References
- T. E. Schmidt, “Heat transfer calculations for extended surfaces,” Refrigerat. Eng., vol. 49, pp. 351–357, 1949.
- D. Q. Kern and A. D. Kraus, Extended Surface Heat Transfer. New York, NY: McGraw-Hill, Inc, 1972.
- C. Arslanturk, “A decomposition method for fin efficiency of convective straight fins with temperature-dependent thermal conductivity,” Int. J. Heat Mass Transfer, vol. 32, no. 6, pp. 831–841, 2005. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2004.10.006.
- A. Ravanji and M. R. Zargarabadi, “Effects of pin-fin shape on cooling performance of a circular jet impinging on a flat surface,” Int. J. Therm. Sci., vol. 161, pp. 106684, 2021. DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106684.
- A. A. Joneidi, D. D. Ganji, and M. Babaelahi, “Differential transformation method to determine fin efficiency of convective straight fins with temperature dependent thermal conductivity,” Int. Commun. Heat Mass Transfer, vol. 36, no. 7, pp. 757–762, 2009. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2009.03.020.
- D. B. Kulkarni and M. M. Joglekar, “Residue minimization technique to analyze the efficiency of convective straight fins having temperature-dependent thermal conductivity,” Appl. Math. Comput., vol. 215, no. 6, pp. 2184–2191, 2009. DOI: https://doi.org/10.1016/j.amc.2009.08.011.
- C. Cortes, L. I. Dıez, and A. Campo, “Efficiency of composite fins of variable thickness,” Int. J. Heat Mass Transfer, vol. 51, no. 9–10, pp. 2153–2166, 2008. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.11.004.
- J. L. Threlkeld, Thermal Environmental Engineering. New York, NY: Prentice-Hall, Inc., 1970.
- C. C. Wang, Y. C. Hsieh, and Y. T. Lin, “Performance of plate finned tube heat exchangers under dehumidifying conditions,” J. Heat Transfer, vol. 119, no. 1, pp. 109–117, 1997. DOI: https://doi.org/10.1115/1.2824075.
- P. Pongsoi, S. Pikulkajorn, and S. Wongwises, “Effect of fin pitches on the optimum heat transfer performance of crimped spiral fin-and-tube heat exchangers,” Int. J. Heat Mass Transfer, vol. 55, no. 23–24, pp. 6555–6566, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.06.061.
- P. Pongsoi, S. Pikulkajorn, C. C. Wang, and S. Wongwises, “Effect of number of tube rows on the air-side performance of crimped spiral fin-and-tube heat exchanger with a multipass parallel and counter cross-flow configuration,” Int. J. Heat Mass Transfer, vol. 55, no. 4, pp. 1403–1411, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2011.09.064.
- W. Pirompugd, S. Wongwises, and C. C. Wang, “A tube-by-tube reduction method for simultaneous heat and mass transfer characteristics for plain fin-and-tube heat exchangers in dehumidifying conditions,” Heat Mass Transfer, vol. 41, no. 8, pp. 756–765, 2005. DOI: https://doi.org/10.1007/s00231-004-0581-x.
- W. Pirompugd, S. Wongwises, and C. C. Wang, C.C, “Simultaneous heat and mass transfer characteristics for wavy fin-and-tube heat exchangers under dehumidifying conditions,” Int. J. Heat Mass Transfer, vol. 49, no. 1–2, pp. 132–143, 2006. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2005.05.043.
- W. Pirompugd, W. C. C. Wang, and S. Wongwises, “A fully wet and fully dry tiny circular fin method for heat and mass transfer characteristics for plain fin-and-tube heat exchangers under dehumidifying conditions,” J. Heat Transfer, vol. 129, no. 9, pp. 1256–1267, 2007. DOI: https://doi.org/10.1115/1.2739589.
- W. Pirompugd, W. C. C. Wang, and S. Wongwises, “Heat and mass transfer characteristics for finned tube heat exchangers with humidification,” J. Thermophysics Heat Transfer, vol. 21, no. 2, pp. 361–371, 2007. DOI: https://doi.org/10.2514/1.24170.
- S. Y. Liang, T. N. Wong, and G. K. Nathan, “Comparison of one-dimensional and two-dimensional models for wet-surface fin efficiency of a plate-fin-tube heat exchanger,” Appl. Therm. Eng., vol. 20, no. 10, pp. 941–962, 2000. DOI: https://doi.org/10.1016/S1359-4311(99)00078-2.
- W. Pirompugd, C. C. Wang, and S. Wongwises, “Finite circular fin method for heat and mass transfer characteristics for plain fin-and-tube heat exchangers under fully and partially wet surface conditions,” Int. J. Heat Mass Transfer, vol. 50, no. 3–4, pp. 552–565, 2007. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.07.017.
- W. Pirompugd, C. C. Wang, and S. Wongwises, “Finite circular fin method for wavy fin-and-tube heat exchangers under fully and partially wet surface conditions,” Int. J. Heat Mass Transfer, vol. 51, no. 15–16, pp. 4002–4017, 2008. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.11.049.
- W. Pirompugd, C. C. Wang, and S. Wongwises, “Correlations for wet surface ratio of fin-and-tube heat exchangers,” Int. J. Heat Mass Transfer, vol. 53, no. 1–3, pp. 568–573, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.09.025.
- W. Pirompugd, C. C. Wang, and S. Wongwises, “A review on reduction method for heat and mass transfer of fin-and-tube heat exchangers under dehumidifying conditions,” Int. J. Heat Mass Transfer, vol. 52, no. 9–10, pp. 2370–2378, 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2008.10.019.
- W. Pirompugd, C.-C. Wang, and S. Wongwises, “The new mathematical models for plain fin-and-tube heat exchangers with dehumidifying, ASME,” J. Heat Transfer, vol. 137, no. 3, pp. 11, 2015. DOI: https://doi.org/10.1115/1.4029037.
- W. Pirompugd and S. Wongwises, “Actual dry-bulb temperature and equivalent dry-bulb temperature methods for wavy fin-and-tube heat exchangers with dehumidification,” Int. J. Heat Mass Transfer, vol. 106, pp. 675–685, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.052.
- W. Pirompugd and S. Wongwises, “Efficiencies for partially wetted spine fins: uniform cross section, conical, concave parabolic, and convex parabolic spines, ASME,” J. Heat Transfer, vol. 135, no. 8, pp. 11, 2013. DOI: https://doi.org/10.1115/1.4024017.
- W. Pirompugd and S. Wongwises, “Partially wet fin efficiency for the longitudinal fins of rectangular, triangular, concave parabolic, and convex parabolic profiles,” J. Franklin Inst., vol. 350, no. 6, pp. 1424–1442, 2013. DOI: https://doi.org/10.1016/j.jfranklin.2013.02.019.
- F. C. McQuiston, “Fin efficiency with combined heat and mass transfer,” ASHRAE Trans., Part 1. vol. 81, pp. 350–355, 1975.
- R. L. Webb and N. H. Kim, Principles of Enhanced Heat Transfer, 2nd ed. New York: Taylor & Francis, 2005, pp. 197.
- Y. T. Lin, K. C. Hsu, Y. J. Chang, and C. C. Wang, “Performance of rectangular fin in wet conditions: visualization and wet fin efficiency,” ASME J. Heat Transfer, vol. 123, pp. 836–927, 2001.
- L. Rosario and M. M. Rahman, “Analysis of heat transfer in a partially wet radial fin assembly during dehumidification,” Int. J. Heat Fluid Flow, vol. 20, no. 6, pp. 642–648, 1999. DOI: https://doi.org/10.1016/S0142-727X(99)00057-0.