References
- D. G. Bogard and K. A. Thole, “Gas turbine film cooling,” J. Propul. Power, vol. 22, no. 2, pp. 249–270, 2006. DOI: https://doi.org/10.2514/1.18034.
- K. D. Lee and K. Y. Kim, “Film cooling performance of cylindrical holes embedded in a transverse trench,” Numer. Heat Transf. A Appl., vol. 65, no. 2, pp. 127–143, 2014. DOI: https://doi.org/10.1080/10407782.2013.826106.
- R. Zhu, T. W. Simon, and G. N. Xie, “Influence on film cooling effectiveness of novel holes based on cylindrical configurations,” Numer. Heat Transf. A Appl., vol. 75, no. 7, pp. 469–488, 2019. DOI: https://doi.org/10.1080/10407782.2019.1606629.
- J. Wang, K. Tian, J. Luo, and B. Sudén, “Effect of hole configuration on film cooling performance,” Numer. Heat Transf. A Appl., vol. 75, no. 11, pp. 725–738, 2019. DOI: https://doi.org/10.1080/10407782.2019.1608762.
- S. Tamang, et al., “Numerical investigation of adiabatic film cooling effectiveness through compound angle variations,” Numer. Heat Transf. A Appl., vol. 78, no. 10, pp. 595–618, 2020. DOI: https://doi.org/10.1080/10407782.2020.1803600.
- J. L. Fu, Y. Cao, C. Zhang, and J. Q. Zhu, “Investigation of the conjugate heat transfer and flow field for a flat plate with combined film and impingement cooling,” J. Therm. Sci., vol. 29, no. 4, pp. 955–971, 2020. DOI: https://doi.org/10.1007/s11630-020-1233-2.
- M. Gritsch, A. Schulz, and S. Wittig, “Adiabatic wall effectiveness measurements of film cooling holes with expanded exits,” J. Turbomach., vol. 120, no. 3, pp. 549–556, 1998. DOI: https://doi.org/10.1115/1.2841752.
- M. Gritsch, A. Schulz, and S. Wittig, “Effect of crossflows on the discharge coefficient of film cooling holes with varying angles of inclination and orientation,” J. Turbomach., vol. 123, no. 4, pp. 781–787, 2001. DOI: https://doi.org/10.1115/1.1397306.
- J. W. Mcclintic, J. B. Anderson, D. G. Bogard, T. E. Dyson, and Z. D. Webster, “Effect of internal crossflow velocity on film cooling effectiveness-part I: Axial shaped holes,” J. Turbomach., vol. 140, no. 1, pp. 011003, 2018. DOI: https://doi.org/10.1115/1.4037997.
- J. W. Mcclintic, J. B. Anderson, D. G. Bogard, T. E. Dyson, and Z. D. Webster, “Effect of internal crossflow velocity on film cooling effectiveness – part II: Compound angle shaped holes,” J. Turbomach., vol. 140, no. 1, pp. 011004, 2018. DOI: https://doi.org/10.1115/1.4037998.
- C. Saumweber, A. Schulz, S. Wittig, and M. Gritsch, “Effects of entrance crossflow directions to film cooling holes,” Ann. N Y Acad. Sci., vol. 934, no. 1, pp. 401–408, 2001. DOI: https://doi.org/10.1111/j.1749-6632.2001.tb05876.x.
- S. Acharya and D. H. Leedom, “Large eddy simulations of discrete hole film cooling with plenum inflow orientation effects,” J. Heat Transf., vol. 135, no. 1, pp. 011010, 2013. DOI: https://doi.org/10.1115/1.4007667.
- K. C. Stimpson, C. J. Snyder, K. A. Thole, and D. Mongillo, “Effects of coolant feed direction on additively manufactured film cooling holes,” J. Turbomach., vol. 140, no. 11, pp. 111001, 2018. DOI: https://doi.org/10.1115/1.4041374.
- J. W. Mcclintic, et al., “The effect of internal crossflow on the adiabatic effectiveness of compound angle film cooling holes,” J. Turbomach., vol. 137, no. 7, pp. 071006, 2015. DOI: https://doi.org/10.1115/1.4029157.
- T. F. Fric and R. P. Campbell, “Method for improving the cooling effectiveness of a gaseous coolant stream which flows through a substrate, and related articles of manufacture,” US6383602 B1, 2002.
- J. R. Dorrington, D. G. Bogard, and R. S. Bunker, “Film effectiveness performance for coolant holes imbedded in various shallow trench and crater depressions,” Proc. ASME Turbo Expo., vol. 2007, pp. 749–758, 2007.
- Y. Lu, A. Dhungel, S. V. Ekkad, and R. S. Bunker, “Film cooling measurements for cratered cylindrical inclined holes,” J. Turbomach., vol. 131, no. 1, pp. 011005, 2007. DOI: https://doi.org/10.1115/1.2950055.
- Z. W. Zhang, W. J. Qian, and J. M. Hu, “A numerical research on diverse cratered film cooling hole geometries,” KEM, vol. 693, pp. 491–497, 2016. DOI: https://doi.org/10.4028/www.scientific.net/KEM.693.491.
- A. A. Khalatov, N. A. Panchenko, and S. D. Severin, “Application of cylindrical, triangular and hemispherical dimples in the film cooling technology,” J. Phys. Conf. Ser., vol. 891, pp. 012145, 2017. DOI: https://doi.org/10.1088/1742-6596/891/1/012145.
- A. A. Khalatov, S.-J. E, D. W, and I. Borisov, “Film cooling evaluation of a single array of triangular craters,” Int. J. Heat Mass Transf., vol. 159, pp. 120055, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.120055.
- B. T. An, J. J. Liu, X. D. Zhang, S. J. Zhou, and C. Zhang, “Film cooling effectiveness measurements of a near surface streamwise diffusion hole,” Int. J. Heat Mass Transf., vol. 103, pp. 1–13, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.07.028.
- P. Kalghatgi and S. Acharya, “Improved film cooling effectiveness with a round film cooling hole embedded in a contoured crater,” J. Turbomach, vol. 137, no. 10, pp. 101006, 2015. DOI: https://doi.org/10.1115/1.4030395.
- L. C. Bai and C. Zhang, “Flow mechanism of cooling effectiveness improvement for the cylindrical film cooling hole with contoured craters,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 473, pp. 012033, 2019. DOI: https://doi.org/10.1088/1757-899X/473/1/012033.
- J. L. Fu, L. C. Bai, C. Zhang, and P. F. Ju, “Film cooling performance for cylindrical holes embedded in contoured craters: Effect of the crater depth,” J. Appl. Mech. Tech. Phys., vol. 60, no. 6, pp. 1068–1076, 2019. DOI: https://doi.org/10.1134/S0021894419060129.
- L. C. Bai, “Research on optimization design and thermal coupling analysis of the cratered hole,” 2021. Ma. Eng. Thesis, Tianjin University of Technology, Tianjin.