References
- K. Jiao, et al., “Designing the next generation of proton exchange membrane fuel cells,” Nature, vol. 595, no. 7867, pp. 361–369, Jul. 2021. DOI: 10.1038/s41586-021-03482-7.
- Y. Bo, et al., “A critical survey of proton exchange membrane fuel cell system control: summaries, advances, and perspectives,” Int. J. Hydrogen Energy, vol. 47, no. 17, pp. 9986–10020, Jan. 2022. DOI: 10.1016/j.ijhydene.2022.01.065.
- S. Zhou, et al., “A review on PEM multi-stack fuel cell systems: architecture, performance, and power management,” Appl. Energy, vol. 310, no. 48, pp. 118555, Mar. 2022. DOI: 10.1016/j.apenergy.2022.118555.
- L. Yang, et al., “Optimization and cutting-edge design of fuel-cell hybrid electric vehicles,” Int. J. Energy Res., vol. 45, no. 13, pp. 1–32, Jul. 2021. DOI: 10.1002/er.7094.
- C. Gong, et al., “Numerical and experimental investigation of enhanced heat transfer radiator through air deflection used in fuel cell vehicles,” Int. J. Heat Mass Transfer, vol. 183, no. 62, pp. 122205, Feb. 2021. DOI: 10.1016/j.ijheatmasstransfer.
- X. Lu, W. Xiang, R. Zhu and Z. Tu, “Modeling and thermal management of PEM fuel cell for fuel cell/battery hybrid automotive vehicle,” Int. J. Hydrogen Energy, vol. 47, no. 3, pp. 1888–1900, Jan. 2022. DOI: 10.1016/j.ijhydene.2021.10.146.
- G. Zhang and S. G. Kandlikar, “A critical review of cooling techniques in proton exchange membrane fuel cell stacks,” Int. J. Hydrogen Energy, vol. 37, no. 3, pp. 2412–2429, Feb. 2012. DOI: 10.1016/j.ijhydene.2011.11.010.
- Y. Li, G. Chang, Y. Xu and L. Zhang, “A review of MHP technology and its research status in cooling of Li-ion power battery and PEMFC,” Energy Fuels, vol. 34, no. 11, pp. 13335–13349, Nov. 2020. DOI: 10.1021/acs.energyfuels.0c02661.
- S. Navid, R. Roshandel and M. B. Shafii, “Integration of miniature heat pipes into a proton exchange membrane fuel cell for cooling applications,” Heat Transfer Eng., vol. 38, no. 16–18, pp. 1595–1605, Apr. 2017. DOI: 10.1080/01457632.2016.1262722.
- C. Han, T. Jiang, K. Shang, B. Xu and Z. Chen, “Heat and mass transfer performance of proton exchange membrane fuel cells with electrode of anisotropic thermal conductivity,” Int. J. Heat Mass Transfer, vol. 182, pp. 121957, Sep. 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121957.
- X. Yan, et al., “The use of phase-change cooling strategy in proton exchange membrane fuel cells: a numerical study,” Sci. China-Technol. Sci., vol. 64, no. 12, pp. 2762–2770, Nov. 2021. DOI: 10.1007/s11431-021-1889-4.
- M. I. Rosli, et al., “Performance analysis of PEMFC with single-channel and multi-channels on the impact of the geometrical model,” Energy, vol. 15, no. 21, pp. 7960, Nov. 2022. DOI: 10.3390/en15217960.
- Q. Y. Guo, J. Y. Zheng and Y. Z. Qin, “Optimization of block structure parameters of PEMFC novel block channels using artificial neural network,” Int. J. Hydrogen Energy, vol. 47, no. 90, pp. 38386–38394, Nov. 2022. DOI: 10.1016/j.ijhydene.2022.09.017.
- D. Salwinski, M. L. Soszko, W. Tokarz, M. Glinski and S. Bykuc, “Improving the current density and heat generation in a polymer electrolyte membrane fuel cell for four variants of anode channel,” Appl. Therm. Eng., vol. 216, no. 5, pp. 118954, Nov. 2022. DOI: 10.1016/j.applthermaleng.2022.118954.
- W. Yan, C. Yang, C. Y. Soong, F. Chen and S. Mei, “Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells,” J. Power Sources, vol. 160, no. 1, pp. 284–292, Sep. 2006. DOI: 10.1016/j.jpowsour.2006.01.031.
- Q. Li, Z. Liu, Y. S, S. Yang and C. D, “A review on temperature control of proton exchange membrane fuel cells,” Process, vol. 9, no. 2, pp. 235, Jan. 2021. DOI: 10.3390/pr9020235.
- T. Lochner, et al., “Temperature effects in polymer electrolyte membrane fuel cells,” ChemElectroChem, vol. 7, no. 17, pp. 3545–3568, Sep. 2020. DOI: 10.1002/celc.202000588.
- Z. Yang, et al., “Effects of U-type and Z-type configurations on proton exchange membrane fuel cell stack performances considering non-uniform flow distribution phenomena,” Int. J. Green Energy, vol. 19, no. 11, pp. 1160–1169, Nov. 2021. DOI: 10.1080/15435075.2021.1984925.
- S. A. Atyabi, E. Afshari, E. Zohravi and C. M. Udemu, “Three-dimensional simulation of different flow fields of PEM fuel cell using a multi-phase coupled model with cooling channel,” Energy, vol. 234, no. 47, pp. 121247, Jun. 2021. DOI: 10.1016/j.energy.2021.121247.
- L. Yue, S. Wang, Y. Zhu and Y. Fan, “Experimental study on cold start performance of PEMFC based on parallel flow channels,” Int. J. Hydrogen Energy, vol. 47, no. 1, pp. 540–550, Jan. 2022. DOI: 10.1016/j.ijhydene.2021.10.002.
- T. Miao, et al., “Current density and temperature distribution measurement and homogeneity analysis for a large-area proton exchange membrane fuel cell,” Energy, vol. 239, no. 48, pp. 121922, Sep. 2021. DOI: 10.1016/j.energy.2021.121922.
- P. L. Le, B. Singh, Y. S. Chen and A. Arpornwichanop, “An experimental study for optimizing the energy efficiency of a proton exchange membrane fuel cell with an open-cathode,” Int. J. Hydrogen Energy, vol. 46, no. 52, pp. 26507–26517, Jul. 2021. DOI: 10.1016/j.ijhydene.2021.05.135.
- X. X. Yu, H. W. Chang, J. J. Z and Z. K. Tu, “Effects of anode flow channel on performance of air-cooled proton exchange membrane fuel cell,” Energy Reports, vol. 11, no. 8, pp. 4443–4452, Feb. 2022. DOI: 10.1016/j.egyr.2022.03.128.
- D. T. Duy, “Anode and cathode flow field design and optimization of parametric performance of PEMFC,” Int. J. Electrochem. Sci, vol. 16, no. 10, pp. 211028, Oct. 2021. DOI: 10.20964/2021.10.05.
- J. Shen and Z. K. Tu, “Flow channel design in a proton exchange membrane fuel cell: from two-dimensional (2D) to three-dimensional (3D),” Int. J. Hydrogen Energy, vol. 47, no. 5, pp. 3087–3098, Jan. 2022. DOI: 10.1016/j.ijhydene.2021.10.252.
- Y. Zhou, et al., “A novel opposite sinusoidal wave flow channel for performance enhancement of proton exchange membrane fuel cell,” Energy, vol. 261, no. 15, pp. 125383, Dec. 2022. DOI: 10.1016/j.energy.2022.125383.
- S. M. Rahgoshay, A. A. Ranjbar, A. Ramiar and E. Alizadeh, “Thermal investigation of a PEM fuel cell with cooling flow field,” Energy, vol. 134, no. 1, pp. 61–73, Sep. 2017. DOI: 10.1016/j.energy.2017.05.151.
- M. Wang, Y. Ding, J. Hu, L. Xu and X. Yang, “Numerical simulation of water and heat transport in the cathode channel of a PEM fuel cell,” Int. J. Hydrogen Energy, vol. 47, no. 20, pp. 11007–11027, Mar. 2022. DOI: 10.1016/j.ijhydene.2022.01.143.
- G. Zhang, L. Fan, J. Sun and K. Jiao, “A 3D model of PEMFC considering detailed multiphase flow and anisotropic transport properties,” Int. J. Heat Mass Transfer, vol. 115, pp. 714–724, Jul. 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.07.102.
- K. Jiao and X. Li, “Water transport in polymer electrolyte membrane fuel cells,” Prog. Energ. Combust., vol. 37, no. 3, pp. 221–291, Jun. 2010. DOI: 10.1016/j.pecs.2010.06.002.
- H. Shen, et al., “Effect of the cooling water flow direction on the performance of PEMFCs,” Int. J. Heat Mass Transfer, vol. 189, no. 61, pp. 122303, Jun. 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.122303.
- H. Guo, H. Chen, F. Ye and C. Ma, “Baffle shape effects on mass transfer and power loss of PEM fuel cells with different baffled flow channels,” Int. J. Energy Res., vol. 43, no. 7, pp. 2737–2755, Jun. 2019. DOI: 10.1002/er.4328.
- F. C. Chen, Z. Gao, R. O. Loutfy and M. Hecht, “Analysis of optimal heat transfer in a PEM fuel cell cooling plate,” Fuel Cells, vol. 3, no. 4, pp. 181–188, Jan. 2004. DOI: 10.1002/fuce.200330112.