Publication Cover
Numerical Heat Transfer, Part A: Applications
An International Journal of Computation and Methodology
Volume 85, 2024 - Issue 4
265
Views
2
CrossRef citations to date
0
Altmetric
Research Articles

Investigating the effect of the presence of a pulsating heat pipe on the geometrical parameters of the microchannel heat sink

, , , &
Pages 553-569 | Received 10 Jan 2023, Accepted 22 Feb 2023, Published online: 21 Mar 2023

References

  • A. Tavakoli and K. Vafai, “Design and optimization of a composite heat spreader to improve the thermal management of a three-dimensional integrated circuit,” J. Heat Transfer, vol. 143, no. 10, 2021. DOI: 10.1115/1.4050922.
  • S. Lu and K. Vafai, “Optimization of the thermal performance of three-dimensional integrated circuits utilizing rectangular-shaped and disk-shaped heat pipes,” J. Heat Transfer, vol. 144, no. 6, Mar. 2022. DOI: 10.1115/1.4053803.
  • M. Ahmadian-Elmi, E. Rasouli, K. Vafai and S. S. Nourazar, “Parametric investigation of a rectangular microchannel utilizing the internal longitudinal fins to enhance its hydraulic and thermal characteristics,” Int. Commun. Heat Mass Transf, vol. 133, pp. 105946, 2022. DOI: 10.1016/j.icheatmasstransfer.2022.105946.
  • M. Ahmadian-Elmi, M. Mohammadifar, K. Vafai and S. S. Nourazar, “Investigation of the optimal configuration of a highly conductive material embedded in a triangular fin,” Numer. Heat Transf. Part A Appl, pp. 1–16, 2023. DOI: 10.1080/10407782.2022.2157352.
  • A. M. Adham, N. Mohd-Ghazali and R. Ahmad, “Thermal and hydrodynamic analysis of microchannel heat sinks: A review,” Renew. Sustain. Energy Rev, vol. 21, pp. 614–622, 2013. DOI: 10.1016/j.rser.2013.01.022.
  • D. Bastakoti, H. Zhang, D. Li, W. Cai and F. Li, “An overview on the developing trend of pulsating heat pipe and its performance,” Appl. Therm. Eng, vol. 141, pp. 305–332, Aug. 2018. DOI: 10.1016/j.applthermaleng.2018.05.121.
  • D. B. Tuckerman and R. F. W. Pease, “High-performance heat sinking for VLSI,” IEEE Electron. Device Lett., vol. 2, no. 5, pp. 126–129, 1981. DOI: 10.1109/EDL.1981.25367.
  • M. S. Lori and K. Vafai, “Heat transfer and fluid flow analysis of microchannel heat sinks with periodic vertical porous ribs,” Appl. Therm. Eng., vol. 205, pp. 118059, 2022. DOI: 10.1016/j.applthermaleng.2022.118059.
  • A. Ghahremannezhad, H. Xu, M. Alhuyi Nazari, M. Hossein Ahmadi and K. Vafai, “Effect of porous substrates on thermohydraulic performance enhancement of double layer microchannel heat sinks,” Int. J. Heat Mass Transf, vol. 131, pp. 52–63, 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.11.040.
  • A. Ghahremannezhad and K. Vafai, “Thermal and hydraulic performance enhancement of microchannel heat sinks utilizing porous substrates,” Int. J. Heat Mass Transf, vol. 122, pp. 1313–1326, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.02.024.
  • D.-Y. Lee and K. Vafai, “Comparative analysis of jet impingement and microchannel cooling for high heat flux applications,” Int. J. Heat Mass Transf, vol. 42, no. 9, pp. 1555–1568, 1999. DOI: 10.1016/S0017-9310(98)00265-8.
  • K. Vafai and A.-R. Khaled, “Analysis of flexible microchannel heat sink systems,” Int. J. Heat Mass Transf, vol. 48, no. 9, pp. 1739–1746, 2005. DOI: 10.1016/j.ijheatmasstransfer.2004.11.020.
  • A.-R. Khaled and K. Vafai, “Cooling augmentation using microchannels with rotatable separating plates,” Int. J. Heat Mass Transf, vol. 54, no. 15–16, pp. 3732–3739, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.02.054.
  • M. Pan, P. Huang and K. Vafai, “Investigation of the blockage conditions in a laminated-sheet microchannel reactor,” Chem. Eng. Technol, vol. 40, no. 12, pp. 2283–2294, 2017. DOI: 10.1002/ceat.201700189.
  • S. Lu and K. Vafai, “Thermal performance optimization of the 3D ICs employing the integrated chip-size double-layer or multi-layer microchannels,” J. Heat Transfer, vol. 145, pp. 032501, 2022. DOI: 10.1115/1.4055245.
  • D. S. Kumar and S. Jayavel, “Optimization of porous fin location and investigation of porosity and permeability effects on hydro-thermal behavior of rectangular microchannel heat sink,” Int. Commun. Heat Mass Transf, vol. 129, pp. 105737, 2021. DOI: 10.1016/j.icheatmasstransfer.2021.105737.
  • K. Derakhshanpour, R. Kamali and M. Eslami, “Effect of rib shape and fillet radius on thermal-hydrodynamic performance of microchannel heat sinks: A CFD study,” Int. Commun. Heat Mass Transf, vol. 119, pp. 104928, 2020. DOI: 10.1016/j.icheatmasstransfer.2020.104928.
  • Q. Zhu, et al., “Fluid flow and heat transfer characteristics of microchannel heat sinks with different groove shapes,” Int. J. Therm. Sci, vol. 161, no. October, pp. 106721, 2021. DOI: 10.1016/j.ijthermalsci.2020.106721.
  • S. Y. Jung and H. Park, “Experimental investigation of heat transfer of Al2O3 nanofluid in a microchannel heat sink,” Int. J. Heat Mass Transf, vol. 179, pp. 121729, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121729.
  • A. M. Ali, M. Angelino and A. Rona, “Numerical analysis on the thermal performance of microchannel heat sinks with Al2O3 nanofluid and various fins,” Appl. Therm. Eng, vol. 198, no. July, pp. 117458, 2021. DOI: 10.1016/j.applthermaleng.2021.117458.
  • Z. Soleymani, M. Rahimi, M. Gorzin and Y. Pahamli, “Performance analysis of hotspot using geometrical and operational parameters of a microchannel pin-fin hybrid heat sink,” Int. J. Heat Mass Transf, vol. 159, pp. 120141, 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120141.
  • H. W. Li, T. L. Chang, C. H. Du, N. Huang and Y. T. Jia, “Effects of electric field on flow boiling heat transfer characteristics in a microchannel heat sink with various orientations,” Int. J. Heat Mass Transf, vol. 181, pp. 121878, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121878.
  • M. J. Gibbons, M. Marengo and T. Persoons, “A review of heat pipe technology for foldable electronic devices,” Appl. Therm. Eng, vol. 194, pp. 117087, 2021. DOI: 10.1016/j.applthermaleng.2021.117087.
  • M. H. Zolfagharnasab, M. Z. Pedram and K. Vafai, “A robust single-phase approach for the numerical simulation of heat pipe,” Int. Commun. Heat Mass Transf, vol. 132, pp. 105894, 2022. DOI: 10.1016/j.icheatmasstransfer.2022.105894.
  • M. Shafahi, V. Bianco, K. Vafai and O. Manca, “An investigation of the thermal performance of cylindrical heat pipes using nanofluids,” Int. J. Heat Mass Transf, vol. 53, no. 1–3, pp. 376–383, 2010. DOI: 10.1016/j.ijheatmasstransfer.2009.09.019.
  • K. Alizad, K. Vafai and M. Shafahi, “Thermal performance and operational attributes of the startup characteristics of flat-shaped heat pipes using nanofluids,” Int. J. Heat Mass Transf., vol. 55, no. 1–3, pp. 140–155, 2012. DOI: 10.1016/j.ijheatmasstransfer.2011.08.050.
  • M. Egbo, “A review of the thermal performance of vapor chambers and heat sinks: Critical heat flux, thermal resistances, and surface temperatures,” Int. J. Heat Mass Transf, vol. 183, pp. 122108, 2022. DOI: 10.1016/j.ijheatmasstransfer.2021.122108.
  • J. Zhou, L. Liu, X. Yang, Y. Zhang and J. Wei, “Visualization research on influencing factors of flat heat pipes,” Appl. Therm. Eng, vol. 207, pp. 118193, 2022. DOI: 10.1016/j.applthermaleng.2022.118193.
  • V. S. Nikolayev, “Physical principles and state-of-the-art of modeling of the pulsating heat pipe: A review,” Appl. Therm. Eng, vol. 195, no. January, pp. 117111, 2021. DOI: 10.1016/j.applthermaleng.2021.117111.
  • C. H. Sun, C. Y. Tseng, K. S. Yang, S. K. Wu and C. C. Wang, “Investigation of the evacuation pressure on the performance of pulsating heat pipe,” Int. Commun. Heat Mass Transf, vol. 85, pp. 23–28, 2017. DOI: 10.1016/j.icheatmasstransfer.2017.04.005.
  • J. Lim and S. J. Kim, “Effect of a channel layout on the thermal performance of a flat plate micro pulsating heat pipe under the local heating condition,” Int. J. Heat Mass Transf, vol. 137, pp. 1232–1240, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.03.121.
  • S. M. Thompson, P. Cheng and H. B. Ma, “An experimental investigation of a three-dimensional flat-plate oscillating heat pipe with staggered microchannels,” Int. J. Heat Mass Transf., vol. 54, no. 17–18, pp. 3951–3959, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.04.030.
  • B. Markal, A. C. Candere, M. Avci and O. Aydin, “Effect of double cross sectional ratio on performance characteristics of pulsating heat pipes,” Int. Commun. Heat Mass Transf, vol. 127, pp. 105583, 2021. DOI: 10.1016/j.icheatmasstransfer.2021.105583.
  • J. Wang, Y. Pan and X. Liu, “Investigation on start-up and thermal performance of the single-loop pulsating heat pipe with variable diameter,” Int. J. Heat Mass Transf, vol. 180, pp. 121811, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121811.
  • D. Yin, H. Rajab and H. B. Ma, “Theoretical analysis of maximum filling ratio in an oscillating heat pipe,” Int. J. Heat Mass Transf, vol. 74, pp. 353–357, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.03.018.
  • M. Mameli, M. Marengo and S. Khandekar, “Local heat transfer measurement and thermo-fluid characterization of a pulsating heat pipe,” Int. J. Therm. Sci, vol. 75, pp. 140–152, 2014. DOI: 10.1016/j.ijthermalsci.2013.07.025.
  • J. Kim and S. J. Kim, “Experimental investigation on working fluid selection in a micro pulsating heat pipe,” Energy Convers. Manag, vol. 205, no. October 2019, pp. 112462, 2020. DOI: 10.1016/j.enconman.2019.112462.
  • X. D. Wang, B. An, L. Lin and D. J. Lee, “Inverse geometric optimization for geometry of nanofluid-cooled microchannel heat sink,” Appl. Therm. Eng, vol. 55, no. 1-2, pp. 87–94, 2013. DOI: 10.1016/j.applthermaleng.2013.03.010.
  • W. Qu and I. Mudawar, “Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink,” Int. J. Heat Mass Transf, vol. 45, no. 12, pp. 2549–2565, 2002. DOI: 10.1016/S0017-9310(01)00337-4.
  • Z. H. Wang, X. D. Wang, W. M. Yan, Y. Y. Duan, D. J. Lee and J. L. Xu, “Multi-parameters optimization for microchannel heat sink using inverse problem method,” Int. J. Heat Mass Transf, vol. 54, no. 13–14, pp. 2811–2819, 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.01.029.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.