.08.009.