Numerical investigation on conjugate behavior of heat transfer and its augmentation in a turbulent wall-jet flow on a heated plate in motion

References

• J. Sengupta, B. G. Thomas and M. A. Wells, “The use of water cooling during the continuous casting of steel and aluminum alloys,” Metall Mat Trans A., vol. 36, no. 1, pp. 187–204, 2005. DOI: 10.1007/s11661-005-0151-y.
   Google Scholar
• Q. Deng, H. Wang, W. He and Z. Feng, “Cooling characteristic of a wall jet for suppressing crossflow effect under conjugate heat transfer condition,” Aerospace., vol. 9, no. 1, pp. 29, 2022. DOI: 10.3390/aerospace9010029.
   Web of Science ®Google Scholar
• J. G. Eriksson, R. I. Karlsson and J. Persson, “An experimental study of a two-dimensional plane turbulent wall jet,” Exp. Fluids, vol. 25, no. 1, pp. 50–60, 1998. DOI: 10.1007/s003480050207.
   Web of Science ®Google Scholar
• V. M. Behera and S. K. Rathore, “Numerical investigation of turbulent offset jet flow over a moving flat plate using low-Reynolds number turbulence model,” J. Therm. Sci. Eng. Appl., vol. 13, no. 5, pp. 1–15, 2021. DOI: 10.1115/1.4049751.
   Web of Science ®Google Scholar
• B. E. Launder and W. Rodi, “The turbulent wall jet,” Prog. Aerosp. Sci., vol. 19, pp. 81–128, 1979. DOI: 10.1016/0376-0421(79)90002-2.
   Web of Science ®Google Scholar
• P. Y. Nizou, “Heat and momentum transfer in a plane turbulent wall jet,” J. Heat Mass Transfer Trans. ASME, vol. 103, no. 1, pp. 138–140, 1981. DOI: 10.1115/1.3244407.
   Web of Science ®Google Scholar
• R. S. AbdulNour, K. Willenborg, J. J. McGrath, J. F. Foss and B. S. AbdulNour, “Measurements of the convection heat transfer coefficient for a planar wall jet: Uniform temperature and uniform heat flux boundary conditions,” Exp. Therm. Fluid Sci., vol. 22, no. 3-4, pp. 123–131, 2000. DOI: 10.1016/S0894-1777(00)00018-2.
   Web of Science ®Google Scholar
• A. Mokni, J. Kechiche, H. Mhiri, G. L. Palec and P. Bournot, “Inlet conditions effects on vertical wall jets in forced and mixed convection regimes,” Int. J Therm. Sci., vol. 48, no. 10, pp. 1884–1893, 2009. DOI: 10.1016/j.ijthermalsci.2009.02.021.
   Web of Science ®Google Scholar
• I. Z. Naqavi, J. C. Tyacke and P. G. Tucker, “A numerical study of a plane wall jet with heat transfer,” Int. J. Heat Fluid Flow., vol. 63, pp. 99–107, 2017. DOI: 10.1016/j.ijheatfluidflow.2016.07.012.
   Web of Science ®Google Scholar
• A. Kumari and A. Kumar, “Heat transfer and fluid flow characteristics of a turbulent wall jet with a wavy wall,” Int. J. Heat Fluid Flow, vol. 87, pp. 108749, 2021. DOI: 10.1016/j.ijheatfluidflow.2020.108749.
   Web of Science ®Google Scholar
• X. W. Zhu, L. Zhu and J. Q. Zhao, “An in-depth analysis of conjugate heat transfer process of impingement jet,” Int. J. Heat Mass Transf., vol. 104, pp. 1259–1267, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.09.075.
   Web of Science ®Google Scholar
• S. K. Rathore, “Study of conjugate heat transfer from heated plate by turbulent offset jet in presence of freestream motion using low-Reynolds number modeling,” JAFM., vol. 12, no. 2, pp. 617–630, 2019. DOI: 10.29252/jafm.12.02.28974.
   Web of Science ®Google Scholar
• P. R. Kanna and M. K. Das, “Conjugate forced convection heat transfer from a flat plate by laminar plane wall jet flow,” Int. J. Heat Mass Transf., vol. 48, no. 14, pp. 2896–2910, 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.01.033.
   Web of Science ®Google Scholar
• A. M. Achari and M. K. Das, “Conjugate heat transfer study of a turbulent slot jet impinging on a moving plate,” Heat Mass Transf., vol. 53, no. 3, pp. 1017–1035, 2017. DOI: 10.1007/s00231-016-1873-7.
   Web of Science ®Google Scholar
• Z. Yang and T. H. Shih, “A new time scale based k-ε model for near wall turbulence,” Am. Inst. Aeronaut. Astronaut. J., vol. 31, no. 7, pp. 1191–1198, 1993. DOI: 10.2514/3.11752.
   Google Scholar
• V. M. Behera and S. K. Rathore, “The effect of plate motion on heat transfer enhancement using turbulent offset jet flow: A conjugate approach,” Int. Commun. Heat Mass Transf., vol. 136, pp. 106173, 2022.106173. DOI: 10.1016/j.icheatmasstransfer.2022.
   Web of Science ®Google Scholar
• E. Vishnuvardhanarao and M. K. Das, “Computational study of heat transfer in a conjugate turbulent wall jet flow at high Reynolds number,” J. Heat Mass Transf. Trans. ASME., vol. 130, pp. 1–7, 2008.
   Web of Science ®Google Scholar
• E. Vishnuvardhanarao and M. K. Das, “Computational study of heat transfer in a conjugate turbulent wall jet flow with constant heat flux,” Int. J. Numer. Methods Heat Fluid Flow., vol. 19, no. 1, pp. 39–52, 2009. DOI: 10.1108/09615530910922143.
   Web of Science ®Google Scholar
• S. C. Godi, A. Pattamatta and C. Balaji, “Heat transfer from a single and row of three dimensional wall jets – A combined experimental and numerical study,” Int. J. Heat Mass Transf., vol. 159, pp. 119801, 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119801.
   Web of Science ®Google Scholar
• G. Biswas and V. Eswaran, Turbulent Flows: Fundamentals, Experiments and Modeling, IIT Kanpur Series of Advanced Texts, New Delhi, Narosa Publishing House, India, 2002.
   Google Scholar
• M. Behnia, S. Parneix and P. Durbin, “Simulation of jet impingement heat transfer with the k‐e‐v2 model,” Center for Turbulence Research, Ann. Res. Briefs, Stanford University, Stanford, CA, 1996, pp. 1–14.
   Google Scholar
• G. Nasif, R. Balachandar and R. M. Barron, “Conjugate analysis of wall conduction effects on the thermal characteristics of impinging jets,” Int. J. Heat Mass Transf., vol. 116, pp. 259–272, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.09.034.
   Web of Science ®Google Scholar
• Y. Jaluria and A. P. Singh, “Temperature distribution in a moving material subjected to surface energy transfer,” Comput. Methods Appl. Mech. Eng., vol. 41, no. 2, pp. 145–157, 1983. DOI: 10.1016/0045-7825(83)90003-8.
   Web of Science ®Google Scholar
• J. Chen, T. Wang and D. A. Zumbrunnen, “Numerical analysis of convective heat transfer from a moving plate cooled by an array of submerged planar jets,” Num. Heat Transf. Part A: Appl., vol. 26, no. 2, pp. 141–160, 1994. DOI: 10.1080/10407789408955985.
   Web of Science ®Google Scholar
• M. N. Ozisik, Heat Conduction, 2nd ed., New York: John Wiley & Sons Inc., 2002.
   Google Scholar
• J. P. Van Doormaal and G. D. Raithby, “Enhancements of SIMPLE method for predicting incompressible fluid flows,” Numer. Heat Transf. Part A., vol. 7, no. 2, pp. 147–163, 1984. DOI: 10.1080/01495728408961817.
   Google Scholar
• H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics. The Finite Volume Method, 2nd ed., Harlow: Pearson Education Limited, 2007.
   Google Scholar
• S. V. Patankar, Numerical Heat Transfer and Fluid Flow, New York: Hemisphere Publishing Corporation, USA, 1980.
   Google Scholar
• J. E. Bardina, P. G. Huang and T. J. Coakley, “Turbulence modeling validation, testing and development,” NASA Tech. Memorandam, Report 110446, pp. 1–100, 1997.
   Google Scholar
• I. Wygnanski, Y. Katz and E. Horev, “On the applicability of various scaling laws to the turbulent wall jet,” J. Fluid Mech., vol. 234, no. 1, pp. 669–690, 1992. DOI: 10.1017/S002211209200096X.
   Web of Science ®Google Scholar
• P. Y. Nizou and T. Tida, “Transferts de chaleur et de quantite de mouvement dans les jets pariktaux plans turbulents,” Int. J. Heat Mass Transf., vol. 38, no. 7, pp. 1187–1200, 1995. DOI: 10.1016/0017-9310(94)00235-N.
   Google Scholar
• A. H. Beitelmal, M. A. Saad and C. D. Patel, “The effect of inclination on the heat transfer between a flat surface and an impinging two-dimensional air jet,” Int. J. Heat Fluid Flow., vol. 21, no. 2, pp. 156–163, 2000. DOI: 10.1016/S0142-727X(99)00080-6.
   Web of Science ®Google Scholar
• J. C. Crittenden, R. R. Trussell, D. W. Hand, K. J. Howe and G. Tchobanoglous, MWH's Water Treatment: Principles and Design, 3rd ed., Hoboken, NJ: John Wiley Sons Inc., 2012, pp. 1861–1862.
   Google Scholar
• F. P. Incropera, D. P. Dewitt, T. L. Bergman and A. S. Lavine, Fundamentals of Heat and Mass Transfer, 6th ed., New Delhi: Wiley & Sons, India, 2009.
   Google Scholar
• T. H. Chilton and A. P. Colburn, “Mass transfer (absorption) coefficients. Prediction from data on heat transfer and fluid friction prediction from,” Ind. Eng. Chem., vol. 26, no. 11, pp. 1183–1187, 1934. DOI: 10.1021/ie50299a012.
   Google Scholar
• C. J. Geankoplis, Transport Process and Unit Operations, 3rd ed., Hoboken, NJ: Prentince Hall International, 1993.
   Google Scholar