References
- M. Hirota, M. Kuroki, H. Nakayama, H. Asano and S. Hirayama, “Promotion of turbulent thermal mixing of hot and cold airflows in T-junction,” Flow Turbulence Combust., vol. 81, no. 1-2, pp. 321–336, 2008. DOI: https://doi.org/10.1007/s10494-007-9111-5.
- R. J. A. Howard and E. Serre, “Large-eddy simulation in a mixing tee junction: High-order turbulent statistics analysis,” Int. J. Heat Fluid Flow, vol. 51, pp. 65–77, 2015. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2014.11.009.
- B. Krumbein, V. Termini, S. Jakirlic and C. Tropea, “Flow and heat transfer in cross-stream type T-junctions: A computational study,” Int. J. Heat Fluid Flow, vol. 71, pp. 179–188, 2018. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2018.03.013.
- B. L. Smith, J. H. Mahaffy and K. Angele, “A CFD benchmarking exercise based on flow mixing in a T-junction,” Nucl. Eng. Des., vol. 264, pp. 80–88, 2013. DOI: https://doi.org/10.1016/j.nucengdes.2013.02.030.
- L. Hu and M. Kazimi, “LES benchmark study of high cycle temperature fluctuations caused by thermal striping in a mixing tee,” Int. J. Heat Fluid Flow, vol. 27, no. 1, pp. 54–64, 2006. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2005.08.001.
- J. I. Lee, L.-W. Hu, P. Saha and M. S. Kazimi, “Numerical analysis of thermal striping induced high cycle thermal fatigue in a mixing tee,” Nucl. Eng. Des., vol. 239, no. 5, pp. 833–839, 2009. DOI: https://doi.org/10.1016/j.nucengdes.2008.06.014.
- S. Qian, J. Frith and N. Kasahara, “Classification of flow patterns in angled T-junctions for the evaluation of high-cycle thermal fatigue,” J. Pressure Vessel Technol., vol. 137, pp. 21301, 2015.
- H. Kamide, M. Igarashi, S. Kawashima, N. Kimura and K. Hayashi, “Study on mixing behavior in a tee piping and numerical analyses for evaluation of thermal stripping,” Nucl. Eng. Des., vol. 239, no. 1, pp. 58–67, 2009. DOI: https://doi.org/10.1016/j.nucengdes.2008.09.005.
- V. S. Naik-Nimbalkar, V. S. Patwardhan, A. W. I. Banerjee, I. Padmakumar and G. Vaidyanathan, “Thermal mixing in T-junctions,” Chem. Eng. Sci., vol. 65, no. 22, pp. 5901–5911, 2010. DOI: https://doi.org/10.1016/j.ces.2010.08.017.
- A. Sakowitz, M. Mihaesu and L. Fuchs, “Effects of velocity ratio and inflow pulsations on the flow in a T-junction by large eddy simulation,” Comput. Fluids, vol. 88, pp. 374–385, 2013. DOI: https://doi.org/10.1016/j.compfluid.2013.10.001.
- M. Georgiou and M. V. Papalexandris, “Direct numerical simulation of turbulent heat transfer in a T-junction,” J. Fluid Mech., vol. 845, pp. 581–614, 2018. DOI: https://doi.org/10.1017/jfm.2018.256.
- A. Sakowitz, M. Mihaesu and L. Fuchs, “Turbulent flow mechanisms in mixing T-junctions by large eddy simulations,” Int. J. Heat Fluid Flow, vol. 45, pp. 135–146, 2014. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2013.06.014.
- C. Walker, A. Manera, B. Niceno, M. Simiano and H.-M. Prasser, “Steady-state RANS simulations of the mixing in T-junction,” Nucl. Eng. Des., vol. 240, no. 9, pp. 2107–2115, 2010. DOI: https://doi.org/10.1016/j.nucengdes.2010.05.056.
- J. Westin, et al., “High-cycle thermal fatigue in mixing tee. Large-eddy simulations compared to a new validation experiment,” Proc. 16th Inf. Conf. on Nuclear Engineering (ICONE-16), Orlando, FL, USA, May 11-15, 2008.
- S. Muppidi and K. Mahesh, “Direct numerical simulations of round jets in crossflow,” J. Fluid Mech., vol. 574, pp. 59–84, 2007. DOI: https://doi.org/10.1017/S0022112006004034.
- L. L. Yuan, R. L. Street and J. H. Ferziger, “Large eddy simulations of a round jet in crossflow,” J. Fluid Mech., vol. 379, pp. 71–104, 1999. DOI: https://doi.org/10.1017/S0022112098003346.
- J. Kim and J. J. Jeong, “Large eddy simulation of turbulent flow in a T-junction,” Numer. Heat Transf. Part A, vol. 61, no. 3, pp. 180–200, 2012. DOI: https://doi.org/10.1080/10407782.2012.644167.
- J. Kim, D. Kim and H. Choi, “An immersed-boundary finite volume method for simulations of flow in complex geometries,” J. Comput. Phys., vol. 171, no. 1, pp. 132–150, 2001. DOI: https://doi.org/10.1006/jcph.2001.6778.
- N. Park, S. Lee, J. Lee and H. Choi, “A dynamic subgrid-scale eddy viscosity model with a global model coefficient,” Phys. Fluids, vol. 18, no. 12, pp. 125109, 2006. DOI: https://doi.org/10.1063/1.2401626.
- J. Lee, and H. Choi, and H. “A dynamic global subgrid-scale model for large eddy simulation of scalar transport in complex turbulent flows,” J. Mech. Sci. Technol., vol. 26, no. 12, pp. 3803–3810, 2012. DOI: https://doi.org/10.1007/s12206-012-1004-4.
- J. Lee, H. Choi and N. Park, “Dynamic global model for large eddy simulation of transient flow,” Phys. Fluids, vol. 22, no. 7, pp. 075106, 2010. DOI: https://doi.org/10.1063/1.3459156.
- T. Frank, C. Lifante, H.-M. Prasser and F. Menter, “Simulation of turbulent and thermal mixing in T-junction using URANS and scale-resolving turbulence models in ANSYS CFX,” Nucl. Eng. Des., vol. 240, no. 9, pp. 2313–2328, 2010. DOI: https://doi.org/10.1016/j.nucengdes.2009.11.008.
- A. K. Kuczaj and E. M. J. Komen, “An assessment of large-eddy simulation toward thermal fatigue prediction,” Nucl. Tech., vol. 170, no. 1, pp. 2–15, 2010. DOI: https://doi.org/10.13182/NT10-A9441.
- A. K. Kuczaj, E. M. J. Komen and M. S. Loginov, “Large eddy simulation study of turbulent mixing in a T-junction,” Nucl. Eng. Des., vol. 240, no. 9, pp. 2116–2122, 2010. DOI: https://doi.org/10.1016/j.nucengdes.2009.11.027.
- X. Wu and P. Moin, “A direct numerical simulation study on the mean velocity characteristics in turbulent pipe flow,” J. Fluid Mech., vol. 608, pp. 81–112, 2008. DOI: https://doi.org/10.1017/S0022112008002085.
- T. F. Fric and A. Roshko, “Vortical structure in the wake of a transverse jet,” J. Fluid Mech., vol. 279, pp. 1–47, 1994. DOI: https://doi.org/10.1017/S0022112094003800.
- T. Ming and J. Zhao, “Large-eddy simulation of thermal fatigue in a mixing tee,” Int. J. Heat Fluid Flow, vol. 37, pp. 93–108, 2012. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2012.06.002.