References
- T. Defraeye, B. Blockenb, and J. Carmeliet, “Analysis of convective heat and mass transfer coefficients for convective drying of a porous flat plate by conjugate modelling,” Int. J. Heat Mass Transfer, vol. 55, pp. 112–124, 2012.
- T.-M. Shih, Y. Zheng, M. Arie, and J.-C. Zheng, “Literature survey of numerical heat transfer,” Numer. Heat Transfer, Part A: Appl., vol. 64, no. 6, pp. 435–525, 2013. DOI: https://doi.org/10.1080/10407782.2013.784652.
- K. Abahri, R. Bennacer, and R. Belarbi, “Sensitivity analyses of convective and diffusive driving potentials on combined heat air and mass transfer in hygroscopic materials,” Numer. Heat Transfer, Part A: Appl., vol. 69, no. 10, pp. 1079–1091, 2016. DOI: https://doi.org/10.1080/10407782.2015.1109389.
- P. Kumar and K. M. Pandey, “Effect of wave shift of porous slab on thermo-hydraulic transport characteristics of laminar flow through a wavy channel”, Materials Today: Proceedings, DOI: https://doi.org/10.1016/j.matpr.2021.07.349.
- P. Kumar and K. M. Pandey, “A review on latest development in heat transfer through porous media in combination with nanofluids and wavy walls,” Mater. Today: Proc., vol. 45, pp. 7171–7175, 2021. DOI: https://doi.org/10.1016/j.matpr.2021.02.411.
- A.-R. A. Khaled and K. Vafai, “The role of porous media in modeling flow and heat transfer in biological tissues,” Int. J. Heat Mass Transfer, vol. 46, no. 26, pp. 4989–5003, 2003. DOI: https://doi.org/10.1016/S0017-9310(03)00301-6.
- K. Milani Shirvan, R. Ellahi, S. Mirzakhanlari, and M. Mamourian, “Enhancement of heat transfer and heat exchanger effectiveness in a double pipe heat exchanger filled with porous media: Numerical simulation and sensitivity analysis of turbulent fluid flow,” Appl. Therm. Eng., vol. 109, pp. 761–774, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.08.116.
- M. I. A. Othman and M. Marin, “Effect of thermal loading due to laser pulse on thermoelastic porous medium under G–N theory,” Results Phys., vol. 7, pp. 3863–3872, 2017. DOI: https://doi.org/10.1016/j.rinp.2017.10.012.
- M. Hassan, M. Marin, A. Alsharif, and R. Ellahi, “Convective heat transfer flow of nanofluid in a porous medium over wavy surface,” Phys. Lett. A., vol. 1, pp. 1–5, 2018.
- M. K. Alkam and M. A. Al-Nimr, “Improving the performance of double-pipe heat exchangers by using porous substrates,” Int. J. Heat Mass Transfer, vol. 42, no. 19, pp. 3609–3618, 1999. DOI: https://doi.org/10.1016/S0017-9310(99)00033-2.
- Z. F. Huang, A. Nakayama, K. Yang, C. Yang, and W. Liu, “Enhancing heat transfer in the core flow by using porous medium insert in a tube,” Int. J. Heat Mass Transfer, vol. 53, no. 5–6, pp. 1164–1174, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2009.10.038.
- H. R. Ashorynejad and A. Zarghami, “Magnetohydrodynamics flow and heat transfer of Cu-water nanofluid through a partially porous wavy channel,” Int. J. Heat Mass Transfer, vol. 119, pp. 247–258, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.117.
- M. Akbarzadeh and M. J. Maghrebi, “Combined effects of corrugated walls and porous inserts on performance improvement in a heat exchanger channel,” Int. J. Therm. Sci., vol. 127, pp. 266–276, 2018. DOI: https://doi.org/10.1016/j.ijthermalsci.2018.01.010.
- M. Maerefat, S. Y. Mahmoudi, and K. Mazaheri, “Numerical simulation of forced convection enhancement in a pipe by porous inserts,” Heat Transfer Eng., vol. 32, no. 1, pp. 45–56, 2011. DOI: https://doi.org/10.1080/01457631003732854.
- T. Ozgumus and M. Mobedi, “Effect of pore to throat size ratio on interfacial heat transfer coefficient of porous media,” J. Heat Transfer, vol. 137, pp. 012602, 2014.
- F.-C. Lin, B.-H. Liu, C.-C. Juan, and Y.-M. Chen, “Effect of pore size distribution in bidisperse wick on heat transfer in a loop heat pipe,” Heat Mass Transfer, vol. 47, no. 8, pp. 933–940, 2011. DOI: https://doi.org/10.1007/s00231-011-0841-5.
- M. A. Sheremet, T. Grosan, and I. Pop, “Free convection in a square cavity filled with a porous medium saturated by nanofluid using Tiwari and das’ nanofluid model,” Transp. Porous Med., vol. 106, no. 3, pp. 595–610, 2015. DOI: https://doi.org/10.1007/s11242-014-0415-3.
- M. Ghalambaz, I. Sabour, and M. Pop, “Free convection in a square cavity filled by a porous medium saturated by a nanofluid: Viscous dissipation and radiation effect,” Eng. Sci. Technol. Int. Jorum, vol. 19, no. 3, pp. 1244–1253, 2016. DOI: https://doi.org/10.1016/j.jestch.2016.02.006.
- A. M. Rashad, M. M. Rashidi, G. Lorenzini, S. E. Ahmed, and A. M. Aly, “Magnetic field and internal heat generation effects on the free convection in a rectangular cavity filled with a porous medium saturated with Cu–water nanofluid,” Int. J. Heat Mass Transfer, vol. 104, pp. 878–889, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.08.025.
- A. K. Hussein, H. K. Hamzah, F. H. Ali, and L. Kolsi, “Mixed convection in a trapezoidal enclosure filled with two layers of nanofluid and porous media with a rotating circular cylinder and a sinusoidal bottom wall,” J. Therm. Anal. Calorim., vol. 141, no. 5, pp. 2061–2079, 2020. DOI: https://doi.org/10.1007/s10973-019-08963-6.
- K. Khanafer, “Comparison of flow and heat transfer characteristics in a lid-driven cavity between flexible and modified geometry of a heated bottom wall,” Int. J. Heat Mass Transfer, vol. 78, pp. 1032–1041, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.07.065.
- S. Pati, S. K. Mehta, and A. Borah, “Numerical investigation of thermo-hydraulic transport characteristics in wavy channels: Comparison between raccoon and serpentine channels,” Int. Commun. Heat Mass Transfer, vol. 88, pp. 171–176, 2017. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2017.09.001.
- M. Akbarzadeh, S. Rashidi, N. Karimi, and N. Omar, “First and second laws of thermodynamics analysis of nanofluid flow inside a heat exchanger duct with wavy walls and a porous insert,” J. Therm. Anal. Calorim., vol. 135, no. 1, pp. 177–194, 2019. DOI: https://doi.org/10.1007/s10973-018-7044-y.
- S. Bhardwaj, A. Dalal, and S. Pati, “Influence of wavy wall and non-uniform heating on natural convection heat transfer and entropy generation inside porous complex enclosure,” Energy, vol. 79, pp. 467–481, 2015. DOI: https://doi.org/10.1016/j.energy.2014.11.036.
- H. T. Cheong, S. Sivasankaran, and M. Bhuvaneswari, “Effect of aspect ratio on natural convection in a porous wavy cavity,” Arab. J. Sci. Eng., vol. 43, no. 3, pp. 1409–1421, 2018. DOI: https://doi.org/10.1007/s13369-017-2948-6.
- A. M. Aly, Z. A. Raizah, and S. E. Ahmed, “Mixed convection in a cavity saturated with wavy layer porous medium: Entropy generation,” J. Thermophys. Heat Transfer, vol. 32, pp. 1–17, 2018.
- T. A. Rush, T. A. Newell, and A. Jacobi, “An experiment study of flow and heat transfer in sinusoidal wavy passages,” Int. J. Heat Mass Transfer, vol. 42, no. 9, pp. 1541–1553, 1999. DOI: https://doi.org/10.1016/S0017-9310(98)00264-6.
- C. Wang and C. Chen, “Forced convection in a wavy-wall channel,” Int. J. Heat Mass Transfer, vol. 45, no. 12, pp. 2587–2595, 2002. DOI: https://doi.org/10.1016/S0017-9310(01)00335-0.
- H. R. Ashorynejad and A. Shahriari, “MHD natural convection of hybrid nanofluid in an open wavy cavity,” Results Phys., vol. 9, pp. 440–455, 2018. DOI: https://doi.org/10.1016/j.rinp.2018.02.045.
- S. Morsli, A. Sabeur, and M. El Ganaoui, “Influence of aspect ratio on the natural convection and entropy generation in rectangular cavities with wavy-wall,” Energy Procedia, vol. 139, pp. 29–36, 2017. DOI: https://doi.org/10.1016/j.egypro.2017.11.168.
- M. A. Sheremet, I. Pop, and A. Ishak, “Time-dependent natural convection of micropolar fluid in a wavy triangular cavity,” Int. J. Heat Mass Transfer, vol. 105, pp. 610–622, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.09.044.
- S. K. Mehta, A. Kumar, and S. Pati, “Numerical analysis of thermo-hydraulic transport characteristics in wavy channel with porous wavy slab,” In Proceedings of 7th International 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, Mumbai, December 10–12, 2018, pp. 3.
- V. M. Job and S. R. Gunakala, “Unsteady MHD free convection nanofluid flows within a wavy trapezoidal enclosure with viscous and joule dissipation effects,” Numer. Heat Transfer Part A Appl., vol. 69, no. 4, pp. 421–443, 2016. DOI: https://doi.org/10.1080/10407782.2015.1080946.
- M. Leonard, A. K. Mozumder, S. Mahmud, and P. K. Das, “Natural convection of Al2 O3-water nanofluid in a wavy enclosure,” AIP Conf. Proc., vol. 1851, p. 020003, 2017.
- E. S. Reddy and S. Panda, “MHD natural convection nanofluid flows in a wavy trapezoidal porous enclosure with differentially heated side walls,” J. Natn. Sci. Found. Sri Lanka, vol. 48, no. 1, pp. 57–68, 2020. DOI: https://doi.org/10.4038/jnsfsr.v48i1.9934.
- S. E. Ahmed and Z. Z. Rashed, “MHD natural convection in a heat generating porous medium-filled wavy enclosures using Buongiorno’s nano fluid model,” Case Stud. Therm. Eng., vol. 14, pp. 100430, 2019. DOI: https://doi.org/10.1016/j.csite.2019.100430.
- M. A. Sheremet, D. S. Cimpean, and I. Pop, “Free convection in a partially heated wavy porous cavity filled with a nanofluid under the effects of Brownian diffusion and thermophoresis,” Appl. Therm. Eng., vol. 113, pp. 413–418, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2016.11.033.
- Y. T. Lin and C. C. Cho, “Analysis of energy flux vector on natural convection heat transfer in porous wavy-wall square cavity with partially-heated surface,” Energies, vol. 12, no. 23, pp. 4456, 2019. DOI: https://doi.org/10.3390/en12234456.
- N. Dukhan, O. Bagci, and M. Ozdemir, “Thermal development in open-cell metal foam: An experiment with constant wall heat flux,” Int. J. Heat Mass Transfer, vol. 85, pp. 852–859, 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.047.
- K. Anirudh and S. Dhinakaran, “Effects of Prandtl number on the forced convection heat transfer from a porous square cylinder,” Int. J. Heat Mass Transfer, vol. 126, pp. 1358–1375, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.06.003.