Confined flow past heated square cylinder for various inclination of lateral sides

References

• F. P. Incropera, “Convection heat transfer in electronic equipment cooling,” J. Heat Trans., vol. 110, no. 4b, pp. 1097–1111, 1988. DOI: 10.1115/1.3250613.
   Web of Science ®Google Scholar
• R. J. Yang and L. M. Fu, “Thermal and flow analysis of a heated electronic component,” Int. J. Heat Mass Transf., vol. 44, no. 12, pp. 2261–2275, 2001. DOI: 10.1016/S0017-9310(00)00265-9.
   Web of Science ®Google Scholar
• J. Davalath and Y. Bayazitoglu, “Forced convection cooling across rectangular blocks,” J. Heat Trans., vol. 109, no. 2, pp. 321–328, 1987. DOI: 10.1115/1.3248083.
   Web of Science ®Google Scholar
• C. Zing, S. Mahjoob, and K. Vafai, “Analysis of porous filled heat exchangers for electronic cooling,” Int. J Heat Mass Trans., vol. 133, pp. 268–276, 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.12.067.
   Web of Science ®Google Scholar
• R. Kalbasi, M. Afrand, J. Alsarraf, and M.-D. Tran, “Studies on optimum fins number in PCM-based heat sinks,” Energy, vol. 171, pp. 1088–1099, 2019. DOI: 10.1016/j.energy.2019.01.070.
   Web of Science ®Google Scholar
• P. W. Bearman and D. M. Trueman, “An investigation of the flow around rectangular cylinder,” Aeronaut.Quart, vol. 23, no. 3, pp. 229–237, 1972. DOI: 10.1017/S0001925900006119.
   Google Scholar
• A. Okajima, “Strouhal numbers of rectangular cylinders,” J. Fluid Mech., vol. 123, pp. 379–398, 1982. DOI: 10.1017/S0022112082003115.
   Web of Science ®Google Scholar
• C. Norberg, “Flow around rectangular cylinders: Pressure forces and wake frequencies,” J. Wind Eng. Ind. Aerodyn., vol. 49, no. 1–3, pp. 187–196, 1993. DOI: 10.1016/0167-6105(93)90014-F.
   Web of Science ®Google Scholar
• R. W. Davis and E. F. Moore, “A numerical study of vortex shedding from rectangles,” J. Fluid Mech., vol. 116, pp. 475–506, 1982. DOI: 10.1017/S0022112082000561.
   Web of Science ®Google Scholar
• A. Okajima, “Numerical simulation of flow around rectangular cylinders,” J. Wind Eng. Ind., vol. 33, no. 1–2, pp. 171–180, 1990. DOI: 10.1016/0167-6105(90)90033-9.
   Web of Science ®Google Scholar
• A. Sohankar, C. Norberg, and L. Davidson, “Numerical simulation of unsteady low-Reynolds number flow around rectangular cylinders at incidence,” J. Wind Eng. Ind. Aerodyn., vol. 69–71, pp. 189–201, 1997. DOI: 10.1016/S0167-6105(97)00154-2.
   Google Scholar
• A. K. Saha, G. Biswas, and K. Muralidhar, “Three-dimensional study of flow past a square cylinder at low Reynolds number,” Int. J. Heat Fluid Flow, vol. 24, no. 1, pp. 54–66, 2003. DOI: 10.1016/S0142-727X(02)00208-4.
   Web of Science ®Google Scholar
• S. Sen and S. Mittal, “Free vibration of a square cylinder at low Reynolds numbers,” J. Fluids Struct., vol. 27, no. 5–6, pp. 875–884, 2011. DOI: 10.1016/j.jfluidstructs.2011.03.006.
   Web of Science ®Google Scholar
• C. Dalton and W. Zheng, “Numerical solutions of a viscous uniform approach flowpast square and diamond cylinders,” J. Fluids Struct., vol. 17, pp. 455–465, 2003. DOI: 10.1016/j.jfluidstructs.2003.07.010.
   Google Scholar
• E. M. Sparrow, J. P. Abraham, and J. C. K. Tong, “Archival correlations for average heat transfer coefficients for 3 non-circular and circular cylinders and for spheres in 4 cross-flow,” Int. J. Heat Mass Trans., vol. 47, no. 24, pp. 5285–5296, 2004. DOI: 10.1016/j.ijheatmasstransfer.2004.06.024.
   Web of Science ®Google Scholar
• A. Sharma and V. Eswaran, “Heat and fluid flow across a square cylinder in the two-dimensional laminar flow regime,” Numer. Heat Trans. Part A, vol. 45, no. 3, pp. 247–269, 2004. DOI: 10.1080/10407780490278562.
   Web of Science ®Google Scholar
• L. E. Olsen, J. P. Abraham, L. Cheng, J. M. Gorman, and E. M. Sparrow, “Chapter six – Summary of forced-convection fluid flow and heat transfer for square cylinders of different aspect ratios ranging from the cube to a two-dimensional cylinder,” vol. 51, pp. 351–457, 2019. DOI: 10.1016/bs.aiht.2019.05.002.
   Google Scholar
• R. Senthilkumar and S. Jayavel, “Forced convective air-cooling effect on electronic components of different geometries and orientations at flow shedding region,” IEEE Trans. Comput., vol. 99, pp. 1–9, 2018. DOI: 10.1109/TCPMT.2018.2797185.
   Google Scholar
• A. Sharma and V. Eswaran, “Effect of channel confinement on the two-dimensional laminar flow and heat transfer across a square cylinder,” Numer. Heat Transf., vol. 47, no. 1, pp. 79–107, 2004. DOI: 10.1080/10407780490520760.
   Web of Science ®Google Scholar
• T. Tamura, T. Miyagi, and T. Kitagishi, “Numerical prediction of unsteady pressures on a square cylinder with various corner shapes,” J. Wind Eng. Ind. Aerodyn., vol. 74–76, pp. 531–542, 1998. DOI: 10.1016/s0167-6105(98)00048-8.
   Web of Science ®Google Scholar
• T. Tamura and T. Miyagi, “The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes,” J. Wind Eng. Ind. Aerodyn., vol. 83, no. 1–3, pp. 135–145, 1999. DOI: 10.1016/S0167-6105(99)00067-.
   Google Scholar
• A. Mola, G. Bordonaro, and M. R. Hajj, “Low-frequency variations of force coefficients on square cylinders with sharp and rounded corners,” J. Struct. Eng., vol. 135, no. 7, pp. 828–835, 2009.
   Web of Science ®Google Scholar
• J. C. Hu, Y. Zhou, and C. Dalton, “Effects of the corner radius on the near wake of a square prism,” Exp. Fluids, vol. 40, no. 1, pp. 106–118, 2006. DOI: 10.1007/s00348-005-0052-2.
   Web of Science ®Google Scholar
• J. C. K. Tong, E. M. Sprrow, W. J. Minkowycz, and J. P. Abraham, "A new archive of heat transfer coefficients from square and chamfered cylinders at angles of attack in crossflow", Int. J. Therm. Sci., vol. 105 pp. 218–223, 2016. DOI: 10.1016/j.ijthermalsci.2016.03.008.
   Google Scholar
• T. Ambreen and M. H. Kim, “Flow and Heat transfer characteristics over a square cylinder with corner modifications,” Int. J. Heat Mass Transf., vol. 117, pp. 50–57, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.09.132.
   Web of Science ®Google Scholar
• T. Abdelhamid, M. Alam, and M. Islam, “Heat transfer and flow around cylinder: Effect of corner radius and Reynolds number,” Int. J Heat Mass Transf., vol. 171, pp. 121105, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121105.
   Web of Science ®Google Scholar
• X. Sun, Z. Ye, J. Li, K. Wen, and H. Tian, “Forced convection heat transfer from a circular cylinder with a flexible fin,” Int. J. Heat Mass Transf., vol. 128, pp. 319–334, 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.08.123.
   Web of Science ®Google Scholar
• A. Varakhedkar and R. Senthilkumar, “Flow and heat transfer characteristics of square cylinder with protrusions at different channel confinements,” Int. J. Eng. Adv. Technol., vol. 8, pp. 7–11, 2019. DOI: 10.35940/ijeat.D1002.0484S219.
   Google Scholar
• A. K. Gupta and A. K. Saha, “Suppression of vortex shedding in flow around a square cylinder using control cylinder,” Euro. J. Mech. B Fluids, vol. 76, pp. 276–291, 2019. DOI: 10.1016/j.euromechflu.2019.03.006.
   Web of Science ®Google Scholar
• T. S. Nikhil, A. Varakhedkar, and R. Senthil Kumar, “Flow confinement effect and heat transfer around square cylinder with downstream control cylinders,” J. Therm. Analy. Calor., vol. 1, pp. 1699–1709, 2020. DOI: 10.1007/s10973-020-10396-5.
   Web of Science ®Google Scholar
• A. Honymon, A. Varakhedkar, and R. Senthil Kumar, “Numerical study on flow and heat transfer characteristics of square cylinder with lateral sides extension effect,” J. Therm. Analy. Calor., vol. 1, pp. 685–695, 2020. DOI: 10.1007/s10973-020-10375-w.
   Google Scholar
• H. K. Williamson, “Vortex dynamics in the cylinder wake,” Annu. Rev. Fluid Mech., vol. 28, no. 1, pp. 477–539, 1996. DOI: 10.1146/annurev.fl.28.010196.002401.
   Web of Science ®Google Scholar
• M. Braza, P. Chassaing, and H. H. Minh, “Numerical study and physical analysis of the pressure and velocity fields in the near wake of a circular cylinder,” J. Fluid Mech., vol. 166, pp. 79–130, 1986.
   Google Scholar
• J. R. Culham and Y. S. Muzychka, “Optimization of plate fin heat sinks using entropy generation minimization,” IEEE Trans. Comp. Packag. Technol., vol. 24, no. 2, pp. 159–165, 2001. DOI: 10.1109/6144.926378.
   Google Scholar
• W. A. Khan, J. R. Culham, and M. M. Yovanovich, “The role of fin geometry in heat sinkperformance,” ASME Trans. J. Electron. Pack., vol. 128, no. 4, pp. 324–330, 2006. DOI: 10.1115/1.2351896.
   Web of Science ®Google Scholar
• W. A. Khan, J. R. Culham, and M. M. Yovanovich, “Optimization of pin-fin heat sinks in bypass flow using entropy generation minimization method,” J. Electron. Packag., vol. 130, no. 3, pp. 031010, 2008.
   Web of Science ®Google Scholar
• ANSYS FLUENT Documentation, “Theory Guide and User Guide,” Release 17.1, 2016.
   Google Scholar
• S. Cao, Y. Ge, and Y. Tamura, “Shear effects on flow past a square cylinder at moderate Reynolds numbers,” J. Eng. Mech., vol. 138, pp. 116–123, 2012. DOI: 10.1061/(ASCE)EM.1943-7889.0000309.
   Web of Science ®Google Scholar