Enhanced thermal performance of the solidification process of nanopowder-phase change material-based latent thermal unit: Heat management

References

• C. Haiyun, H. Zhixiong, S. Yüksel and H. Dinçer, “Analysis of the innovation strategies for green supply chain management in the energy industry using the QFD-based hybrid interval valued intuitionistic fuzzy decision approach,” Renew. Sustain. Energy Rev., vol. 143, pp. 110844, 2021. DOI: 10.1016/j.rser.2021.110844.
   Web of Science ®Google Scholar
• Y. Wang, Z. Quan, H. Jing, L. Wang and Y. Zhao, “Performance and operation strategy optimization of a new dual-source building energy supply system with heat pumps and energy storage,” Energy Convers. Manag., vol. 239, pp. 114204, 2021. DOI: 10.1016/j.enconman.2021.114204.
   Web of Science ®Google Scholar
• M. Junginger, A. Faaij, R. Van Den Broek, A. Koopmans and W. Hulscher, “Fuel supply strategies for large-scale bio-energy projects in developing countries. Electricity generation from agricultural and forest residues in Northeastern Thailand,” Biomass Bioenergy, vol. 21, pp. 259–275, 2001. DOI: 10.1016/S0961-9534(01)00034-4.
   Web of Science ®Google Scholar
• X. J. Luo and K. F. Fong, “Development of integrated demand and supply side management strategy of multi-energy system for residential building application,” Appl. Energy, vol. 242, pp. 570–587, 2019. DOI: 10.1016/j.apenergy.2019.03.149.
   Web of Science ®Google Scholar
• G. Le Treut, J. Lefèvre, F. Lallana and G. Bravo, “The multi-level economic impacts of deep decarbonization strategies for the energy system,” Energy Policy, vol. 156, pp. 112423, 2021. DOI: 10.1016/j.enpol.2021.112423.
   Web of Science ®Google Scholar
• L. F. Cabeza, C. Castellón, M. Nogués, M. Medrano, R. Leppers and O. Zubillaga, “Use of microencapsulated PCM in concrete walls for energy savings,” Energy Build, vol. 39, pp. 113–119, 2007. DOI: 10.1016/j.enbuild.2006.03.030.
   Web of Science ®Google Scholar
• M. Akrami, et al., “Towards a sustainable greenhouse: Review of trends and emerging practices in analysing greenhouse ventilation requirements to sustain maximum agricultural yield,” Sustain, vol. 12, pp. 1–18, 2020. DOI: 10.3390/su12072794.
   PubMed Web of Science ®Google Scholar
• J. Luo, D. Zou, Y. Wang, S. Wang and L. Huang, “Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review,” Chem. Eng. J., vol. 430, pp. 132741, 2022. DOI: 10.1016/j.cej.2021.132741.
   Web of Science ®Google Scholar
• C. A. Ikutegbe and M. M. Farid, “Application of phase change material foam composites in the built environment: A critical review,” Renew. Sustain. Energy Rev., vol. 131, pp. 110008, 2020. DOI: 10.1016/j.rser.2020.110008.
   Web of Science ®Google Scholar
• G. Murali, G. S. N. Sravya, J. Jaya and V. N. Vamsi, “A review on hybrid thermal management of battery packs and it’s cooling performance by enhanced PCM," Renew,” Sustain. Energ. Rev., vol. 150, pp. 111513, 2021. DOI: 10.1016/j.rser.2021.111513.
   Web of Science ®Google Scholar
• W. Hua, L. Zhang and X. Zhang, “Research on passive cooling of electronic chips based on PCM: A review,” J. Mol. Liq., vol. 340, pp. 117183, 2021. DOI: 10.1016/j.molliq.2021.117183.
   Web of Science ®Google Scholar
• C. Guo and W. Zhang, “Numerical simulation and parametric study on new type of high temperature latent heat thermal energy storage system,” Energy Convers. Manag., vol. 49, pp. 919–927, 2008. DOI: 10.1016/j.enconman.2007.10.025.
   Web of Science ®Google Scholar
• J. M. Mahdi, S. Lohrasbi, D. D. Ganji and E. C. Nsofor, “Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger,” Int. J. Heat Mass Transf., vol. 124, pp. 663–676, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.03.095.
   Web of Science ®Google Scholar
• H. Wei and X. Li, “Preparation and characterization of a lauric-myristic-stearic acid/Al2O3-loaded expanded vermiculite composite phase change material with enhanced thermal conductivity,” Sol. Energy Mater. Sol. Cell., vol. 166, pp. 1–8, 2017. DOI: 10.1016/j.solmat.2017.03.003.
   Web of Science ®Google Scholar
• Y. Fu, Z. He, D. Mo and S. Lu, “Thermal conductivity enhancement of epoxy adhesive using graphene sheets as additives,” Int. J. Therm. Sci., vol. 86, pp. 276–283, 2014. DOI: 10.1016/j.ijthermalsci.2014.07.011.
   Web of Science ®Google Scholar
• S. Seddegh, X. Wang, A. D. Henderson and Z. Xing, “Solar domestic hot water systems using latent heat energy storage medium: A review,” Renew. Sustain. Energy Rev., vol. 49, pp. 517–533, 2015. DOI: 10.1016/j.rser.2015.04.147.
   Web of Science ®Google Scholar
• Y. Hasadi and J. M. Khodadadi, “Numerical simulation of solidification of colloids inside a differentially heated cavity,” J. Heat Transfer., vol. 137, pp. 072301, 2015. DOI: 10.1115/1.4029035.
   Web of Science ®Google Scholar
• H. Senobar, M. Aramesh and B. Shabani, “Nanoparticles and metal foams for heat transfer enhancement of phase change materials: A comparative experimental study,” J. Energy Storage, vol. 32, pp. 101911, 2020. DOI: 10.1016/j.est.2020.101911.
   Web of Science ®Google Scholar
• C. J. Ho and J. Y. Gao, “Preparation and thermophysical properties of nanoparticle-in-paraffin emulsion as phase change material,” Int. Commun. Heat Mass Transf., vol. 36, pp. 467–470, 2009. DOI: 10.1016/j.icheatmasstransfer.2009.01.015.
   Web of Science ®Google Scholar
• S. A. Nada, D. H. El-Nagar and H. M. S. Hussein, “Improving the thermal regulation and efficiency enhancement of PCM-Integrated PV modules using nano particles,” Energy Convers. Manag., vol. 166, pp. 735–743, 2018. DOI: 10.1016/j.enconman.2018.04.035.
   Web of Science ®Google Scholar
• I. Zarma, M. Ahmed and S. Ookawara, “Enhancing the performance of concentrator photovoltaic systems using Nanoparticle-phase change material heat sinks,” Energy Convers. Manag., vol. 179, pp. 229–242, 2019. DOI: 10.1016/j.enconman.2018.10.055.
   Web of Science ®Google Scholar
• H. Q. Jin, L. W. Fan, M. J. Liu, Z. Q. Zhu and Z. T. Yu, “A pore-scale visualized study of melting heat transfer of a paraffin wax saturated in a copper foam: Effects of the pore size,” Int. J. Heat Mass Transf., vol. 112, pp. 39–44, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.04.114.
   Web of Science ®Google Scholar
• Z. A. Qureshi, E. Elnajjar, O. Al-Ketan, R. A. Al-Rub and S. B. Al-Omari, “Heat transfer performance of a finned metal foam-phase change material (FMF-PCM) system incorporating triply periodic minimal surfaces (TPMS),” Int. J. Heat Mass Transf., vol. 170, pp. 121001, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121001.
   Web of Science ®Google Scholar
• Q. Ren, Y. L. He, K. Z. Suand and C. L. Chan, “Investigation of the effect of metal foam characteristics on the PCM melting performance in a latent heat thermal energy storage unit by pore-scale lattice Boltzmann modeling,” Numer. Heat Transf. Part A Appl., vol. 72, pp. 745–764, 2017. DOI: 10.1080/10407782.2017.1412224.
   Web of Science ®Google Scholar
• Y. Shiina and T. Inagaki, “Study on the efficiency of effective thermal conductivities on melting characteristics of latent heat storage capsules,” Int. J. Heat Mass Transf., vol. 48, pp. 373–383, 2005. DOI: 10.1016/j.ijheatmasstransfer.2004.07.043.
   Web of Science ®Google Scholar
• F. Agyenim, P. Eames and M. Smyth, “A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins,” Sol. Energy, vol. 83, pp. 1509–1520, 2009. DOI: 10.1016/j.solener.2009.04.007.
   Web of Science ®Google Scholar
• U. Stritih, “An experimental study of enhanced heat transfer in rectangular PCM thermal storage,” Int. J. Heat Mass Transf., vol. 47, pp. 2841–2847, 2004. DOI: 10.1016/j.ijheatmasstransfer.2004.02.001.
   Web of Science ®Google Scholar
• R. Velraj, R. V. Seeniraj, B. Hafner, C. Faber and K. Schwarzer, “Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unit,” Sol. Energy, vol. 60, pp. 281–290, 1997. DOI: 10.1016/S0038-092X(96)00167-3.
   Web of Science ®Google Scholar
• T. Bauer, “Approximate analytical solutions for the solidification of PCMs in fin geometries using effective thermophysical properties,” Int. J. Heat Mass Transf., vol. 54, pp. 4923–4930, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.07.004.
   Web of Science ®Google Scholar
• B. Lu, Y. Zhang, D. Sun, Z. Yuan and S. Yang, “Experimental investigation on thermal behavior of paraffin in a vertical shell and spiral fin tube latent heat thermal energy storage unit,” Appl. Therm. Eng., vol. 187, pp. 116575, 2021. DOI: 10.1016/j.applthermaleng.2021.116575.
   Web of Science ®Google Scholar
• V. Shatikian, G. Ziskind and R. Letan, “Numerical investigation of a PCM-based heat sink with internal fins: Constant heat flux,” Int. J. Heat Mass Transf., vol. 51, pp. 1488–1493, 2008. DOI: 10.1016/j.ijheatmasstransfer.2007.11.036.
   Web of Science ®Google Scholar
• V. Shatikian, G. Ziskind and R. Letan, “Numerical investigation of a PCM-based heat sink with internal fins,” Int. J. Heat Mass Transf., vol. 48, pp. 3689–3706, 2005. DOI: 10.1016/j.ijheatmasstransfer.2004.10.042.
   Web of Science ®Google Scholar
• J. Giro-Paloma, M. Martínez, L. F. Cabeza and A. I. Fernández, “Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review,” Renew. Sustain. Energy Rev., vol. 53, pp. 1059–1075, 2016. DOI: 10.1016/j.rser.2015.09.040.
   Web of Science ®Google Scholar
• A. Yataganbaba, B. Ozkahraman and I. Kurtbas, “Worldwide trends on encapsulation of phase change materials: A bibliometric analysis (1990–2015),” Appl. Energy, vol. 185, pp. 720–731, 2017. DOI: 10.1016/j.apenergy.2016.10.107.
   Web of Science ®Google Scholar
• Y. E. Milián, A. Gutiérrez, M. Grágeda and S. Ushak, “A review on encapsulation techniques for inorganic phase change materials and the in fl uence on their thermophysical properties,” Renew. Sustain. Energy Rev., vol. 73, pp. 983–999, 2017. DOI: 10.1016/j.rser.2017.01.159.
   Web of Science ®Google Scholar
• M. R. Hajizadeh, E. Abohamzeh, A. K. Tiwari, M. A. Sheremet, Z. Li and Q. V. Bach, “Discharging of PCM for ventilation system incorporating nanoparticles,” J. Mol. Liq., vol. 315, pp. 113696, 2020. DOI: 10.1016/j.molliq.2020.113696.
   Web of Science ®Google Scholar
• A. N. Keshteli and M. Sheikholeslami, “Influence of Al2O3 nanoparticle and Y-shaped fins on melting and solidification of paraffin,” J. Mol. Liq., vol. 314, pp. 113798, 2020. DOI: 10.1016/j.molliq.2020.113798.
   Web of Science ®Google Scholar
• M. Khatibi, R. Nemati-Farouji, A. Taheri, A. Kazemian, T. Ma and H. Niazmand, “Optimization and performance investigation of the solidification behavior of nano-enhanced phase change materials in triplex-tube and shell-and-tube energy storage units,” J. Energy Storage, vol. 33, pp. 102055, 2021. DOI: 10.1016/j.est.2020.102055.
   Web of Science ®Google Scholar
• J. M. Mahdi and E. C. Nsofor, “Solidification of a PCM with nanoparticles in triplex-tube thermal energy storage system,” Appl. Therm. Eng., vol. 108, pp. 596–604, 2021. DOI: 10.1016/j.applthermaleng.2016.07.130.
   Google Scholar
• D. C. Hyun, N. S. Levinson, U. Jeong and Y. Xia, “Emerging applications of phase-change materials (PCMs): teaching an old dog new tricks,” Angew. Chem. Int. Ed. Engl., vol. 53, pp. 3780–3795, 2014. DOI: 10.1002/anie.201305201.
   PubMed Web of Science ®Google Scholar
• M. M. Farid, A. M. Khudhair, S. A. K. Razack and S. Al-Hallaj, “A review on phase change energy storage: Materials and applications,” Energy Convers. Manag., vol. 45, pp. 1597–1615, 2004. DOI: 10.1016/j.enconman.2003.09.015.
   Web of Science ®Google Scholar
• F. Agyenim, N. Hewitt, P. Eames and M. Smyth, “A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS),” Renew. Sustain. Energy Rev., vol. 14, pp. 615–628, 2004. DOI: 10.1016/j.rser.2009.10.015.
   Google Scholar
• Z. Khan, Z. A. Khan and P. Sewell, “Heat transfer evaluation of metal oxides based nano-PCMs for latent heat storage system application,” Int. J. Heat Mass Transf., vol. 144, pp. 118619, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.118619.
   Web of Science ®Google Scholar
• A. Chibani and S. Merouani, “Acceleration of heat transfer and melting rate of a phase change material by nanoparticles addition at low Concentrations,” Int. J. Thermophys., vol. 42, pp. 1–16, 2019. DOI: 10.1007/s10765-021-02822-z.
   Web of Science ®Google Scholar
• J. M. Mahdi and E. C. Nsofor, “Solidification enhancement of PCM in a triplex-tube thermal energy storage system with nanoparticles and fins,” Appl. Energ., vol. 211, pp. 975–986, 2018. DOI: 10.1016/j.apenergy.2017.11.082.
   Web of Science ®Google Scholar
• A. Chibani, S. Merouani and F. Benmoussa, “Computational analysis of the melting process of Phase change material-metal foam-based latent thermal energy storage unit: The heat exchanger configuration,” J. Energy Storage, vol. 42, pp. 103071, 2021. DOI: 10.1016/j.est.2021.103071.
   Web of Science ®Google Scholar
• B. Kok, “Examining effects of special heat transfer fins designed for the melting process of PCM and Nano-PCM,” Appl. Therm. Eng., vol. 170, pp. 114989, 2020. DOI: 10.1016/j.applthermaleng.2020.114989.
   Web of Science ®Google Scholar
• I. Sarani, S. Payan, S. A. Nada and A. Payan, “Numerical investigation of an innovative discontinuous distribution of fins for solidification rate enhancement in PCM with and without nanoparticles,” Appl. Therm. Eng., vol. 176, pp. 115017, 2020. DOI: 10.1016/j.applthermaleng.2020.115017.
   Web of Science ®Google Scholar
• A. A. Al-Abidi, S. Mat, K. Sopian, M. Y. Sulaiman and A. T. Mohammad, “Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins,” Int. J. Heat Mass Transf., vol. 61, pp. 684–695, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.02.030.
   Web of Science ®Google Scholar
• A. Valan Arasu, A. P. Sasmito and A. S. Mujumdar, “Thermal performance enhancement of paraffin wax with Al2O3 and CuO nanoparticles - A numerical study,” Front. Heat Mass Transf., vol. 2, pp. 043005, 2019. DOI: 10.5098/hmt.v2.4.3005.
   Google Scholar