Effects of casing cooling slot purge on heat transfer in turbine blade tip and casing

References

• A. H. Epstein, G. R. Guenette, R. J. G. Norton and C. Yuzhang, “Time resolved measurements of a turbine rotor stationary tip casing pressure & heat transfer field,” 21st Joint Propulsion Conference, 1985, p. 1220. DOI: 10.2514/6.1985-1220.
   Google Scholar
• S. J. Thorpe, R. J. Miller, S. Yoshino, R. W. Ainsworth and N. W. Harvey, “The effect of work processes on the casing heat transfer of a transonic turbine,” J. Turbomach., vol. 129, no. 1, pp. 84–91, Jan. 2007. DOI: 10.1115/1.2372772.
   Web of Science ®Google Scholar
• J. S. Kwak, et al., “Heat transfer coefficients on the squealer tip and near-tip regions of a gas turbine blade with single or double squealer,” J. Turbomach., vol. 124, no. 4, pp. 778–787, 2003. Oct. DOI: 10.1115/1.1626684.
   Google Scholar
• B. van Duikeren and A. Heselhaus, “Investigations at the over-tip casing of a high pressure turbine including off-design conditions and heat transfer correlations,” Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea, and Air. Volume 4: Heat Transfer, Parts a and B, 2008, pp. 583–592. DOI: 10.1115/GT2008-50625.
   Google Scholar
• T. Ochrymiuk, “Numerical investigations of the 3D transonic field and heat transfer at the over-tip casing in a HP-turbine stage,” Appl. Therm. Eng., vol. 103, no. 1, pp. 411–418, Jun. 2016. DOI: 10.1016/j.applthermaleng.2016.04.119.
   Google Scholar
• G. A. Thomas, N. R. Atkins, S. J. Thorpe, R. W. Ainsworth and N. W. Harvey, “The effect of a casing step on the over-tip aerothermodynamics of a transonic HP turbine stage,” Proceedings of the ASME Turbo Expo 2007: Power for Land, Sea, and Air. Volume 4: Turbo Expo 2007, Parts A and B 2007, pp. 597–608. DOI: 10.1115/GT2007-27780.
   Google Scholar
• J. S. Kwak and J. C. Han, “Heat transfer coefficients and film cooling effectiveness on the squealer tip of a gas turbine blade,” J. Turbomach., vol. 125, no. 4, pp. 648–657, Oct. 2003. DOI: 10.1115/1.1622712.
   Web of Science ®Google Scholar
• Z. Gao, D. Narzary, S. Mhetras and J. C. Han, “Effect of inlet flow angle on gas turbine blade tip film cooling,” J. Turbomach., vol. 131, no. 3, pp. 031005, Jul. 2009. DOI: 10.1115/1.2987235.
   Web of Science ®Google Scholar
• H. Ma, Q. Zhang, L. He, Z. Wang and L. Wang, “Cooling injection effect on a transonic squealer tip—part II: analysis of aerothermal interaction physics,” J. Eng. Gas Turbines Power, vol. 139, no. 5, pp. 052507, May 2017. DOI: 10.1115/1.4035200.
   Web of Science ®Google Scholar
• K. S. Chana, and B. Haller, “Novel turbine rotor shroud film-cooling design and validation: part 1,” Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea, and Air. Volume 3: Heat Transfer, 2009, pp. 955–967.
   Google Scholar
• K. S. Chana and B. Haller, “Novel turbine rotor shroud film-cooling design and validation: part 2,” Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea, and Air. Volume 3: Heat Transfer, 2009, pp. 969–977.
   Google Scholar
• M. Collins, K. Chana and T. Povey, “Application of film cooling to an unshrouded HP turbine casing,” Proceedings of the ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. Volume 5C: Heat Transfer, 2016, pp. V05CT19A025. DOI: 10.1115/GT2016-57387.
   Google Scholar
• A. Bonini, A. Andreini, C. Carcasci, B. Facchini, A. Ciani and L. Innocenti, “Conjugate heat transfer calculations on GT rotor blade for industrial applications. Part I: Equivalent internal fluid network setup and procedure description,” Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. Volume 4: Heat Transfer, Parts a and B. Copenhagen, 2012, pp. 669–679. DOI: 10.1115/GT2012-69846.
   Google Scholar
• A. Andreini, A. Bonini, R. Da Soghe, B. Facchini, A. Ciani and L. Innocenti, “Conjugate heat transfer calculations on GT rotor blade for industrial applications. Part II: Improvement of external flow modeling,” Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. Volume 4: Heat Transfer, Parts a and B, 2012, pp. 669–679. DOI: 10.1115/GT2012-69849.
   Google Scholar
• C. Gao, C. Liu, H. Liu, Q. Guo, R. Wang and H. Zhu, “Numerical investigation of unsteady film cooling on the turbine shroud with the blade passing,” Proceedings of the ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. Volume 5A: Heat Transfer, 2018, pp. V05AT12A010. DOI: 10.1115/GT2018-75695.
   Google Scholar
• M. Collins, K. Chana and T. Povey, “Improved methodologies for time-resolved heat transfer measurements, demonstrated on an unshrouded transonic turbine casing,” J. Turbomach., vol. 138, no. 11, pp. 111007, Nov. 2016. DOI: 10.1115/1.4033267.
   Web of Science ®Google Scholar
• M. Collins and T. Povey, “Exploitation of acoustic effects in film cooling,” J. Eng. Gas Turbines Power, vol. 137, no. 10, pp. 102602, Oct. 2015. DOI: 10.1115/1.4030102.
   Web of Science ®Google Scholar
• O. Tamunobere, C. Drewes and S. Acharya, “Heat transfer to an actively cooled shroud with blade rotation,” J. Therm. Sci. Eng. Appl., vol. 7, no. 4, pp. 041020, Dec. 2015. DOI: 10.1115/1.4031357.
   Web of Science ®Google Scholar
• O. Tamunobere and S. Acharya, “Turbine blade tip cooling with blade rotation—Part II: Shroud coolant injection,” J. Turbomach., vol. 138, no. 9, pp. 091003, Sep. 2016. DOI: 10.1115/1.4032673.
   Web of Science ®Google Scholar
• O. Tamunobere and S. Acharya, “Turbine shroud heat transfer and cooling with blade rotation Part I: Forward, backward and lateral injection,” Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Volume 5A: Heat Transfer, 2017, pp. V05AT13A012. DOI: 10.1115/GT2017-65102.
   Google Scholar
• O. Tamunobere and S. Acharya, “Turbine shroud heat transfer and cooling with blade rotation Part II: Effect of trenched holes with forward, backward and lateral injection,” Proceedings of the ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. Volume 5A: Heat Transfer, 2017, pp. V05AT13A013. DOI: 10.1115/GT2017-65107.
   Google Scholar
• Z. Zhou, S. Wang and S. Chen, “Numerical study of blade tip cooling at high speed with tip and pressure-side coolant injections,” Turbo Expo: Power Land Sea Air, 2018, pp. V05AT12A012. DOI: 10.1115/GT2018-75915.
   Google Scholar
• J. H. Nicholson, A. E. Forest, M. L. G. Oldfield and D. L. Schultz, “Heat transfer optimized turbine rotor blades—an experimental study using transient techniques,” J. Eng. Gas Turbines Power, vol. 106, no. 1, pp. 173–182, Jan1984. DOI: 10.1115/1.3239531.
   Web of Science ®Google Scholar
• B. Sen, D. L. Schmidt and D. G. Bogard, “Film cooling with compound angle holes: Heat transfer,” J. Turbomach., vol. 118, no. 4, pp. 800–806, Oct. 1996. DOI: 10.1115/1.2840937.
   Web of Science ®Google Scholar