References
- L. Irwin and Y. L. Moullec, “Turbines can use CO2 to cut CO2,” Science, vol. 356, no. 6340, pp. 805–806, 2017. DOI: https://doi.org/10.1126/science.aam8281.
- R. Chacartegui, J. M. Muñoz de Escalona, D. Sánchez, B. Monje, and T. Sánchez, “Alternative cycles based on carbon dioxide for central receiver solar power plants,” Appl. Therm. Eng., vol. 31, no. 5, pp. 872–879, 2011. DOI: https://doi.org/10.1016/j.applthermaleng.2010.11.008.
- B. D. Iverson, T. M. Conboy, J. J. Pasch, and A. M. Kruizenga, “Supercritical CO2 Brayton cycles for solar-thermal energy,” Appl. Energy, vol. 111, pp. 957–970, 2013. DOI: https://doi.org/10.1016/j.apenergy.2013.06.020.
- T. M. Conboy, M. D. Carlson, and G. E. Rochau, “Dry-cooled supercritical CO2 power for advanced nuclear reactors,” J. Eng. Gas Turbines Power, vol. 137, no. 1, p. 012901, 2014. DOI: https://doi.org/10.1115/1.4028080.
- A. A. Gkountas, A. M. Stamatelos, and A. I. Kalfas, “Recuperators investigation for high temperature supercritical carbon dioxide power generation cycles,” Appl. Therm. Eng., vol. 125, pp. 1094–1102, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.07.092.
- C. Li and H. Wang, “Power cycles for waste heat recovery from medium to high temperature flue gas sources - From a view of thermodynamic optimization,” Appl. Energy, vol. 180, pp. 707–721, 2016. DOI: https://doi.org/10.1016/j.apenergy.2016.08.007.
- M. Wang, P. Zhao, J. Wang, H. Li, and Y. Dai, “Conceptual design and parametric study of combined carbon dioxide/organic Rankine cycles,” Appl. Therm. Eng., vol. 103, pp. 759–772, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.04.046.
- A. A. Gkountas, A. M. Stamatelos, and A. I. Kalfas, “Thermodynamic modeling and comparative analysis of supercritical carbon dioxide Brayton cycle,” ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, June 26, 2017. DOI: https://doi.org/10.1115/GT2017-63990.
- M. Pizzarelli, “The status of the research on the heat transfer deterioration in supercritical fluids: A review,” Int. Commun. Heat Mass Transf., vol. 95, pp. 132–138, 2018. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2018.04.006.
- C. Eze, et al., “Numerical study on the heat transfer deterioration and its mitigations for supercritical CO2 flowing in a horizontal miniature tube,” Ann. Nucl. Energy, vol. 151, p. 107982, 2021. DOI: https://doi.org/10.1016/j.anucene.2020.107982.
- M. M. Ehsan, Z. Guan, and A. Y. Klimenko, “A comprehensive review on heat transfer and pressure drop characteristics and correlations with supercritical CO2 under heating and cooling applications,” Renew. Sustain. Energy Rev., vol. 92, pp. 658–675, 2018. DOI: https://doi.org/10.1016/j.rser.2018.04.106.
- I. L. Pioro and R. B. Duffey, “Experimental heat transfer in supercritical water flowing inside channels (survey),” Nucl. Eng. Des., vol. 235, no. 22, pp. 2407–2430, 2005. DOI: https://doi.org/10.1016/j.nucengdes.2005.05.034.
- V. A. Kurganov and A. G. Kaptilnyi, “Flow structure and turbulent transport of a supercritical pressure fluid in a vertical heated tube under the conditions of mixed convection. Experimental data,” Int. J. Heat Mass Transf., vol. 36, no. 13, pp. 3383–3392, 1993. DOI: https://doi.org/10.1016/0017-9310(93)90020-7.
- J. D. Jackson, “Models of heat transfer to fluids at supercritical pressure with influences of buoyancy and acceleration,” Appl. Therm. Eng., vol. 124, pp. 1481–1491, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2017.03.146.
- D. E. Kim and M.-H. Kim, “Experimental investigation of heat transfer in vertical upward and downward supercritical CO2 flow in a circular tube,” Int. J. Heat Fluid Flow, vol. 32, no. 1, pp. 176–191, 2011. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2010.09.001.
- B. Zhu, J. Xu, X. Wu, J. Xie, and M. Li, “Supercritical ‘boiling’ number, a new parameter to distinguish two regimes of carbon dioxide heat transfer in tubes,” Int. J. Therm. Sci., vol. 136, pp. 254–266, 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2018.10.032.
- Y.-Y. Bae, H.-Y. Kim, and T. H. Yoo, “Effect of a helical wire on mixed convection heat transfer to carbon dioxide in a vertical circular tube at supercritical pressures,” Int. J. Heat Fluid Flow, vol. 32, no. 1, pp. 340–351, 2011. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2010.06.013.
- Z. Li, Y. Wu, G. Tang, J. Lu, and H. Wang, “Numerical analysis of buoyancy effect and heat transfer enhancement in flow of supercritical water through internally ribbed tubes,” Appl. Therm. Eng., vol. 98, pp. 1080–1090, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.01.007.
- Z. Yang, W. Chen, and M. K. Chyu, “Numerical study on the heat transfer enhancement of supercritical CO2 in vertical ribbed tubes,” Appl. Therm. Eng., vol. 145, pp. 705–715, 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.09.081.
- C. Eze, et al., “Mitigation of heat transfer deterioration in a circular tube with supercritical CO2 using a novel small-scale multiple vortex generator,” Int. J. Therm. Sci., vol. 156, p. 106481, 2020. DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106481.
- K. Xu, L. Tang, and H. Meng, “Numerical study of supercritical-pressure fluid flows and heat transfer of methane in ribbed cooling tubes,” Int. J. Heat Mass Transf., vol. 84, pp. 346–358, 2015. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.01.041.
- A. Eter, D. Groeneveld, and S. Tavoularis, “Convective heat transfer in supercritical flows of CO2 in tubes with and without flow obstacles,” Nucl. Eng. Des., vol. 313, pp. 162–176, 2017. DOI: https://doi.org/10.1016/j.nucengdes.2016.12.016.
- Y. Xiao, J. Li, J. Deng, X. Gao, H. Gu, and J. Pan, “Study of spacer effects on deteriorated heat transfer of supercritical fluid flow in an annulus,” Prog. Nucl. Energy, vol. 123, p. 103306, 2020. DOI: https://doi.org/10.1016/j.pnucene.2020.103306.
- Z. Yang, X. Luo, W. Chen, and M. K. Chyu, “Effects of longitudinal vortex generators on the heat transfer deterioration of supercritical CO2 in vertical tubes,” Int. J. Heat Mass Transf., vol. 152, p. 119478, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119478.
- S. M. S. Murshed, K. C. Leong, and C. Yang, “A combined model for the effective thermal conductivity of nanofluids,” Appl. Therm. Eng., vol. 29, no. 11–12, pp. 2477–2483, 2009. DOI: https://doi.org/10.1016/j.applthermaleng.2008.12.018.
- S. P. Jang and S. U. S. Choi, “Role of Brownian motion in the enhanced thermal conductivity of nanofluids,” Appl. Phys. Lett., vol. 84, no. 21, pp. 4316–4318, May 2004. DOI: https://doi.org/10.1063/1.1756684.
- R. Prasher, P. Bhattacharya, and P. E. Phelan, “Brownian-motion-based convective-conductive model for the effective thermal conductivity of nanofluids,” J. Heat Transf., vol. 128, no. 6, pp. 588–595, Nov 2006. DOI: https://doi.org/10.1115/1.2188509.
- D. Zheng, J. Wang, Z. Chen, J. Baleta, and B. Sundén, “Performance analysis of a plate heat exchanger using various nanofluids,” Int. J. Heat Mass Transf., vol. 158, p. 119993, 2020. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119993.
- A. A. Gkountas, L. T. Benos, G. N. Sofiadis, and I. E. Sarris, “A printed-circuit heat exchanger consideration by exploiting an Al2O3-water nanofluid: Effect of the nanoparticles interfacial layer on heat transfer,” Therm. Sci. Eng. Prog., vol. 22, p. 100818, 2021. DOI: https://doi.org/10.1016/j.tsep.2020.100818.
- A. A. Gkountas, L. Th. Benos, K.-S. Nikas, and I. E. Sarris, “Heat transfer improvement by an Al2O3-water nanofluid coolant in printed-circuit heat exchangers of supercritical CO2 Brayton cycle,” Therm. Sci. Eng. Prog., vol. 20, p. 100694, 2020. DOI: https://doi.org/10.1016/j.tsep.2020.100694.
- A. A. Awais and M.-H. Kim, “Experimental and numerical study on the performance of a minichannel heat sink with different header geometries using nanofluids,” Appl. Therm. Eng., vol. 171, p. 115125, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115125.
- S. U. S. Choi, Z. G. Zhang, W. Yu, F. E. Lockwood, and E. A. Grulke, “Anomalous thermal conductivity enhancement in nanotube suspensions,” Appl. Phys. Lett., vol. 79, no. 14, pp. 2252–2254, 2001. DOI: https://doi.org/10.1063/1.1408272.
- A. de Risi, M. Milanese, and D. Laforgia, “Modelling and optimization of transparent parabolic trough collector based on gas-phase nanofluids,” Renew. Energy, vol. 58, pp. 134–139, 2013. DOI: https://doi.org/10.1016/j.renene.2013.03.014.
- M. Potenza, M. Milanese, G. Colangelo, and A. de Risi, “Experimental investigation of transparent parabolic trough collector based on gas-phase nanofluid,” Appl. Energy, vol. 203, pp. 560–570, 2017. DOI: https://doi.org/10.1016/j.apenergy.2017.06.075.
- A. Creti, et al., “Optical absorption measurements at high temperature (500 °C) of oxide nanoparticles for application as gas-based nanofluid in solar thermal collector systems,” Adv. Mater. Res., vol. 773, pp. 80–86, 2013.
- M. Abdelrahman, P. Fumeaux, and P. Suter, “Study of solid-gas-suspensions used for direct absorption of concentrated solar radiation,” Sol. Energy, vol. 22, no. 1, pp. 45–48, 1979. DOI: https://doi.org/10.1016/0038-092X(79)90058-6.
- B. Boissiere, R. Ansart, D. Gauthier, G. Flamant, and M. Hemati, “Experimental hydrodynamic study of gas-particle dense suspension upward flow for application as new heat transfer and storage fluid,” Can. J. Chem. Eng., vol. 93, no. 2, pp. 317–330, 2015. DOI: https://doi.org/10.1002/cjce.22087.
- S. Huang, B. Ruan, X. Gao, and Z. Yuan, “Numerical investigation on supercritical turbulent heat transfer of copper/n-decane nanofluid inside a miniature tube,” Numer. Heat Transf. A Appl., vol. 72, no. 12, pp. 921–935. 2017. DOI: https://doi.org/10.1080/10407782.2017.1412716.
- Z. Han, W. Zhou, W. Yu, and Z. Jia, “Experimental investigation on heat transfer of n-decane-ZnO nanofluids in a horizontal tube under supercritical pressure,” Int. Commun. Heat Mass Transf., vol. 121, p. 105108, 2021. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2021.105108.
- M. W. Chase, Jr., “NIST-JANAF thermochemical tables,” J. Phys. Chem. Ref. Data, Monogr., vol. 9, pp.156–161, 1682–1684, 1998.
- V. Bianco, F. Chiacchio, O. Manca, and S. Nardini, “Numerical investigation of nanofluids forced convection in circular tubes,” Appl. Therm. Eng., vol. 29, no. 17–18, pp. 3632–3642, 2009. DOI: https://doi.org/10.1016/j.applthermaleng.2009.06.019.
- B. Ruan, X. Gao, and H. Meng, “Numerical modeling of turbulent heat transfer of a nanofluid at supercritical pressure,” Appl. Therm. Eng., vol. 113, pp. 994–1003, 2017. DOI: https://doi.org/10.1016/j.applthermaleng.2016.11.092.
- X. Liu, X. Xu, C. Liu, S. Zhang, J. He, and C. Dang, “Flow structure at different stages of heat transfer deterioration with upward, mixed turbulent flow of supercritical CO2 heated in vertical straight tube,” Appl. Therm. Eng., vol. 181, p. 115987, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115987.
- ANSYS FLUENT 16.0 Theory Guide, ANSYS Inc., 2015.
- E. W. Lemmon, I. H. Bell, M. L. Huber, and M. O. McLinden, NIST standard reference database 23: Reference fluid thermodynamic and transport properties-REFPROP, version 9.1, National Institute of Standards and Technology, Stand. Ref. Data Program, Gaithersbg, 2018.
- R. L. Hamilton and O. K. Crosser, “Thermal conductivity of heterogeneous two-component systems,” Ind. Eng. Chem. Fund., vol. 1, no. 3, pp. 187–191, 1962. DOI: https://doi.org/10.1021/i160003a005.
- U. Rea, T. McKrell, L. Hu, and J. Buongiorno, “Laminar convective heat transfer and viscous pressure loss of alumina-water and zirconia-water nanofluids,” Int. J. Heat Mass Transf., vol. 52, no. 7–8, pp. 2042–2048, 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2008.10.025.
- D. L. Gee and R. L. Webb, “Forced convection heat transfer in helically rib-roughened tubes,” Int. J. Heat Mass Transf., vol. 23, no. 8, pp. 1127–1136, 1980. DOI: https://doi.org/10.1016/0017-9310(80)90177-5.
- Y. Li, F. Sun, G. Xie, and B. Sundén, “Numerical analysis of supercritical n-decane upward flow and heat transfer characteristics in the buffer layer of a vertical tube,” Numer. Heat Transf. A Appl., vol. 77, no. 3, pp. 247–265, 2020. DOI: https://doi.org/10.1080/10407782.2019.1688049.
- M. Bazargan and M. Mohseni, “The significance of the buffer zone of boundary layer on convective heat transfer to a vertical turbulent flow of a supercritical fluid,” J. Supercrit. Fluids, vol. 51, no. 2, pp. 221–229, 2009. DOI: https://doi.org/10.1016/j.supflu.2009.08.004.
- W. Zhang, S. Wang, C. Li, and J. Xu, “Mixed convective heat transfer of CO2 at supercritical pressures flowing upward through a vertical helically coiled tube,” Appl. Therm. Eng., vol. 88, pp. 61–70, 2015. DOI: https://doi.org/10.1016/j.applthermaleng.2014.10.031.