References
- N. Guo, Á. D. García Llamas, T. Li, K. Umeki, R. Gebart and T. Løvås, “Computational fluid dynamic simulations of thermochemical conversion of pulverized biomass in a dilute flow using spheroidal approximation,” Fuel., vol. 271, pp. 117495, 2020. DOI: https://doi.org/10.1016/j.fuel.2020.117495.
- A. K. Gupta and R. P. Chhabra, “Spheroids in viscoplastic fluids: drag and heat transfer,” Ind. Eng. Chem. Res., vol. 53, no. 49, pp. 18943–18965, 2014. DOI: https://doi.org/10.1021/ie501256v.
- N. Santo, D. Portnikov, N. M. Tripathi and H. Kalman, “Experimental study on the particle velocity development profile and acceleration length in horizontal dilute phase pneumatic conveying systems,” Powder Technol., vol. 339, pp. 368–376, 2018. DOI: https://doi.org/10.1016/j.powtec.2018.07.074.
- J. Wu, L. Wu, F. Wan, J. Rantanen, D. Cun and M. Yang, “Effect of thermal and shear stresses in the spray drying process on the stability of siRNA dry powders,” Int. J. Pharm., vol. 566, pp. 32–39, 2019. DOI: https://doi.org/10.1016/j.ijpharm.2019.05.019
- H. Zhang, B. Xiong, X. An, C. Ke and G. Wei, “Numerical investigation on the effect of the incident angle on momentum and heat transfer of spheroids in supercritical water,” Comput. Fluid., vol. 179, pp. 533–542, [2019. Mismatch] DOI: https://doi.org/10.1016/j.compfluid.2018.11.026.
- R. Basit, X. Li, Z. Huang, Q. Zhou and M. M. Bhatti, “Heat Transfer Studies of Arrays of Prolate Particles in Gas-Solid Flows,” Math. Problem. Eng., vol. 2020, pp. 1–12, 2020. DOI: https://doi.org/10.1155/2020/6639172.
- B. Sreenivasulu and B. Srinivas, “Mixed convection heat transfer from a spheroid to a Newtonian fluid,” Int. J. Therm. Sci., vol. 87, pp. 1–18, 2015. DOI: https://doi.org/10.1016/j.ijthermalsci.2014.08.002.
- V. S. Zubkov, et al., “Mathematical modelling of heating and evaporation of a spheroidal droplet,” Int. J. Heat Mass Transf., vol. 108, pp. 2181–2190, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.074.
- N. Kishore and S. Gu, “Momentum and heat transfer phenomena of spheroid particles at moderate Reynolds and Prandtl numbers,” Int. J. Heat Mass Transf., vol. 54, no. 11-12, pp. 2595–2601, 2011. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2011.02.001.
- Clift, R. Grace and J. R. Weber ME, 1978, Bubbles, Drops and Particles. New York: Academic Press,
- J. Happel and H. Brenner, 1983, Low Reynolds Number Hydrodynamics. The Hague, The Netherlands: Martinus Nijhoff.
- E. Michaelides, 2006. Particles, Bubbles & Drops: Their Motion, Heat and Mass Transfer. Singapore: World Scientific.
- S. Tonini and G. E. Cossali, “One-dimensional analytical approach to modelling evaporation and heating of deformed drops,” Int. J. Heat Mass Transf., vol. 97, pp. 301–307, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.004.
- A. Panahi, Y. A. Levendis, N. Vorobiev and M. Schiemann, “Direct observations on the combustion characteristics of Miscanthus and Beechwood biomass including fusion and spherodization,” Fuel Process. Technol., vol. 166, pp. 41–49, 2017. DOI: https://doi.org/10.1016/j.fuproc.2017.05.029.
- W. Zhong, A. Yu, G. Zhou, J. Xie and H. Zhang, “CFD simulation of dense particulate reaction system: Approaches, recent advances and applications,” Chem. Eng. Sci., vol. 140, pp. 16–43, 2016. DOI: https://doi.org/10.1016/j.ces.2015.09.035.
- C. Ke, S. Shu, H. Zhang and H. Yuan, “Drag coefficient and averaged Nusselt number of a scalene prolate ellipsoid,” Appl. Math. Modell., vol. 64, pp. 556–571, 2018. DOI: https://doi.org/10.1016/j.apm.2018.07.055.
- H. T. Estahbanati, P. EaJF and K. JaM, “Direct numerical simulation of non-isothermal flow through dense bidisperse random arrays of spheres,” Powder Technol., vol. 314, pp. 291–298, 2017. DOI: https://doi.org/10.1016/j.powtec.2016.09.088.
- S. Das, N. G. Deen and J. Kuipers, “A DNS study of flow and heat transfer through slender fixed-bed reactors randomly packed with spherical particles,” Chem. Eng. Sci., vol. 160, pp. 1–19, 2017. DOI: https://doi.org/10.1016/j.ces.2016.11.008.
- S. A. Patel and R. P. Chhabra, “Effect of the angle of incidence on laminar forced convection from an elliptical cylinder in Bingham plastic fluids,” Numer. Heat Transf. Part A: Appl., vol. 70, no. 8, pp. 917–937, 2016. DOI: https://doi.org/10.1080/10407782.2016.1214493.
- J. H. Masliyah and N. Epstein, 1972, “Numerical solution of heat and mass transfer from spheroids in steady axisymmetric flow,” In G. Hetsroni, J.P. Hartnett (ed.) Proceedings of the International Symposium on Two-Phase Systems, London, UK: Pergamon, pp. 613–632.
- G. Juncu, “Unsteady heat transfer from an oblate/prolate spheroid,” Int. J. Heat Mass Transf., vol. 53, no. 17–18, pp. 3483–3494, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.04.009.
- A. Richter and P. A. Nikrityuk, “Drag forces and heat transfer coefficients for spherical, cuboidal and ellipsoidal particles in cross flow at sub-critical Reynolds numbers,” Int. J. Heat Mass Transf., vol. 55, no. 4, pp. 1343–1354, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2011.09.005.
- A. Richter and P. A. Nikrityuk, “New correlations for heat and fluid flow past ellipsoidal and cubic particles at different angles of attack,” Powder Technol., vol. 249, pp. 463–474, 2013. DOI: https://doi.org/10.1016/j.powtec.2013.08.044.
- D. J. Gunn, “Transfer of heat or mass to particles in fixed and fluidised beds,” Int. J. Heat Mass Transf., vol. 21, no. 4, pp. 467–476, 1978. DOI: https://doi.org/10.1016/0017-9310(78)90080-7.
- N. Wakao, S. Kaguei and T. Funazkri, “Effect of fluid dispersion coefficients on particle-to-fluid heat transfer coefficients in packed beds: Correlation of nusselt numbers,” Chem. Eng. Sci., vol. 34, no. 3, pp. 325–336, 1979. DOI: https://doi.org/10.1016/0009-2509(79)85064-2.
- B. Zheng and E. J. Lavernia, 2011, “Melt Atomization,” In: Ashgriz N (ed) Handbook of Atomization and Sprays: Theory and Applications. Springer US, Boston, MA, pp. 837–848.
- G. Trapaga, E. F. Matthys, J. J. Valencia and J. Szekely, “Fluid flow, heat transfer, and solidification of molten metal droplets impinging on substrates,” MTB., vol. 23B, no. 6, pp. 701–718, 1992. DOI: https://doi.org/10.1007/BF02656450.
- C. Wang, C. Wang, B. Chen, M. Li and Z. Shen, “Fragmentation regimes during the thermal interaction between molten tin droplet and cooling water,” Int. J. Heat Mass Transf., vol. 166, pp. 120782, 2021. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.120782.
- T. A. Johnson and V. C. Patel, “Flow past a sphere up to a Reynolds number of 300,” J. Fluid Mech., vol. 378, pp. 19–70, 1999. DOI: https://doi.org/10.1017/S0022112098003206.
- N. Ellendt, A. M. Lumanglas, S. I. Moqadam and L. Mädler, “A model for the drag and heat transfer of spheres in the laminar regime at high temperature differences,” Int. J. Therm. Sci., vol. 133, pp. 98–105, 2018. DOI: https://doi.org/10.1016/j.ijthermalsci.2018.07.009.
- B. Sreenivasulu, B. Srinivas and K. V. Ramesh, “Forced convection heat transfer from a spheroid to a power law fluid,” Int. J. Heat Mass Transf., vol. 70, pp. 71–80, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.10.065.
- S. Whitaker, “Forced convection heat transfer correlations for flow in pipes, past flat plates, single cylinders, single spheres, and for flow in packed beds and tube bundles,” AIChE J., vol. 18, no. 2, pp. 361–371, 1972. DOI: https://doi.org/10.1002/aic.690180219.