Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 84, 2023 - Issue 6
397
Views
4
CrossRef citations to date
0
Altmetric
Research Articles

Impact of vibration on heat transfer and flow properties of heat exchange surfaces

, , , , &
Pages 529-549 | Received 18 Aug 2022, Accepted 30 Oct 2022, Published online: 07 Nov 2022

References

  • J. Shen and J. M. Wang, “Review of heat transfer enhancement by vibration research results of domestic and abroad,” Appl. Chem. Ind., vol. 44, no. 7, pp. 1338–1345, 2015. DOI: 10.16581/j.cnki.issn1671-3206.2015.07.042.
  • A. E. Abdu-Razak, E. F. Abbas, and T. A. Tahseen, “The effect of vibration on the heat transfer from a vertical plate: A review,” Int. J. Therm. Eng., vol. 6, no. 3, pp. 1–5, 2020. DOI: 10.14445/23950250/IJTE-V6I3P101.
  • W. S. Fu and C. P. Huang, “Effects of a vibrational heat surface on natural convection in a vertical channel flow,” Int. J. Heat Mass Transf., vol. 49, no. 7–8, pp. 1340–1349, 2006. DOI: 10.1016/j.ijheatmasstransfer.2005.10.028.
  • W. J. Liu, Z. Q. Yang, B. Zhang, and P. Lv, “Experimental study on the effects of mechanical vibration on the heat transfer characteristics of tubular laminar flow,” Int. J. Heat Mass Transf., vol. 115, pp. 169–179, 2017. DOI: 10.1016/j.ijheatmass.
  • B. Adil, A. Aadel, and Y. Hamza, “Experimental investigation of the influence of mechanical forced vibrations and heat flux on coefficient of heat transfer,” Sci. J. University Zakho, vol. 6, no. 3, pp. 124–129, 2018. DOI: 10.25271/sjuoz.2018.6.3.519.
  • Y. L. Zhou and H. Chang, “Effect of heaving motion on two-phase flow in horizontal channel: Flow and heat transfer characteristics,” Int. J Therm. Sci., vol. 145, pp. 106044, 2019. DOI: 10.1016/j.ijthermalsci.2019.106044.
  • X. L. Zhang, B. L. Liu, J. Liu, X. G. Wang, and H. B. Zhang, “Experimental and numerical analysis of heat transfer and flow characteristics in parabolic ducts,” Int. J. Heat Mass Transf., vol. 147, pp. 118912, 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.118912.
  • X. L. Zhang, Y. L. Zhang, Z. M. Liu, and J. Liu, “Analysis of heat transfer and flow characteristics in typical cambered ducts,” Int. J. Therm. Sci., vol. 150, pp. 106226, 2020. DOI: 10.1016/j.ijthermalsci.2019.106226.
  • X. Y. Dong, X. D. Jin, P. Y. Li, Q. C. Bi, M. Gui, and T. Wang, “Experimental research on heat transfer and flow resistance properties in spiral twisted tube heat exchanger,” Appl. Therm. Eng., vol. 176, pp. 115397, 2020. DOI: 10.1016/j.applthermaleng.2020.115397.
  • A. M. Mohammed, S. Kapan, M. Sen, and N. Celi̇k, “Effect of vibration on heat transfer and pressure drop in a heat exchanger with turbulator,” Case Stud. Therm. Eng., vol. 28, pp. 101680, 2021. DOI: 10.1016/j.csite.2021.101680.
  • C. Zhai, M. Islam, M. M. Alam, R. Simmons, and I. Barsoum, “Parametric study of major factors affecting heat transfer enhancement in a circular tube with vortex generator Pairs,” Appl. Therm. Eng., vol. 153, pp. 330–340, 2019. DOI: 10.1016/j.applthermaleng.2019.03.018.
  • S. M. A. Abadi, A. Ahmadpour, and J. P. Meyer, “Effects of vibration on pool boiling heat transfer from a vertically aligned array of heated tubes,” Int. J. Multiphase Flow, vol. 118, pp. 97–112, 2019. DOI: 10.1016/j.ijmultiphaseflow.2019.06.006.
  • X. Y. Luo, W. C. Zhang, H. T. Dong, A. K. Thakur, B. Yang, and W. S. Zhao, “Numerical analysis of heat transfer enhancement of fluid past an oscillating circular cylinder in laminar flow regime,” Prog. Nucl. Energy, vol. 139, pp. 103853, 2021. DOI: 10.1016/j.pnucene.2021.103853.
  • C. Ozalp, D. B. Saydam, C. Polat, M. Soyler, and E. Hürdoğan, “The effect of a high-speed rotational oscillating cylinder on a heated cylinder,” Int. J. Heat Fluid Flow, vol. 95, pp. 108971, 2022. DOI: 10.1016/j.ijheatfluidflow.2022.108971.
  • M. Zhang, J. Xu, G. Zhao, and G. Hao, “Enhanced heat transfer characteristics and ampacity analysis of a high-voltage overhead transmission line under aeolian vibration,” IET Generation Transm Distrib., vol. 12, no. 12, pp. 2918–2925, 2018. DOI: 10.1049/iet-gtd.2017.1764.
  • Z. Khalefa, A. D. Dhia, and A. Hussain, “Enhancement heat transfer of corrugated plate by using forced vibration,” Wasit J. Eng. Sci., vol. 4, no. 2, pp. 2016, 2021. www.researchgate.net/publication/354527175.
  • A. R. Sarhan, M. R. Karim, Z. K. Kadhim, and J. Naser, “Experimental investigation on the effect of vertical vibration on thermal performances of rectangular flat plate,” Exp. Therm. Fluid Sci., vol. 101, pp. 231–240, 2019. DOI: 10.1016/j.expthermflusci.2018.10.024.
  • Y. F. Deng, Y. C. Tang, P. Wang, Z. M. Cao, and Y. Z. Liu, “Fluid–structure–thermal interaction of a self-fluttering membrane in turbulent channel flow,” Int. J. Heat Fluid Flow, vol. 94, pp. 108947, 2022. DOI: 10.1016/j.ijheatfluidflow.2022.108947.
  • H. Alimoradi, S. Zaboli, and M. Shams, “Numerical simulation of surface vibration effects on improvement of pool boiling heat transfer characteristics of nanofluid,” Korean J. Chem. Eng., vol. 39, no. 1, pp. 69–85, 2022. DOI: 10.1007/s11814-021-0895-0.
  • M. J. Aberuee, H. Ahmadikia, and M. Ziaei-Rad, “The effect of internal plate vibration on the rate of heat transfer in a glass recycling process dryer,” Int. J. Therm. Sci., vol. 156, pp. 106424, 2020. DOI: 10.1016/j.ijthermalsci.2020.106424.
  • L. Cheng, T. Luan, W. Du, and M. Xu, “Heat transfer enhancement by flow-induced vibration in heat exchangers,” Int. J. Heat Mass Transf., vol. 52, no. 3–4, pp. 1053–1057, 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.05.037.
  • Y. C. Su, M. L. Li, M. L. Liu, and G. D. Ma, “A study of the enhanced heat transfer of flow-induced vibration of a new type of heat transfer tube bundle-the planar bending elastic tube bundle,” Nucl. Eng. Des., vol. 309, pp. 294–302, 2016. DOI: 10.1016/j.nucengdes.2016.09.012.
  • K. H. Park, J. K. Min, J. K. Kim, S. H. Park, and M. Y. Ha, “A study on a flexible wing with up-down vibration in a pulsating flow of cooling air to improve heat transfer efficiency,” Heat Mass Transf., vol. 49, no. 10, pp. 1459–1470, 2013. DOI: 10.1007/s00231-013-1188-x.
  • J. S. Wang, X. Wang, and X. L. Liu, “Numerical investigation on flow behavior and heat transfer feature of flexible wings located at the bottom of a two-dimensional channel,” Appl. Therm. Eng., vol. 206, pp. 118112, 2022. DOI: 10.1016/j.applthermaleng.2022.118112.
  • B. Yuan, Y. Zhang, L. Liu, and J. Wei, “Heat transfer enhancement on micro-pin-finned surfaces under high-frequency reciprocating flow,” Appl. Therm. Eng., vol. 175, pp. 115378, 2020. DOI: 10.1016/j.applthermaleng.2020.115378.
  • S. Mohammadshahi, H. Samsam-Khayani, T. Cai, and K. C. Kim, “Experimental and numerical study on flow characteristics and heat transfer of an oscillating jet in a channel,” Int. J. Heat Fluid Flow, vol. 86, pp. 108701, 2020. DOI: 10.1016/j.ijheatfluidflow.2020.108701.
  • E. M. Wahba, “Derivation of the differential continuity equation in an introductory engineering fluid mechanics course,” Int. J Mech. Eng. Educ., vol. 50, no. 2, pp. 030641902110144, 2021. DOI: 10.1177/03064190211014460.
  • D. Li, et al., “Experimental research on vibration-enhanced heat transfer of fin-tube vehicle radiator,” Appl. Therm. Eng., vol. 180, pp. 115836, 2020. DOI: 10.1016/j.applthermaleng.2020.115836.
  • W. Y. Zhang, W. W. Yang, Y. H. Jiao, and D. W. Zhang, “Numerical study of periodical wall vibration effects on the heat transfer and fluid flow of internal turbulent flow,” Int. J. Therm. Sci., vol. 173, pp. 107367, 2022. DOI: 10.1016/j.ijthermalsci.2021.107367.
  • H. T. Chen, H. C. Tseng, S. W. Jhu, and J. R. Chang, “Numerical and experimental study of mixed convection heat transfer and fluid flow characteristics of plate-fin heat sinks,” Int. J. Heat Mass Transf., vol. 111, pp. 1050–1062, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.04.065.
  • Z. Y. Guo, W. Q. Tao, and R. K. Shah, “The field synergy (coordination) principle and its applications in enhancing single phase convective heat transfer,” Int. J. Heat Mass Transf., vol. 48, no. 9, pp. 1797–1807, 2005. DOI: 10.1016/j.ijheatmasstransfer.2004.11.007.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.