A comprehensive analysis of a rectangular microchannel heat sink furnished with a circular perforated cylindrical pinfin

References

• D. B. Tuckerman and R. F. W. Pease, “High-performance heat sinking for VLSI,” IEEE Electron Device Lett., vol. 2, no. 5, pp. 126–129, 1981. DOI: 10.1177/0164027595174002.
   Web of Science ®Google Scholar
• G. D. Xia, J. Jiang, J. Wang, Y. L. Zhai, and D. D. Ma, “Effects of different geometric structures on fluid flow and heat transfer performance in microchannel heat sinks,” Int. J. Heat Mass Transf., vol. 80, pp. 439–447, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.08.095.
   Web of Science ®Google Scholar
• V. R. Kumar, K. Balasubramanian, N. Tiwari, K. Bhatia, and K. K. Kumar, “Numerical investigation of heat transfer enhancement in wavy microchannel with tangential branched secondary channels,” Asia-Pacific J. Chem. Eng., vol. 14, pp. 1–13, 2019. DOI: 10.1002/apj.2325.
   Web of Science ®Google Scholar
• Y. Peng, Z. Li, S. Li, B. Cao, X. Wu, and X. Zhao, “The experimental study of the heat transfer performance of a zigzag-serpentine microchannel heat sink,” Int. J. Therm. Sci., vol. 163, no. January, pp. 106831, 2021. DOI: 10.1016/j.ijthermalsci.2021.106831.
   Google Scholar
• G. Wang, et al., “Experimental and numerical investigation of fractal-tree-like heat exchanger manufactured by 3D printing,” Chem. Eng. Sci., vol. 195, pp. 250–261, 2019. DOI: 10.1016/j.ces.2018.07.021.
   Web of Science ®Google Scholar
• S. S. Hsieh, Y. C. Hsieh, Y. C. Hsu, and C. F. Huang, “Low Reynolds numbers convective heat transfer enhancement in roughened microchannels,” Int. Commun. Heat Mass Transf., vol. 112, pp. 104486, 2020. DOI: 10.1016/j.icheatmasstransfer.2020.104486.
   Web of Science ®Google Scholar
• T. Karayiannis and M. M. Mahmoud, “Flow boiling in microchannels: fundamentals and applications,” Adv. Heat Transf., vol. 49, pp. 157–224, 2017. DOI: 10.1016/bs.aiht.2017.06.001.
   Google Scholar
• R. Mohebbi, M. M. Rashidi, M. Izadi, N. A. C. Sidik, and H. W. Xian, “Forced convection of nanofluids in an extended surfaces channel using lattice Boltzmann method,” Int. J. Heat Mass Transf., vol. 117, pp. 1291–1303, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.10.063.
   Web of Science ®Google Scholar
• C. H. Hoang et al., “Hybrid microchannel/multi-jet two-phase heat sink: a benchmark and geometry optimization study of commercial product,” Int. J. Heat Mass Transf., vol. 169, no. April, pp. 120920, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.120920.
   Google Scholar
• C. H. Hoang et al., “An experimental apparatus for two-phase cooling of high heat flux application using an impinging cold plate and dielectric coolant,” in 36th Annu. Semicond. Therm. Meas. Model. Manag. Symp. SEMI-THERM 2020 Proc, 2020, pp. 32–38. DOI: 10.23919/SEMI-THERM50369.2020.9142831.
   Google Scholar
• A. Jahanbakhshi, A. A. Nadooshan, and M. Bayareh, “Multi-objective optimization of microchannel heatsink with wavy microtube by combining response surface method and genetic algorithm,” Eng. Anal. Bound. Elem., vol. 140, pp. 12–31, 2022. DOI: 10.1016/j.enganabound.2022.04.004.
   Web of Science ®Google Scholar
• S. Rostami, A. A. Nadooshan, A. Raisi, and M. Bayareh, “Numerical assessment of the multi-phase nanofluid flow inside a microchannel during the melting and solidification of PCM in the thermal management of a heatsink,” Eng. Anal. Bound. Elem., vol. 148, pp. 267–278, 2023. DOI: 10.1016/j.enganabound.2022.12.038.
   Web of Science ®Google Scholar
• M. Bayareh, “An overview of non-Newtonian nanofluid flow in macro- and micro-channels using two-phase schemes,” Eng. Anal. Bound. Elem., vol. 148, pp. 165–175, 2023. DOI: 10.1016/j.enganabound.2022.12.033.
   Web of Science ®Google Scholar
• D. Jing and L. He, “Numerical studies on the hydraulic and thermal performances of microchannels with different cross-sectional shapes,” Int. J. Heat Mass Transf., vol. 143, pp. 118604, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.118604.
   Web of Science ®Google Scholar
• L. Shui, B. Huang, F. Gao, and H. Rui, “Experimental and numerical investigation on the flow and heat transfer characteristics in a tree-like branching microchannel,” J. Mech. Sci. Technol., vol. 32, no. 2, pp. 937–946, 2018. DOI: 10.1007/s12206-018-0144-y.
   Web of Science ®Google Scholar
• S. M. Hassani, M. Khoshvaght-Aliabadi, S. H. Mazloumi, S. Rehman, and A. Alimoradi, “Improving thermal performance of microchannels by combining rectangular pin with chamber,” Appl. Therm. Eng., vol. 186, pp. 116373, 2021. DOI: 10.1016/j.applthermaleng.2020.116373.
   Web of Science ®Google Scholar
• H. Xie, B. Yang, S. Zhang, and M. Song, “Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins,” Int. J. Energy Res., vol. 44, no. 4, pp. 3049–3065, 2020. DOI: 10.1002/er.5135.
   Web of Science ®Google Scholar
• H. Tabkhi, A. Nayebzadeh, and Y. Peles, “Experimental and numerical local heat transfer study on micro pin fin with tip clearance,” Appl. Therm. Eng., vol. 179, pp. 115756, 2020. DOI: 10.1016/j.applthermaleng.2020.115756.
   Web of Science ®Google Scholar
• Y. K. Prajapati, “Influence of fin height on heat transfer and fluid flow characteristics of rectangular microchannel heat sink,” Int. J. Heat Mass Transf., vol. 137, pp. 1041–1052, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.04.012.
   Web of Science ®Google Scholar
• S. T. Kadam, R. Kumar, and R. Abiev, “Performance augmentation of single-phase heat transfer in open-type microchannel heat sink,” J. Thermophys. Heat Transf., vol. 33, no. 2, pp. 416–424, 2019. DOI: 10.2514/1.T5522.
   Web of Science ®Google Scholar
• M. Nawaz Khan, M. N. Karimi, M. A. Khan, M. Y. Siddiqui, and T. Rehmaan, “Effect of undercut slots on the overall performance of microchannel heatsink,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1259, no. 1, pp. 012009, 2022. DOI: 10.1088/1757-899X/1259/1/012009.
   Google Scholar
• M. N. Khan and M. N. Karimi, “Analysis of heat transfer enhancement in microchannel by varying the height of pin fins at upstream and downstream region,” J. Process. Mech. Eng., vol. 234, no. 4, pp. 1–10, 2021. DOI: 10.1177/0954408921992975.
   Google Scholar
• M. N. Khan, M. N. Karimi, and M. O. Qidwai, “Effect of circular perforated pin fin on heat transfer and fluid flow characteristics of rectangular microchannel heat sink,” Numer. Heat Transf. Part A Appl., vol. 83, no. 6, pp. 594–608, Aug. 2022. DOI: 10.1080/10407782.2022.2101809.
   Web of Science ®Google Scholar
• A. Al-Damook, N. Kapur, J. L. Summers, and H. M. Thompson, “An experimental and computational investigation of thermal air flows through perforated pin heat sinks,” Appl. Therm. Eng., vol. 89, pp. 365–376, Jul. 2015. DOI: 10.1016/j.applthermaleng.2015.06.036.
   Web of Science ®Google Scholar
• A. Al-Damook, N. Kapur, J. L. Summers, and H. M. Thompson, “Computational design and optimisation of pin fin heat sinks with rectangular perforations,” Appl. Therm. Eng., vol. 105, pp. 691–703, 2016. DOI: 10.1016/j.applthermaleng.2016.03.070.
   Web of Science ®Google Scholar
• A. S. Tijani and N. B. Jaffri, “Thermal analysis of perforated pin-fins heat sink under forced convection condition,” Procedia Manufac., vol. 24, pp. 290–298, 2018. DOI: 10.1016/j.promfg.2018.06.025.
   Google Scholar
• A. Maji, D. Bhanja, P. K. Patowari, and B. Kundu, “Thermal analysis for heat transfer enhancement in perforated pin fins of various shapes with staggered arrays,” Heat Transf. Eng., vol. 40, no. 3-4, pp. 295–319, Feb. 2019. DOI: 10.1080/01457632.2018.1429047.
   Web of Science ®Google Scholar
• V. Choudhary, M. Kumar, and A. K. Patil, “Experimental investigation of enhanced performance of pin fin heat sink with wings,” Appl. Therm. Eng., vol. 155, pp. 546–562, Jun. 2019. DOI: 10.1016/j.applthermaleng.2019.03.139.
   Web of Science ®Google Scholar
• F. Z. Bakhti and M. Si-Ameur, “A comparison of mixed convective heat transfer performance of nanofluids cooled heat sink with circular perforated pin fin,” Appl. Therm. Eng., vol. 159, pp. 113819, Aug. 2019. DOI: 10.1016/j.applthermaleng.2019.113819.
   Web of Science ®Google Scholar
• S. S. Kavita, H. Dhanawade, H. S. Dhanawade, A. Kashikar, S. Matey, and M. Bhadane, “Thermal analysis of circular pinfin with rectangular slot at the center by forced convection,” Int. J. Mech. Ind. Eng., vol. 14, no. 11, pp. 451–459, 2020.
   Google Scholar
• X. Wang, M. Chen, D. Tate, H. Rahimi, and S. Zhang, “Numerical investigation on hydraulic and thermal characteristics of micro latticed pin fin in the heat sink,” Int. J. Heat Mass Transf., vol. 149, pp. 119157, Mar. 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119157.
   Web of Science ®Google Scholar
• A. A. Mohamed and O. Younis, “Performance of drop shaped pin fin heat exchanger with four different fin dimensions,” JMES., vol. 14, no. 2, pp. 6934–6951, Jun. 2020. DOI: 10.15282/jmes.14.2.2020.31.0543.
   Google Scholar
• D. Gupta, P. Saha, and S. Roy, “Computational analysis of perforation effect on the thermo-hydraulic performance of micro pin-fin heat sink,” Int. J. Therm. Sci., vol. 163, no. February, pp. 106857, 2021. DOI: 10.1016/j.ijthermalsci.2021.106857.
   Google Scholar
• M. R. Haque, T. J. Hridi, and M. M. Haque, “CFD studies on thermal performance augmentation of heat sink using perforated twisted, and grooved pin fins,” Int. J. Therm. Sci., vol. 182, pp. 107832, 2022. DOI: 10.1016/j.ijthermalsci.2022.107832.
   Web of Science ®Google Scholar
• M. O. Qidwai and M. M. Hasan, “Effect of variation of cylindrical pin fins height on the overall performance of microchannel heat sink,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., vol. 0, no. 0, pp. 1–11, 2019. DOI: 10.1177/0954408918821777.
   Google Scholar
• V. Yadav, K. Baghel, R. Kumar, and S. T. Kadam, “Numerical investigation of heat transfer in extended surface microchannels,” Int. J. Heat Mass Transf., vol. 93, pp. 612–622, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.10.023.
   Web of Science ®Google Scholar
• G. Xia, L. Chai, M. Zhou, and H. Wang, “Effects of structural parameters on fluid flow and heat transfer in a microchannel with aligned fan-shaped reentrant cavities,” Int. J. Therm. Sci., vol. 50, no. 3, pp. 411–419, 2011. DOI: 10.1016/j.ijthermalsci.2010.08.009.
   Web of Science ®Google Scholar