Energy buffer mechanism for heat transfer enhancement in grooved channel cooling with flow intermittency

References

• H. Y. Kim, B. H. Kang and J. M. Hyun, “Heat transfer in the thermally developing region of a pulsating channel flow,” Int. J. Heat Mass Transf., vol. 36, no. 17, pp. 4257–4266, Nov. 1993. DOI: 10.1016/0017-9310(93)90088-n.
   Web of Science ®Google Scholar
• B. Mehta and S. Khandekar, “Local experimental heat transfer of single-phase pulsating laminar flow in a square mini-channel,” Int. J. Therm. Sci., vol. 91, pp. 157–166, May 2015. DOI: 10.1016/j.ijthermalsci.2015.01.008.
   Web of Science ®Google Scholar
• H. W. Cho and J. M. Hyun, “Numerical solutions of pulsating flow and heat transfer characteristics in a pipe,” Int. J. Heat Fluid Flow, vol. 11, no. 4, pp. 321–330, Dec. 1990. DOI: 10.1016/0142-727X(90)90056-H.
   Web of Science ®Google Scholar
• D. A. Nield and A. V. Kuznetsov, “Forced convection with laminar pulsating flow in a channel or tube,” Int. J. Therm. Sci., vol. 46, no. 6, pp. 551–560, Jun. 2007. DOI: 10.1016/j.ijthermalsci.2006.07.011.
   Web of Science ®Google Scholar
• H. N. Hemida, M. N. Sabry, A. Abdel-Rahim and H. Mansour, “Theoretical analysis of heat transfer in laminar pulsating flow,” Int. J. Heat Mass Transf., vol. 45, no. 8, pp. 1767–1780, Apr. 2002. DOI: 10.1016/S0017-9310(01)00274-5.
   Web of Science ®Google Scholar
• M. Faghri, K. Javdani and A. Faghri, “Heat transfer with laminar pulsating flow in a pipe,” Lett. Heat Mass Transf., vol. 6, no. 4, pp. 259–270, Jul.–Aug. 1979. DOI: 10.1016/0094-4548(79)90013-4.
   Web of Science ®Google Scholar
• Z. Jun, Z. Danling, W. Ping and G. Hong, “An experimental study of heat transfer enhancement with a pulsating flow,” Heat Trans. Asian Res., vol. 33, no. 5, pp. 279–286, Jun. 2004. DOI: 10.1002/htj.20020.
   Google Scholar
• R. Siegel and M. Perlmutter, “Heat Transfer for Pulsating Laminar Duct Flow,” J. Heat Transf., vol. 84, no. 2, pp. 111–122, May 1962. DOI: 10.1115/1.3684307.
   Google Scholar
• N. Kurtulmuş and B. Sahin, “A review of hydrodynamics and heat transfer through corrugated channels,” Int. Commun. Heat Mass Transf., vol. 108, pp. 104307, Nov. 2019. DOI: 10.1016/j.icheatmasstransfer.2019.104307.
   Web of Science ®Google Scholar
• G. L. Wang, N. Qian and G. F. Ding, “Heat transfer enhancement in microchannel heat sink with bidirectional rib,” Int. J. Heat Mass Transf., vol. 136, pp. 597–609, Jun. 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.02.018.
   Web of Science ®Google Scholar
• L. Chai, G. D. Xia and H. S. Wang, “Parametric study on thermal and hydraulic characteristics of laminar flow in microchannel heat sink with fan-shaped ribs on sidewalls - Part 3: Performance evaluation,” Int. J. Heat Mass Transf., vol. 97, pp. 1091–1101, Jun. 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.02.075.
   Web of Science ®Google Scholar
• L. Chai, G. D. Xia and H. S. Wang, “Parametric study on thermal and hydraulic characteristics of laminar flow in microchannel heat sink with fan-shaped ribs on sidewalls - Part 2: Pressure drop,” Int. J. Heat Mass Transf., vol. 97, pp. 1081–1090, Jun. 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.02.076.
   Web of Science ®Google Scholar
• Q. F. Zhu, et al., “Fluid flow and heat transfer characteristics of microchannel heat sinks with different groove shapes,” Int. J. Therm. Sci., vol. 161, pp. 106721, Mar. 2021. DOI: 10.1016/j.ijthermalsci.2020.106721.
   Web of Science ®Google Scholar
• G. D. Xia, L. Chai, H. Y. Wang, M. Z. Zhou and Z. Z. Cui, “Optimum thermal design of microchannel heat sink with triangular reentrant cavities,” Appl. Therm. Eng., vol. 31, no. 6-7, pp. 1208–1219, May 2011. DOI: 10.1016/j.applthermaleng.2010.12.022.
   Web of Science ®Google Scholar
• H. E. Ahmed and M. I. Ahmed, “Optimum thermal design of triangular, trapezoidal and rectangular grooved microchannel heat sinks,” Int. Commun. Heat Mass Transf., vol. 66, pp. 47–57, Aug. 2015. DOI: 10.1016/j.icheatmasstransfer.2015.05.009.
   Web of Science ®Google Scholar
• G. D. Xia, D. D. Ma, Y. L. Zhai, Y. F. Li, R. Liu and M. Du, “Experimental and numerical study of fluid flow and heat transfer characteristics in microchannel heat sink with complex structure,” Energy Convers. Manag., vol. 105, pp. 848–857, Nov. 2015. DOI: 10.1016/j.enconman.2015.08.042.
   Web of Science ®Google Scholar
• N. Kurtulmuş, H. Zontul and B. Sahin, “Heat transfer and flow characteristics in a sinusoidally curved converging-diverging channel,” Int. J. Therm. Sci., vol. 148, pp. 106163, Feb. 2020. DOI: 10.1016/j.ijthermalsci.2019.106163.
   Web of Science ®Google Scholar
• Q. Zhu, et al., “Heat transfer enhancement for microchannel heat sink by strengthening fluids mixing with backward right-angled trapezoidal grooves in channel sidewalls,” Int. Commun. Heat Mass Transf., vol. 135, pp. 106106, Jun. 2022. DOI: 10.1016/j.icheatmasstransfer.2022.106106.
   Web of Science ®Google Scholar
• J. P. Abraham, E. M. Sparrow and R. D. Lovik, “Unsteady, three-dimensional fluid mechanic analysis of blood flow in plaque-narrowed and plaque-freed arteries,” Int. J. Heat Mass Transf., vol. 51, no. 23-24, pp. 5633–5641, Nov. 2008. DOI: 10.1016/j.ijheatmasstransfer.2008.04.038.
   Web of Science ®Google Scholar
• C. S. Wang, T. C. Wei, P. Y. Shen and T. M. Liou, “Lattice Boltzmann study of flow pulsation on heat transfer augmentation in a louvered microchannel heat sink,” Int. J. Heat Mass Transf., vol. 148, pp. 119139, Feb. 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119139.
   Web of Science ®Google Scholar
• S. W. Chang and T. H. Cheng, “Thermal performance of channel flow with detached and attached pin-fins of hybrid shapes under inlet flow pulsation,” Int. J. Heat Mass Transf., vol. 164, pp. 120554, Jan. 2021. DOI: 10.1016/j.ijheatmasstransfer.2020.120554.
   Web of Science ®Google Scholar
• D. X. Jin, Y. P. Lee and D. Y. Lee, “Effects of the pulsating flow agitation on the heat transfer in a triangular grooved channel,” Int. J. Heat Mass Transf., vol. 50, no. 15-16, pp. 3062–3071, Jul. 2007. DOI: 10.1016/j.ijheatmasstransfer.2006.12.001.
   Web of Science ®Google Scholar
• H. Zontul and B. Şahin, “Experimental investigation of convective heat transfer performance and hydrodynamics of pulsating flow through the rectangular grooved channel,” Exp. Therm. Fluid Sci., vol. 141, pp. 110796, Feb. 2023. DOI: 10.1016/j.expthermflusci.2022.110796.
   Web of Science ®Google Scholar
• H. Hamzah and B. Sahin, “Analysis of SWCNT-water nanofluid flow in wavy channel under turbulent pulsating conditions: Investigation of homogeneous and discrete phase models,” Int. J. Therm. Sci., vol. 184, pp. 108011, Feb. 2023. DOI: 10.1016/j.ijthermalsci.2022.108011.
   Web of Science ®Google Scholar
• M. Jafari, M. Farhadi and K. Sedighi, “Pulsating flow effects on convection heat transfer in a corrugated channel: A LBM approach,” Int. Commun. Heat Mass Transf., vol. 45, pp. 146–154, Jul. 2013. DOI: 10.1016/j.icheatmasstransfer.2013.04.006.
   Web of Science ®Google Scholar
• S. Akcay, “Numerical analysis of heat transfer improvement for pulsating flow in a periodic corrugated channel with discrete V-type winglets,” Int. Commun. Heat Mass Transf., vol. 134, pp. 105991, May 2022. DOI: 10.1016/j.icheatmasstransfer.2022.105991.
   Web of Science ®Google Scholar
• J. Muñoz-Cámara, D. Crespí-Llorens, J. P. Solano and P. Vicente, “Baffled tubes with superimposed oscillatory flow: Experimental study of the fluid mixing and heat transfer at low net Reynolds numbers,” Exp. Therm. Fluid Sci., vol. 123, pp. 110324, May 2021. DOI: 10.1016/j.expthermflusci.2020.110324.
   Web of Science ®Google Scholar
• Z. Habibi, M. Karami, M. Jarrahi, E. Shirani and H. Peerhossaini, “Some observations on the spatiotemporal orbits structure and heat transfer enhancement in pulsating flow,” Int. J. Therm. Sci., vol. 125, pp. 428–439, Mar. 2018. DOI: 10.1016/j.ijthermalsci.2017.12.006.
   Web of Science ®Google Scholar
• N. Kurtulmuş and B. Sahin, “Experimental investigation of pulsating flow structures and heat transfer characteristics in sinusoidal channels,” Int. J. Mech. Sci., vol. 167, pp. 105268, Feb. 2020. DOI: 10.1016/j.ijmecsci.2019.105268.
   Web of Science ®Google Scholar
• H. Huang, Y. N. Bian, Y. Liu, F. G. Zhang, H. Arima and Y. Ikegami, “Numerical and experimental analysis of heat transfer enhancement and pressure drop characteristics of laminar pulsatile flow in grooved channel with different groove lengths,” Appl. Therm. Eng., vol. 137, pp. 632–643, Jun. 2018. DOI: 10.1016/j.applthermaleng.2018.04.013.
   Web of Science ®Google Scholar
• S. Chokphoemphun, S. Hongkong, S. Thongdaeng and S. Chokphoemphun, “ Experimental study and neural networks prediction on thermal performance assessment of grooved channel air heater,” Int. J. Heat Mass Transf., vol. 163, pp. 120397, Dec. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120397.
   Web of Science ®Google Scholar
• Z. H. Zhang, Q. H. Li, C. Bruecker and Q. Zhang, “Enhanced thermal performance with high-amplitude intermittent impingement cooling,” Int. J. Heat Mass Transf., vol. 185, pp. 122359, Apr. 2022. DOI: 10.1016/j.ijheatmasstransfer.2021.122359.
   Web of Science ®Google Scholar
• S. Eiamsa-Ard and P. Promvonge, “Numerical study on heat transfer of turbulent channel flow over periodic grooves,” Int. Commun. Heat Mass Transf., vol. 35, no. 7, pp. 844–852, Aug. 2008. DOI: 10.1016/j.icheatmasstransfer.2008.03.008.
   Web of Science ®Google Scholar
• H. G. Weller, G. Tabor, H. Jasak and C. Fureby, “A tensorial approach to computational continuum mechanics using object-oriented techniques,” Comput. Phys., vol. 12, no. 6, pp. 620–631, Nov.–Dec. 1998. DOI: 10.1063/1.168744.
   Google Scholar
• S. Uchida, “The pulsating viscous flow superposed on the steady laminar motion of incompressible fluid in a circular pipe,” J. Appl. Math. Phys. (ZAMP), vol. 7, no. 5, pp. 403–422, Jan. 1956. DOI: 10.1007/BF01606327.
   Google Scholar
• B. Ünsal, S. Ray, F. Durst and Ö. Ertunç, “Pulsating laminar pipe flows with sinusoidal mass flux variations,” Fluid Dyn. Res., vol. 37, no. 5, pp. 317–333, Nov. 2005. DOI: 10.1016/j.fluiddyn.2005.06.002.
   Web of Science ®Google Scholar
• R. L. Webb, “Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design,” Int. J. Heat Mass Transf., vol. 24, no. 4, pp. 715–726, Apr. 1981. DOI: 10.1016/0017-9310(81)90015-6.
   Web of Science ®Google Scholar
• S. Kimura and A. Bejan, “The “heatline” visualization of convective heat transfer,” J. Heat Transf., vol. 105, no. 4, pp. 916–919, Nov. 1983. DOI: 10.1115/1.3245684.
   Web of Science ®Google Scholar
• K. Hooman, H. Gurgenci and I. Dincer, “Heatline and energy-flux-vector visualization of natural convection in a porous cavity occupied by a fluid with temperature-dependent viscosity,” J. Por. Media, vol. 12, no. 3, pp. 265–275, Jan. 2009. DOI: 10.1615/JPorMedia.v12.i3.60.
   Web of Science ®Google Scholar
• K. Hooman, “Energy flux vectors as a new tool for convection visualization,” Int. J. Numer. Method, vol. 20, no. 2, pp. 240–249, Mar. 2010. DOI: 10.1108/09615531011016984.
   Web of Science ®Google Scholar