References
- F. Ning, W. Cong, J. Qiu, J. Wei and S. Wang, “Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling,” Compos. Part B Eng, vol. 80, pp. 369–378, Oct. 2015. DOI: https://doi.org/10.1016/j.compositesb.2015.06.013.
- O. A. Mohamed, S. H. Masood and J. L. Bhowmik, “Experimental investigation of time-dependent mechanical properties of PC-ABS prototypes processed by FDM additive manufacturing process,” Mater. Lett, vol. 193, pp. 58–62, Apr. 2017. DOI: https://doi.org/10.1016/j.matlet.2017.01.104.
- J. C. S. McCaw and E. Cuan-Urquizo, “Curved-layered additive manufacturing of non-planar, parametric lattice structures,” Mater. Des, vol. 160, pp. 949–963, Dec. 2018. DOI: https://doi.org/10.1016/j.matdes.2018.10.024.
- A. Iftikhar, et al., “Turbine blade manufacturing through rapid tooling (RT) process and its quality inspection,” Mater. Manuf. Proc., vol. 28, no. 5, pp. 534–538, Jun. 2013. DOI: https://doi.org/10.1080/10426914.2012.746698.
- D. Yagnik, “Fused deposition modeling – A rapid prototyping technique for product cycle time reduction cost effectively in Aerospace applications,” IOSR J. Mech. Civil Eng., vol. 5, pp. 62–68, March 2014. https://www.iosrjournals.org/iosr-jmce/papers/ICAET-2014/me/volume-1/14.pdf
- T. D. Ngo, A. Kashani, G. Imbalzano, K. T. Q. Nguyen and D. Hui, “Additive manufacturing (3D printing): a review of materials, methods, applications and challenges,” Compos. Part B Eng., vol. 143, pp. 172–196, Jun. 2018. DOI: https://doi.org/10.1016/j.compositesb.2018.02.012.
- R. Jerez-Mesa, G. Gomez-Gras, J. A. Travieso-Rodriguez and V. Garcia-Plan, “A comparative study of the thermal behavior of three different 3D printer liquefiers,” Mechatronics, vol. 56, pp. 297–305, Dec. 2018. DOI: https://doi.org/10.1016/j.mechatronics.2017.06.008.
- S. Singh, S. Ramakrishna and R. Singh, “Material issues in additive manufacturing: a review,” J. Manufact. Proc., vol. 25, pp. 185–200, Jan. 2017. DOI: https://doi.org/10.1016/j.jmapro.2016.11.006.
- L. Villalpando, H. Eiliat and R. J. Urbanic, “An optimization approach for components built by fused deposition modeling with parametric internal structures, product services systems and value creation,” Proc. 6th CIRP Conf. Ind. Product-Service Systems, Procedia CIRP, vol. 17, pp. 800–805, 2014. DOI: https://doi.org/10.1016/j.procir.2014.02.050.
- L. B. Ji and T. R. Zhou, “Finite element simulation of temperature field in fused deposition modeling,” AMR, vol. 97–101, pp. 2585–2588, 2010. DOI: https://doi.org/10.4028/www.scientific.net/AMR.97-101.2585.
- Y. Zhang and V. Shapiro, “Linear-time thermal simulation of as-manufactured fused deposition modeling components,” J. Manufact. Sci. Eng., vol. 140, no. 7, pp. 71002, July 2018. DOI: https://doi.org/10.1115/1.4039556
- Y. Zhang and K. Chou, “Three-dimensional finite element analysis simulations of the fused deposition modelling process,” P. I. Mech. Eng. B-J. Eng., vol. 220, no. 10, pp. 1663–1671, Oct. 2006. DOI: https://doi.org/10.1243/09544054JEM572.
- Y. Zhang and K. Chou, “A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis, P,” I. Mech. Eng. B-J. Eng., vol. 222, no. 8, pp. 959–968, Sep. 2008. DOI: https://doi.org/10.1243/09544054JEM990.
- C. Li, Y. Wang, H. Zhan, T. Han, B. Han and W. Zhao, “Three-dimensional finite element analysis of temperatures and stresses in wide-band laser surface melting processing,” Mat. Des., vol. 31, no. 7, pp. 3366–3373, Aug. 2010. DOI: https://doi.org/10.1016/j.matdes.2010.01.054.
- Y. Zhou, H. Lu, G. Wang, J. Wang and W. Li, “Voxelization modelling based finite element simulation and process parameter optimization for fused filament fabrication,” Mater. Design, vol. 187, pp. 108409, Feb. 2020. DOI: https://doi.org/10.1016/j.matdes.2019.108409.
- B. N. Turner, R. A. Strong and S. Gold, “A review of melt extrusion additive manufacturing processes: I. Process design and modeling,” Rapid Prototyp. J., vol. 20, no. 3, pp. 192–204, April 2014. DOI: https://doi.org/10.1108/RPJ-01-2013-0012.
- O. A. Mohamed, S. H. Masood and J. L. Bhowmik, “Optimization of fused deposition modeling process parameters: A review of current research and future prospects,” Adv. Manufact., vol. 3, no. 1, pp. 42–53, Feb. 2015. DOI: https://doi.org/10.1007/s40436-014-0097-7.
- Y. Zhou, G. Xiong, T. Nyberg and D. Liu, “Temperature analysis in the fused deposition modeling process,” 2016 3rd Int. Conf. Inform. Sci. Control Eng. (ICISCE), Beijing, China, 2016, pp. 678–682 DOI: https://doi.org/10.1109/ICISCE.2016.150.
- J. F. Rodriguez, J. P. Thomas and J. E. Renaud, “Characterization of the mesostructure of fused-deposition acrylonitrile-butadienestyrene materials,” Rapid Prototyp. J., vol. 6, no. 3, pp. 175–185, Sep. 2000. . DOI: https://doi.org/10.1108/13552540010337056.
- J. F. Rodrıguez, J. P. Thomas and J. E. Renaud, “Maximizing the strength of fused deposition ABS plastic parts,” Proc. 10th Solid Freeform Fabric. Symp., Austin, TX, 1999., pp. 335–342.
- S. F. Costa, F. M. Duarte and J. A. Covas, “Modelling of the thermal behaviour of free form extrusion,” MSF, vol. 636–637, pp. 833–839, Jan. 2010. DOI: https://doi.org/10.4028/www.scientific.net/MSF.636-637.833.
- S. Costa, F. Duarte and J. A. Covas, Using MATLAB to Compute Heat Transfer in Free Form Extrusion MATLAB, A Ubiquitous Tool for the Practical Engineer, Clara Ionescu, Ed. London: Intech Open, Nov. 2011.
- S. F. Costa, F. M. Duarte and J. A. Covas, “Estimation of filament temperature and adhesion development infused deposition techniques,” J. Mater. Proc. Technol., vol. 245, pp. 167–179, Feb. 2017. DOI: https://doi.org/10.1016/j.jmatprotec.2017.02.026.
- N. Rosenzweig and M. Narkis, “Sintering rheology of amorphous polymers,” Polym. Eng. Sci., vol. 21, no. 17, pp. 1167–1170, Dec. 1981. DOI: https://doi.org/10.1002/pen.760211709.
- X. Zhou, S. J. Hsieh and Y. Sun, “Experimental and numerical investigation of the thermal behaviour of polylactic acid during the fused deposition process,” Virtual Phys. Prototyp., vol. 12, no. 3, pp. 221–233, April 2017. DOI: https://doi.org/10.1080/17452759.2017.1317214.
- C. Bellehumeur, L. Li, Q. Sun and P. Gu, “Modeling of bond formation between polymer filaments in the fused deposition modeling process,” J. Manufact. Proc., vol. 6, no. 2, pp. 170–178, Sep. 2004. DOI: https://doi.org/10.1016/S1526-6125(04)70071-7.
- Q. Sun, G. M. Rizvi, C. T. Bellehumeur and P. Gu, “Effect of processing conditions on the bonding quality of FDM,” Rapid. Prototyp. J., vol. 14, no. 2, pp. 72–80, March 2008. DOI: https://doi.org/10.1108/13552540810862028.
- M. A. Yardimci and S. Güçeri, “Conceptual framework for the thermal process modelling of fused deposition,” Rapid Prototyp. J., vol. 2, no. 2, pp. 26–31, June 1996. DOI: https://doi.org/10.1108/13552549610128206.
- J. M. Dowden, The Mathematics of Thermal Modeling, an Introduction to the Theory of Laser Material Processing. Boca Raton, FL: Chapman & Hall/CRC, 2001.
- M. Spoerk, C. Holzer and J. Gonzalez-Gutierrez, “Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage,” J. Appl. Polym. Sci., vol. 137, no. 12, pp. 48545, Mar. 2020. DOI: https://doi.org/10.1002/app.48545.
- K. K. Tamma and R. R. Namburu, “Recent advances, trends and new perspectives via enthalpy-basesd finite element formulations for applications to solidification problems,” Int. J. Numer. Meth. Engng, vol. 30, no. 4, pp. 803–820, Sep. 1990. DOI: https://doi.org/10.1002/nme.1620300415.
- X. Zhou and S.-J. Hsieh, Thermal Analysis of Fused Deposition Modeling Process Using Infrared Thermography Imaging and Finite Element Modeling, Thermosense: Thermal Infrared Applications XXXIX, Proc. of SPIE Vol. 10214, pp. 1021409, Anaheim, California, May 2017.
- J. Thomas and J. Rodríguez, “Modeling the fracture strength between fused deposition extruded roads,” Proc. Proc. 11th Solid Freeform Fabrication Symposium, Austin, Texas, Aug. 7–9, 2000, pp. 16–23.
- ANSYS Advanced Analysis Guide, Release 2021 R1, ANSYS Inc., Canonsburg, Pennsylavania, 2021.
- A. Lepoivre, N. Boyard, A. Levy and V. Sobotka, “Heat transfer and adhesion study for the FFF additive manufacturing process,” Proc. Manufact., vol. 47, pp. 948–955, Jul. 2020. DOI: https://doi.org/10.1016/j.promfg.2020.04.291.
- Y. Yan, R. Zhang, G. Hong and X. Yuan, “Research on the bonding of material paths in melted extrusion modeling,” Mater. Design, vol. 21, no. 2, pp. 93–99, April 2000. DOI: https://doi.org/10.1016/S0261-3069(99)00058-8.
- A. M. Yardimci, S. I. Guceri and S. C. Danforth, “A phenomenological numerical model for fused deposition processing of particle filled parts,” Proc. Int. Solid Freeform Fabr. Symp. Austin, TX, USA: The Univ. Texas, Jan. 1995, pp. 189–195.
- S. Bhandari and R. A. Lopez-Anido, Discrete-Event Simulation Thermal Model for Extrusion-Based Additive Manufacturing of PLA and ABS, “Discrete-event simulation thermal model for extrusion-based additive manufacturing of PLA and ABS,” Materials, vol. 13, no. 21, pp. 4985, Oct. 2020. DOI: https://doi.org/10.3390/ma13214985.
- H. R. Vanaei, et al., “Experimental study of PLA thermal behavior during fused filament fabrication,” J Appl Polym Sci, vol. 138, no. 4, pp. e49747, Jun. 2021. DOI: https://doi.org/10.1002/app.49747.
- P. Zhang, Z. Wang, J. Li, X. Li and L. Cheng, “From materials to devices using fused deposition modeling: a state-of-art review,” Nanotechnol. Rev., vol. 9, no. 1, pp. 1594–1609, Dec. 2020. DOI: https://doi.org/10.1515/ntrev-2020-0101.