Numerical simulation of flow and heat transfer induced by periodic motion of dual piezoelectric fans in confined volume

References

• M. W. Tian, M. S. Khorasani, H. Moria, S. Pourhedayat, and H. S. Dizaji, “Profit and efficiency boost of triangular vortex-generators by novel techniques,” Int. J. Heat Mass Transf., vol. 156, p. 119842, Aug. 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119842.
   Web of Science ®Google Scholar
• M. Samadifar and D. Toghraie, “Numerical simulation of heat transfer enhancement in a plate-fin heat exchanger using a new type of vortex generators,” Appl. Therm. Eng., vol. 133, pp. 671–681, Mar. 2018. DOI: 10.1016/j.applthermaleng.2018.01.062.
   Web of Science ®Google Scholar
• X. M. Ye, N. Zheng, R. X. Zhang, and C. X. Li, “Effect of serrated trailing-edge blades on aerodynamic noise of an axial fan,” J. Mech. Sci. Technol., vol. 36, no. 6, pp. 2937–2948, Jun. 2022. DOI: 10.1007/s12206-022-0526-7.
   Web of Science ®Google Scholar
• F. Czwielong, J. Soldat, and S. Becker, “On the interactions of the induced flow field of heat exchangers with axial fans,” Exp. Therm. Fluid Sci., vol. 139, p. 110697, Nov. 2022. DOI: 10.1016/j.expthermflusci.2022.110697.
   Web of Science ®Google Scholar
• M. Choi, C. Cierpka, and Y. H. Kim, “Vortex formation by a vibrating cantilever,” J. Fluids Struct., vol. 31, pp. 67–78, May 2012. DOI: 10.1016/j.jfluidstructs.2012.03.004.
   Web of Science ®Google Scholar
• T. Y. Wen and J. C. Ye, “Recent developments in air pumps for thermal management of electronics,” J. Electron. Packag., vol. 144, no. 3, p. 030802, Oct. 2022. DOI: 10.1115/1.4051970.
   Web of Science ®Google Scholar
• J. Q. Hu, K. Wang, L. Y. Xie, C. H. Min, and Z. H. Rao, “Effects of electromagnetic-vibration fan with folding blades on convective heat transfer,” Appl. Therm. Eng., vol. 213, p. 118651, Aug. 2022. DOI: 10.1016/j.applthermaleng.2022.118651.
   Web of Science ®Google Scholar
• Y. T. Chang, R. T. Wang, and J. C. Wang, “PMMA application in piezo actuation jet for dissipating heat of electronic devices,” Polymers, vol. 13, no. 16, p. 2596, Aug. 2021. DOI: 10.3390/polym13162596.
   PubMed Web of Science ®Google Scholar
• X. J. Li, W. W. Chen, and S. H. Lu, “Characterization of the thermal performance of multi piezoelectric fans for cooling a semi-cylindrical concave surface,” Int. J. Mech. Sci., vol. 208, p. 106672, Oct. 2021. DOI: 10.1016/j.ijmecsci.2021.106672.
   Web of Science ®Google Scholar
• J. Hu and C. Jin, “Experimental study on thermal performance improvement of solar air heater using piezoelectric fan,” IOP Conf. Ser. Mater. Sci. Eng., vol. 556, p. 012020, Aug. 2018. DOI: 10.1088/1757-899X/556/1/012020.
   Google Scholar
• R. T. Wang, J. C. Wang, and S. L. Chen, “Design and testing of a bearingless piezo jet micro heatsink,” J. Marine Sci. Technol.-Taiwan, vol. 30, no. 3, pp. 180–190, Sep. 2022. DOI: 10.51400/2709-6998.2575.
   Web of Science ®Google Scholar
• S. Singh, M. Zuber, M. N. Hamidon, N. Mazlan, A. A. Basri, and K. A. Ahmad, “Classification of actuation mechanism designs with structural block diagrams for flapping-wing drones: a comprehensive review,” Prog. Aerosp. Sci., vol. 132, p. 100833, Jul. 2022. DOI: 10.1016/j.parosci.2022.100833.
   Web of Science ®Google Scholar
• Y. J. Chen, D. Peng, and Y. Z. Liu, “Heat transfer enhancement of turbulent channel flow using a piezoelectric fan,” Int. J. Heat Mass Transf., vol. 147, p. 118964, Feb. 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.118964.
   Web of Science ®Google Scholar
• M. Toda, “Theory of air flow generation by a resonant type PVF2 bimorph cantilever vibrator,” Ferroelectrics, vol. 22, no. 1, pp. 911–918, 1978. DOI: 10.1080/00150197908239445.
   Web of Science ®Google Scholar
• T. AÇIkalin, S. M. Wait, S. V. Garimella, and A. Raman, “Experimental investigation of the thermal performance of piezoelectric fans,” Heat Transf. Eng., vol. 25, no. 1, pp. 4–14, 2004. DOI: 10.1080/01457630490248223.
   Web of Science ®Google Scholar
• Y. Chen, J. Li, Z. Wang, Y. Yan, and J. Cui, “Unsteady flow characteristics of an oscillating piezoelectric fan blade at high Reynolds numbers,” Appl. Sci., vol. 11, no. 20, pp. 9510–9510, Oct. 2021. DOI: 10.3390/app11209510.
   Google Scholar
• H. K. Ma, S. K. Liao, and Y. S. Lee, “Integration of a multiple piezoelectric fans system with a vapor chamber,” 33rd Annual Semiconductor Thermal Measurement, Modeling and Management Symposium (SEMI-THERM), pp. 144–149. San Jose, CA, Mar. 2017, DOI: 10.1109/SEMI-THERM.2017.7896922.
   Google Scholar
• C. Conway, N. Jeffers, A. Agarwal, and J. Punch, “Influence of thickness on the flow field generated by an oscillating cantilever beam,” Exp. Fluids, vol. 61, no. 7, p. 167, Jul. 2020. DOI: 10.1007/s00348-020-02997-5.
   Web of Science ®Google Scholar
• J. Tiwari, K. Kim, M. Zhang, and T. Yeom, “Experimental study on convection heat transfer enhancement of channel-flow with piezoelectric fan,” Heat Transf. Eng., vol. 44, no. 1, pp. 65–86, Jan. 2022. DOI: 10.1080/01457632.2022.2027105.
   Web of Science ®Google Scholar
• P. Ding and Z. Liu, “Study on the convective heat transfer characteristic of a horizontal piezoelectric fan,” The 3rd International Conference on Applied Mathematics, Modeling and Computer Simulation, vol. 1670, p. 012013, Sep. 2020. DOI: 10.1088/1742-6596/1670/1/012013.
   Google Scholar
• H. C. Chung, et al., “Development of piezoelectric fans for flapping wing application,” Sens. Actuators A: Phys., vol. 149, no. 1, pp. 136–142, Jan. 2009. DOI: 10.1016/j.sna.2008.10.004.
   Web of Science ®Google Scholar
• C. N. Lin, “Analysis of three-dimensional heat and fluid flow induced by piezoelectric fan," International,” J. Heat Mass Transf., vol. 55, no. 11–12, pp. 3043–3053, May 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.02.017.
   Web of Science ®Google Scholar
• S. F. Sufian, M. Z. Abdullah, M. K. Abdullah, and J. J. Mohamed, “Effect of side and tip gaps of a piezoelectric fan on microelectronic cooling,” IEEE Trans. Compon., Packag. Manufact. Technol., vol. 3, no. 9, pp. 1545–1553, Sep. 2013. DOI: 10.1109/TCPMT.2013.2251759.
   Web of Science ®Google Scholar
• M. K. Abdullah, N. C. Ismail, M. Z. Abdullah, M. A. Mujeebu, K. A. Ahmad, and Z. M. Ripin, “Effects of tip gap and amplitude of piezoelectric fans on the performance of heat sinks in microelectronic cooling,” Heat Mass Transf., vol. 48, no. 6, pp. 893–901, Jun. 2012. DOI: 10.1007/s00231-011-0944-z.
   Web of Science ®Google Scholar
• S. Dey and D. Chakrborty, “Enhancement of convective cooling using oscillating fins,” Int. Commun. Heat Mass Transf., vol. 36, no. 5, pp. 508–512, May 2009. DOI: 10.1016/j.icheatmasstransfer.2009.01.018.
   Web of Science ®Google Scholar
• A. Ihara and H. Watanabe, “On the flow around flexible plates, oscillating with large amplitude,” J. Fluids Struct., vol. 8, no. 7, pp. 601–619, Aug. 1994. DOI: 10.1006/jfls.1994.1030.
   Google Scholar
• M. Kimber and S. V. Garimella, “Cooling performance of arrays of vibrating cantilevers,” J. Heat Transf., vol. 131, no. 11, pp. 1314–1316, Nov. 2009. DOI: 10.1115/1.3153579.
   Web of Science ®Google Scholar
• S. F. Sufian, M. Z. Abdullah, and J. J. Mohamed, “Effect of synchronized piezoelectric fans on microelectronic cooling performance,” Int. Commun. Heat Mass Transf., vol. 43, pp. 81–89, 2013. DOI: 10.1016/j.icheatmasstransfer.2013.02.013.
   Web of Science ®Google Scholar
• M. Choi, S. Y. Lee, and Y. H. Kim, “On the flow around a vibrating cantilever pair with different phase angles,” Eur. J. Mech. - B/Fluids, vol. 34, pp. 146–157, Aug. 2012. DOI: 10.1016/j.euromechflu.2012.01.021.
   Web of Science ®Google Scholar
• M. Choi, C. Cierpka, and Y. H. Kim, “Effects of the distance between a vibrating cantilever pair,” Eur. J. Mech. - B/Fluids, vol. 43, pp. 154–165, Feb. 2014. DOI: 10.1016/j.euromechflu.2013.08.006.
   Web of Science ®Google Scholar
• L. Meirovitch, Principles and Techniques of Vibrations. Principles and Techniques of Vibrations. New Jersey: Prentice Hall, 1997, p. 603.
   Google Scholar
• T. J. C. Liu, Y. S. Chen, H. Y. Ho, and J. T. Liu, “Vibration and cooling performances of piezoelectric cooling fan: numerical and experimental investigations,” 6th International Conference on Mechatronics and Mechanical Engineering (ICMME), vol. 306, p. 04002, Nov. 2019. DOI: 10.1051/matecconf/202030604002.
   Google Scholar
• X. Li, J. Zhang, and X. Tan, “Convective heat transfer on a flat surface induced by a vertically-oriented piezoelectric fan in the presence of cross flow,” Heat Mass Transf., vol. 53, no. 9, pp. 2745–2768, Mar. 2017. DOI: 10.1007/s00231-017-2019-2.
   Web of Science ®Google Scholar
• X. Li, W. Chen, and S. Lu, “Investigation of the characteristics of turbulent flow and heat transfer induced by a vibrating piezoelectric fan on asymmetrical concave surfaces,” Proc. Inst. Mech. Eng. A: J. Power Energy, vol. 236, no. 1, pp. 81–95, Jun. 2021. DOI: 10.1177/09576509211026034.
   Web of Science ®Google Scholar
• Modeling Flows Using Sliding and Deforming Meshes, FLUENT 6.3.26, FLUENT. Inc., Lebanon, New Hampshire, 2006. Chapter 11.3.
   Google Scholar
• J. Tiwari and T. Yeom, “Enhancement of channel-flow convection heat transfer using piezoelectric fans,” Appl. Therm. Eng., vol. 191, p. 116917, Jun. 2021. DOI: 10.1016/j.applthermaleng.2021.116917.
   Web of Science ®Google Scholar