References
- USDOE. “A technology roadmap for Generation IV nuclear energy systems,” Philosoph. Review, vol. 66, pp. 239–241, 2004.
- I. L. Pioro, “Introduction: Generation IV international forum,” Handbook Generation IV Nucl. Reactors, vol. 103, pp. 37–54, 2016.
- J. E. Kelly, “Generation IV International forum: A decade of progress through international cooperation,” Progress Nucl. Energy, vol. 77, pp. 240–246, 2014. DOI: https://doi.org/10.1016/j.pnucene.2014.02.010.
- Z. Bahman, “Generation IV nuclear reactors,” Nucl. Reactor Technol. Develop. Utiliz., pp. 213–246, 2020. DOI: https://doi.org/10.1016/B978-0-12-818483-7.00006-8.
- T. Schulenberg, C. Maraczy, J. Heinecke and W. Bernnat, “Design and analysis of a thermal core for a high performance light water reactor,” Nucl. Engng. Design, vol. 241, no. 11, pp. 4420–4426, 2011. DOI: https://doi.org/10.1016/j.nucengdes.2010.09.025.
- M. M. Rahman, D. X. Ji, M. S. Beni, H. C. Hei, W. D. He and J. Y. Zhao, “Supercritical water heat transfer for nuclear reactor applications: A review,” Ann. Nucl. Energy, vol. 97, pp. 53–65, 2016. DOI: https://doi.org/10.1016/j.anucene.2016.06.022.
- V. A. Kurganov, Y. A. Zeigarnik and I. V. Maslakova, “Heat transfer and hydraulic resistance of supercritical-pressure coolants. Part I: Specifics of thermophysical properties of supercritical pressure fluids and turbulent heat transfer under heating condition in round tubes (state of the art),” Int. J. Heat Mass Transfer, vol. 55, no. 11–12, pp. 3061–3075, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.01.031.
- H. Wang, L. Leung, W. S. Wang and Q. C. Bi, “A review on recent heat transfer studies to supercritical pressure water in channels,” APPl. Thermal Engng., vol. 142, pp. 573–596, 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.07.007.
- G. N. Xie, X. X. Xu, X. L. Lei, Z. H. Li, Y. Li and B. Sunden, “Heat transfer behaviors of some supercritical fluids: A review,” Chinese J. Aeronautics, vol. 35, no. 1, pp. 290–306, 2022. in press, online available. DOI: https://doi.org/10.1016/j.cja.2020.12.022.
- T. Schulenberg and L. Leung, “Super-critical water-cooled reactors,” Handbook Generation IV Nucl. Reactors, vol. 103, pp. 189–220, 2016.
- A. Kiss, E. Laurien and A. Aszodi, “Numerical simulation of a HPLWR fuel assembly flow with wrapped wire spacers,” International Conference on Advances in Nuclear Power Plants (ICAPP 2008), Karisruhe, Germany, 2008.
- J. Chen, Z. Q. Xiong, Y. Xiao and H. Y. Gu, “Experimental study on the grid-enhanced heat transfer at supercritical pressure in rod bundle,” APPl. Thermal Engng., vol. 156, pp. 299–309, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.04.073.
- V. G. Razumovskiy, E. M. Mayevskiy, A. E. Koloskov, E. N. Pis’mennyi and I. L. Pioro, “Heat transfer to water at supercritical parameters in vertical tubes, annular channels, 3-and 7- rod bundles,” 21st International Conference on Nuclear Engineering (ICONE21), Chengdu, Peoples R China, 2013.
- K. Podila and Y. F. Rao, “CFD analysis of flow and heat transfer in Canadian supercritical water reactor bundle,” Ann. Nucl. Energy, vol. 75, pp. 1–10, 2015. DOI: https://doi.org/10.1016/j.anucene.2014.07.039.
- M. Modirshanechi, K. Hooman, I. A. Abdi and P. Forooghi, “Numerical study of turbulent convective in upward flows of supercritical water in the triangular lattice fuel rod bundle,” 4th ASME Joint US-European Fluids Engineering Division Summer Meeting, Chicago, IL, 2014. DOI: https://doi.org/10.1115/FEDSM2014-21300.
- V. I. Deev, V. S. Kharitonov, A. N. Churkin and A. M. Baisov, “Heat transfer regimes for a flow of water at supercritical conditions in vertical channels,” Therm. Eng., vol. 64, no. 11, pp. 849–83, 2017. DOI: https://doi.org/10.1134/S0040601517110039.
- V. I. Deev, V. S. Kharitonov, A. M. Baisov and A. N. Churkin, “Universal dependencies for the description of heat transfer regimes in turbulent flow of supercritical fluids in channels of various geometries,” J. Supercritical Fluids, vol. 135, pp. 160–167, 2018. DOI: https://doi.org/10.1016/j.supflu.2018.01.019.
- H. Y. Gu, Z. X. Hu, D. Liu, Y. Xiao and X. Cheng, “Experimental studies on heat transfer to supercritical water in 2 × 2 rod bundle with two channels,” Nucl. Engng. Design, vol. 291, pp. 212–223, 2015. DOI: https://doi.org/10.1016/j.nucengdes.2015.05.028.
- I. Tahir, W. Siddique, I. Haq, K. Qureshi and A. U. Khan, “Numerical investigation of heat transfer to supercritical water in a 2 × 2 rod bundle with two channels,” Heat Trans Res., vol. 49, no. 2, pp. 103–118, 2018. DOI: https://doi.org/10.1615/HeatTransRes.2017019599.
- S. Y. Zhang, H. Y. Gu, Z. Q. Xiong and S. J. Gong, “Numerical investigation on heat transfer of supercritical fluid in a vertical 7-rod bundle,” J. Supercritical Fluids, vol. 92, pp. 8–15, 2014. DOI: https://doi.org/10.1016/j.supflu.2014.04.013.
- Z. Shang, “CFD investigation of vertical rod bundles of supercritical water-cooled nuclear reactor,” Nucl. Engng. Design, vol. 239, no. 11, pp. 2562–2575, 2009. DOI: https://doi.org/10.1016/j.nucengdes.2009.07.021.
- J. L. Gou, Z. Shang, Y. Ishiwarari, Y. Oka, M. Yamakawa and S. Ikejiri, “CFD analysis of heat transfer in subchannels of a super fast reactor,” Nucl. Engng. Design, vol. 240, no. 7, pp. 1819–1829, 2010. DOI: https://doi.org/10.1016/j.nucengdes.2010.03.013.
- H. Y. Gu, Y. Q. Yu, X. Cheng and X. J. Liu, “Numerical analysis of thermal-hydraulic behavior of supercritical water in a vertical upward/downward flow channels,” Nucl. Sci. Tech., vol. 19, no. 3, pp. 178–186, 2008. DOI: https://doi.org/10.1016/S1001-8042(08)60047-0.
- H. Y. Gu, X. Cheng and Y. H. Yang, “CFD analysis of thermal behavior in SCWR typical flow channels,” Nucl. Engng. Design, vol. 238, no. 12, pp. 3348–3359, 2008. DOI: https://doi.org/10.1016/j.nucengdes.2008.06.010.
- J. Yang, Y. Oka, Y. Ishiwatari, J. Liu and J. Yoo, “Numerical investigation of heat transfer in upward flows of supercritical water in circular tubes and tight fuel-rod bundles,” Nucl. Engng. Design, vol. 237, no. 4, pp. 420–430, 2007. DOI: https://doi.org/10.1016/j.nucengdes.2006.08.003.
- X. J. Liu and X. Cheng, “Thermal-hydraulic and neutron-physical characteristics of a new SCWR fuel assembly,” Ann. Nucl. Energy, vol. 36, no. 1, pp. 28–36, 2009. DOI: https://doi.org/10.1016/j.anucene.2008.11.001.
- T. Yang, X. J. Liu and X. Cheng, “Optimization of multilayer fuel assemblies for supercritical water-cooled reactors with mixed neutron spectrum,” Nucl. Engng. Design, vol. 249, pp. 159–165, 2012. DOI: https://doi.org/10.1016/j.nucengdes.2011.07.023.
- H. Wang, Q. C. Bi and L. C. Wang, “Heat transfer characteristics of supercritical water in a 2 × 2 rod bundle–numerical simulation and experimental validation,” APPl. Thermal Engng., vol. 100, pp. 730–743, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2016.02.083.
- W. S. Wang, L. W. Gou, G. Zhu, X. J. Liu and Q. C. Bi, “Experimental investigation on heat transfer of supercritical water flowing in the subchannel with grid spacer in Supercritical Water-Cooled Reactor,” Energies, vol. 13, no. 5, pp. 1016, 2020. DOI: https://doi.org/10.3390/en13051016.
- S. Chen, H. Y. Gu, M. L. Liu, Y. Xiao and D. W. Cui, “Experimental investigation on heat transfer to supercritical water in a three rod bundle with spacer grids,” APPl. Thermal Engng., vol. 164, pp. 114466, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114466.
- H. Mori, T. Kaida, M. Ohno, S. Yoshida and Y. Hamamoto, “Heat transfer to a supercritical pressure fluid flowing in sub-bundle channel,” J. Nucl. Sci. Tech., vol. 49, no. 4, pp. 373–383, 2012. DOI: https://doi.org/10.1080/00223131.2012.669240.
- V. Y. Agbodemegbe, X. Cheng, E. Akaho and F. Allotey, “An investigation of the split-type mixing vane on extent of crossflow between subchannels through the fuel rod gaps,” Ann. Nucl. Energy, vol. 88, pp. 174–185, 2016. DOI: https://doi.org/10.1016/j.anucene.2015.10.036.
- X. J. Zhu, S. Morooka and Y. Oka, “Numerical investigation of grid spacer effect on heat transfer of supercritical water flows in a tight rod bundle,” Int. J. Thermal Sci., vol. 76, pp. 245–257, 2014. DOI: https://doi.org/10.1016/j.ijthermalsci.2013.10.003.
- X. J. Zhu, S. Morooka and Y. Oka, “Numerical investigation on practicability of reducing MCST by using grid spacer in a tight rod bundle,” Nucl. Engng. Design, vol. 270, pp. 198–208, 2014. DOI: https://doi.org/10.1016/j.nucengdes.2014.01.009.
- P. Diller, N. Todreas and P. Hejzlar, “Thermal-hydraulic analysis for wire-wrapped PWR cores,” Nucl. Engng. Design, vol. 239, no. 8, pp. 1461–1470, 2009. DOI: https://doi.org/10.1016/j.nucengdes.2009.01.015.
- Y. Liang, et al., “An experimental study of supercritical drop and flow distribution on subchannels of a 37-pin wire-wrapped rod bundle,” APPl. Thermal Engng., vol. 174, pp. 115283, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115283.
- K. Podila and Y. F. Rao, “Assessment of CFD for the Canadian SCWR bundle with wire wraps,” Progress Nucl. Energy, vol. 77, pp. 373–380, 2014. DOI: https://doi.org/10.1016/j.pnucene.2014.02.009.
- Z. X. Hu, H. B. Li, J. Q. Tao, D. Liu and H. Y. Gu, “Experimental study on heat transfer of supercritical water flowing upward and downward in 2 × 2 rod bundle with wrapped wire,” Ann. Nucl. Energy, vol. 111, pp. 50–58, 2018. DOI: https://doi.org/10.1016/j.anucene.2017.08.042.
- H. Wang, Q. C. Bi and L. Leung, “Heat transfer from 2 × 2 wire wrapped rod bundle to supercritical pressure water,” Int. J. Heat Mass Transfer, vol. 97, pp. 486–501, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.036.
- H. Y. Gu, Z. X. Hu, D. Liu, H. B. Li, M. Zhao and X. Cheng, “Experimental study on heat transfer to supercritical water in 2 × 2 rod bundle with wire wraps,” Experimental Thermal Fluid Sci., vol. 70, pp. 17–28, 2016. DOI: https://doi.org/10.1016/j.expthermflusci.2015.08.015.
- R. Gajapathy, K. Velusamy, P. Selvaraj and P. Chellapandi, “CFD investigation of effect of helical wire-wrap parameters on the thermal hydraulic performance of 217 fuel pin bundle,” Ann. Nucl. Energy, vol. 77, pp. 498–513, 2015. DOI: https://doi.org/10.1016/j.anucene.2014.10.038.
- A. Kiss and B. Mervay, “Numerical analysis on the thermal hydraulic effect of wrapped wire spacer in a four rod fuel bundle,” Nucl. Engng. Design, vol. 342, pp. 276–307, 2019. DOI: https://doi.org/10.1016/j.nucengdes.2018.11.024.
- A. Eter, D. Groeneveld and S. Tavoularis, “An experimental investigation of supercritical heat transfer in a three-rod bundle equipped with wire-wrap and grid spacers and cooled by carbon dioxide,” Nucl. Engng. Design, vol. 303, pp. 173–191, 2016. DOI: https://doi.org/10.1016/j.nucengdes.2016.04.002.
- M. Pizzarelli, “The status of the research on the heat transfer deterioration in supercritical fluids: A review,” Int. Commun. Heat Mass Transfer, vol. 95, pp. 132–138, 2018. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2018.04.006.
- X. Cheng, X. J. Liu and Y. H. Yang, “A mixed core for supercritical water-cooled reactors,” Nucl. Engng. Tech., vol. 40, no. 2, pp. 117–126, 2008. DOI: https://doi.org/10.5516/NET.2008.40.2.117.
- H. Wang, Q. C. Bi, L. C. Wang, H. C. Lv and L. Leung, “Experimental investigation of heat transfer from a 2 × 2 rod bundle to supercritical pressure water,” Nucl. Engng. Design, vol. 275, pp. 205–218, 2014. DOI: https://doi.org/10.1016/j.nucengdes.2014.04.036.
- H. B. Li, M. Zhao, H. Y. Gu and D. H. Lu, “Experiment study of supercritical water heat transfer in bundle,” Atomic Energy Sci. Tech., vol. 49, pp. 2017–2023, 2015.
- J. B. Xiong, X. Cheng and Y. H. Yang, “Numerical analysis on supercritical water heat transfer in a 2 × 2 rod bundle,” Ann. Nucl. Energy, vol. 80, pp. 123–134, 2015. DOI: https://doi.org/10.1016/j.anucene.2015.02.005.
- E.W. Lemmon, M.L. Huber, M.O. McLinden, “NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 9.1, National Institute of Standards and Technology,” 2013.
- X. Cheng, B. Kuang and Y. H. Yang, “Numerical analysis of heat transfer in supercritical water cooled flow channels,” Nucl. Engng. Design, vol. 237, no. 3, pp. 240–252, 2007. DOI: https://doi.org/10.1016/j.nucengdes.2006.06.011.
- K. Podila and Y. F. Rao, “CFD modeling of supercritical water flow and heat transfer in a 2 × 2 fuel rod bundle,” Nucl. Engng. Design, vol. 301, pp. 279–289, 2016. DOI: https://doi.org/10.1016/j.nucengdes.2016.03.019.
- P. A. Durbin, “Separated flow computations with the k-epsilon-v2 model,” AIAA J., vol. 33, no. 4, pp. 659–664, 1995. DOI: https://doi.org/10.2514/3.12628.
- Z. R. Zhao, Y. T. Chen, B. Z. Sun, J. X. Shi, X. Yu and W. Z. Wu, “Non-uniform thermal-hydraulic behavior in a 61-rod bundle of supercritical water-cooled reactor,” APPl. Thermal Engng., vol. 171, pp. 114688, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114688.
- A. Taklifi, P. Hanafizadeh, M. Behabadi and A. Aliabadi, “Experimental investigation on heat transfer and pressure drop of supercritical water flows in an inclined rifled tube,” J. Supercritical Fluids, vol. 107, pp. 209–218, 2016. DOI: https://doi.org/10.1016/j.supflu.2015.09.011.
- S. Mao, T. Zhou, D. Wei, W. B. Liu and Y. T. Zhang, “Modeling of heat transfer of supercritical water in helical finned double pipe,” Int. J. Heat Mass Transfer, vol. 180, pp. 121754, 2021. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.121754.
- S. L. Li, Y. Q. Jiang, W. H. Cai, Q. Li, H. C. Zhang and Y. Ren, “The influence of structural parameters on heat transfer and pressure drop for hydrocarbon mixture refrigerant during condensation in enhanced spiral pipes,” APPl. Thermal Engng., vol. 140, pp. 759–774, 2018. DOI: https://doi.org/10.1016/j.applthermaleng.2018.05.093.