References
- B. Ning, et al., “An introduction to parallel control and management for high-speed railway systems,” IEEE Trans. Intell. Transport. Syst., vol. 12, no. 4, pp. 1473–1483, Dec. 2011. DOI: https://doi.org/10.1109/TITS.2011.2159789.
- F. Yang, P. Wang, K. Wei, and F. Wang, “Investigation on nonlinear and fractional derivative Zener model of coupled vehicle-track system,” Veh. Syst. Dyn., vol. 58, no. 6, pp. 864–26, Mar. 2020. DOI: https://doi.org/10.1080/00423114.2019.1602273.
- W. Zhai, K. Wang, and C. Cai, “Fundamentals of vehicle-track coupled dynamics,” Veh. Syst. Dyn., vol. 47, no. 11, pp. 1349–1376, 2009. DOI: https://doi.org/10.1080/00423110802621561.
- F. Yang, et al., “Efficient piezoelectric harvester for random broadband vibration of rail,” Energy, vol. 218, pp. 119559, 2021. DOI: https://doi.org/10.1016/j.energy.2020.119559.
- F. Yang, M. Gao, J. Cong, and P. Wang, “System dynamics modeling and experimental study of railway track with thermoelectric heater/generator in extreme weather conditions,” J. Clean. Prod., vol. 249, pp. 119367, 2020. DOI: https://doi.org/10.1016/j.jclepro.2019.119367.
- S. Wu, S. Zhang, and Z. Xu, “Thermal crack growth-based fatigue life prediction due to braking for a high-speed railway brake disc,” Int. J. Fatigue, vol. 87, pp. 359–369, Jun. 2016. DOI: https://doi.org/10.1016/j.ijfatigue.2016.02.024.
- G. Zhuang, et al., “Study on temperature rise of friction surface in disc braking,” J. Mech. Eng., vol. 39, no. 2, pp. 150–154, 2003. DOI: https://doi.org/10.1007/s11769-003-0044-1.
- Q. Wang, H. Cui, Z. Lian, and L. Li, “Thermoelastic analysis of friction pairs in hydro-viscous drive combined thermal and mechanical loads under soft startup condition,” Numer. Heat Transf. A: Appl., vol. 75, no. 5, pp. 327–341, 2019. DOI: https://doi.org/10.1080/10407782.2019.1591862.
- A. A. Yevtushenko, M. Kuciej, and E. Och, “Some methods for calculating temperature during the friction of thermosensitive materials,” Numer. Heat Transf. A: Appl., vol. 67, no. 6, pp. 696–718, 2015. DOI: https://doi.org/10.1080/10407782.2014.949125.
- A. Yevtushenko and E. Ivanyk, “Determination of temperatures for sliding contact with applications for braking systems,” Wear, vol. 206, no. 1–2, pp. 53–59, 1997. DOI: https://doi.org/10.1016/S0043-1648(96)07318-8.
- Z. Yang, “Thermo-mechanical coupling simulation of braking process of brake disc,” J. Mech. Eng., vol. 46, no. 02, pp. 88–92, 2010. DOI: https://doi.org/10.3901/JME.2010.02.088.
- A. Adamowicz, “Effect of convective cooling on temperature and thermal stresses in disk during repeated intermittent braking,” J. Frict. Wear, vol. 37, no. 2, pp. 107–112, 2016. DOI: https://doi.org/10.3103/S1068366616020021.
- P. Zagrodzki, “Analysis of thermo mechanical phenomena in multidisc clutches and brakes,” Wear, vol. 140, no. 2, pp. 291–308, 1990. DOI: https://doi.org/10.1016/0043-1648(90)90091-N.
- P. Ji, F. Wu, G. Zhang, X. Yin and D. Vainchtein, “A novel numerical approach for investigation of the heat transport in a full 3D brake system of high-speed trains,” Numer. Heat Transf. A: Appl., vol. 75, no. 12, pp. 824–840, 2019. DOI: https://doi.org/10.1080/10407782.2019.1608767.
- A. Suresh Babu and N. Siva Prasad, “Coupled field finite element analysis of railway block brakes,” Proc. Inst. Mech. Eng. F J. Rail Rapid Transit., vol. 223, pp. 345–352, 2009. DOI: https://doi.org/10.1243/09544097JRRT256.
- A. Yevtushenko and P. Grzes, “The FEM-modeling of the frictional heating phenomenon in the pad/disc tribosystem,” Numer. Heat Transf. A: Appl., vol. 58, no. 3, pp. 207–226, 2010. DOI: https://doi.org/10.1080/10407782.2010.497312.
- M. Shahzamanian, B. Sahari, M. Bayat, Z. N. Ismarrubie, and F. Mustapha, “Transient and thermal contact analysis for the elastic behavior of functionally graded brake disks due to mechanical and thermal loads,” Mater. Des., vol. 31, no. 10, pp. 4655–4665, 2010. DOI: https://doi.org/10.1016/j.matdes.2010.05.032.
- W. Chung, S. Jung, and T. Park, “Numerical analysis method to estimate thermal deformation of a ventilated disc for automotives,” J. Mech. Sci. Technol., vol. 24, no. 11, pp. 2189–2195, 2010. DOI: https://doi.org/10.1007/s12206-010-0905-3.
- M. Han, C. Lee, T. Park, J. Park, and S. Son, “Coupled thermo-mechanical analysis and shape optimization for reducing uneven wear of brake pads,” Int. J. Automot. Technol., vol. 18, no. 6, pp. 1027–1035, 2017. DOI: https://doi.org/10.1007/s12239-017-0100-y.
- Y. Wu, H. Jin, Y. Li, Z. Ji, and S. Hou, “Simulation of temperature distribution in disk brake considering a real brake pad wear,” Tribol. Lett., vol. 56, no. 2, pp. 205–213, 2014. DOI: https://doi.org/10.1007/s11249-014-0400-6.
- A. Belhocine, A. Bakar, and M. Bouchetara, “Thermal and structural analysis of disc brake assembly during single stop braking event,” Aust. J. Mech. Eng., vol. 14, no. 1, pp. 26–38, 2016. DOI: https://doi.org/10.1080/14484846.2015.1093213.
- A. Belhocine and W. Omar, “CFD analysis of the brake disc and the wheel house through air flow: Predictions of Surface heat transfer coefficients (STHC) during braking operation,” J. Mech. Sci. Technol., vol. 32, no. 1, pp. 481–490, 2018. DOI: https://doi.org/10.1007/s12206-017-1249-z.
- S. Jung, T. Park, J. Chai, and W. Chung, “Thermal-mechanical finite element analysis of hot judder phenomenon of a ventilated disc brake system,” Int. J. Precis. Eng. Manuf., vol. 12, no. 5, pp. 821–828, 2011. DOI: https://doi.org/10.1007/s12541-011-0109-5.
- M. Duzgun, “Investigation of thermal-structural behaviors of different ventilation application on brake discs,” J. Mech. Sci. Technol., vol. 26, no. 1, pp. 235–240, 2012. DOI: https://doi.org/10.1007/s12206-011-0921-y.
- Y. Tabbai, et al., “Friction and wear performance of disc brake pads and pyroelectric energy harvesting,” Int. J. Precis. Eng. Manuf. Green Technol., vol. 8, no. 2, pp. 487–500, 2021. DOI: https://doi.org/10.1007/s40684-020-00195-6.
- M. Nankyo, T. Ishihara, and H. Inooka, “Feedback control of braking deceleration on railway vehicle,” J. Dyn. Syst. Meas. Control, vol. 128, no. 2, pp. 244–250, 2006. DOI: https://doi.org/10.1115/1.2192825.
- M. Nankyo, et al., “Development of a braking system equipment with deceleration feedback control,” RTRI Rep., vol. 23, no. 4, pp. 11–46, 2009.
- M. Wu and Z. Luo, “Study on train braking deceleration feedback control based on adaptive parameter estimation,” J. China Railw. Soc., vol. 37, no. 8, pp. 8–16, 2015. DOI: https://doi.org/10.3969/j.issn.1001-8360.2015.08.002.
- Z. Luo and J. Zuo, “Conjugate heat transfer study on a ventilated disc of high-speed trains during braking,” J. Mech. Sci. Technol., vol. 28, no. 5, pp. 1887–1897, 2014. DOI: https://doi.org/10.1007/s12206-014-0336-7.
- J. Chen and G. Fei, “Temperature field and thermal stress analyses of high-speed train brake disc under pad variations,” Open Mech. Eng. J., vol. 9, no. 1, pp. 371–378, 2015. DOI: https://doi.org/10.2174/1874155X01509010371.
- J. Archard, “Contact and Rubbing of Flat Surfaces,” J. Appl. Phys., vol. 24, no. 8, pp. 981–988, 1953. DOI: https://doi.org/10.1063/1.1721448.
- Q. Jian, L. Wang, and Y. Shui, “Thermal analysis of ventilated brake disc based on heat transfer enhancement of heat pipe,” Int. J. Therm. Sci., vol. 155, pp. 106356, Sep 2020. DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106356.
- A. Belhocine and A. Afzal, “Finite element modeling of thermomechanical problems under the vehicle braking process,” Multiscale Multidiscip. Model. Exp. Des., vol. 3, no. 1, pp. 53–76, 2020. DOI: https://doi.org/10.1007/s41939-019-00059-w.