Thermo-hydraulic analysis of MPCM/green graphene based nanofluids in a minichannel heat sink with comma-shaped pin fins

References

• A. Gupta, “Enhancement of boiling heat transfer in a 5 × 3 tube bundle,” Int. J. Heat Mass Transfer, vol. 48, no. 18, pp. 3763–3772, August 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.03.023.
   Web of Science ®Google Scholar
• M. Gorzin, A. A. Ranjbar and M. J. Hosseini, “Experimental and numerical investigation on thermal and hydraulic performance of novel serpentine minichannel heat sink for liquid CPU cooling,” Energy Rep., vol. 8, pp. 3375–3385, November 2022. DOI: 10.1016/j.egyr.2022.02.179.
   Web of Science ®Google Scholar
• N. Pahlevaninejad, M. Rahimi and M. Gorzin, “Thermal and hydrodynamic analysis of non-Newtonian nanofuid in wavy microchannel,” J. Thermal Anal. Calorim., vol. 143, no. 1, pp. 811–825, January 2021. DOI: 10.1007/s10973-019-09229-x.
   Web of Science ®Google Scholar
• X. F. Peng and B. X. Wang, “Forced convection and flow boiling heat transfer for liquid flowing through microchannels,” Int. J. Heat Mass Transfer, vol. 36, no. 14, pp. 3421–3427, September 1993. DOI: 10.1016/0017-9310(93)90160-8.
   Web of Science ®Google Scholar
• X. F. Peng and G. P. Peterson, “Convective heat transfer and flow friction for water flow in microchannel structures,” Int. J. Heat Mass Transfer, vol. 39, no. 12, pp. 2599–2608, August 1996. DOI: 10.1016/0017-9310(95)00327-4.
   Web of Science ®Google Scholar
• O. B. Ergu, O. N. Sara, S. Yapici and M. E. Arzutug, “Pressure drop and point mass transfer in a rectangular microchannel,” Int. Commun. Heat Mass Transfer, vol. 36, no. 6, pp. 618–623, July 2009. DOI: 10.1016/j.icheatmasstransfer.2009.03.015.
   Web of Science ®Google Scholar
• A. Koyuncuoğlu, R. Jafari, T. Okutucu-Özyurt and H. Külah, “Heat transfer and pressure drop experiments on CMOS compatible microchannel heat sinks for monolithic chip cooling applications,” Int. J. Thermal Sci., vol. 56, pp. 77–85, June 2012. DOI: 10.1016/j.ijthermalsci.2012.01.006.
   Web of Science ®Google Scholar
• Z. H. Wang, et al., “Multi-parameters optimization for microchannel heat sink using inverse problem method,” Int. J. Heat Mass Transfer, vol. 54, no. 13-14, pp. 2811–2819, June 2011. DOI: 10.1016/j.ijheatmasstransfer.2011.01.029.
   Web of Science ®Google Scholar
• G. Xie, F. Zhang, B. Sunden and W. Zhang, “Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow,” Appl. Thermal Eng., vol. 62, no. 2, pp. 791–802, January 2014. DOI: 10.1016/j.applthermaleng.2013.10.042.
   Web of Science ®Google Scholar
• T. M. Harms, et al., “Experimental investigation of heat transfer and pressure drop through deep microchannels in a (110) silicon substarte,” Proc. ASME Heat Transfer Division 1, ASME/HTD, vol. 351, no. 2, pp. 347–357, March 1997. DOI: 10.1115/IMECE1997-0860.
   Google Scholar
• M. Abadi, A. A. Ranjbar, M. Gorzin, R. Bahrampoury and M. J. Hosseini, “Effect of splitter angles and orientations attached to pin fin on heat transfer and hydraulic characteristics in a jet impingement rectangular channel,” Alex. Eng. J., vol. 62, pp. 475–488, January 2023. DOI: 10.1016/j.aej.2022.07.045.
   Google Scholar
• R. Pakrouh, M. J. Hosseini, A. A. Ranjbar and R. Bahrampoury, “A numerical method for PCM-based pin fin heat sinks optimization,” Energy Convers. Manage, vol. 103, pp. 542–552, October 2015. DOI: 10.1016/j.enconman.2015.07.003.
   Web of Science ®Google Scholar
• M. Gorzin, A. A. Ranjbar and M. J. Hosseini, “Experimental study on serpentine minichannel heat sink: effect of rib existence and distance,” Int. J. Thermal Sci., vol. 173, pp. 107397, March 2022. DOI: 10.1016/j.ijthermalsci.2021.107397.
   Web of Science ®Google Scholar
• Z. Soleymani, M. Rahimi, M. Gorzin and Y. Pahamli, “Performance analysis of hotspot using geometrical and operational parameters of a microchannel pin-fin hybrid heat sink,” Int. J. Heat Mass Transfer, vol. 159, pp. 120141, October 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120141.
   Web of Science ®Google Scholar
• M. Turkyilmazoglu, “Stretching/shrinking longitudinal fins of rectangular profile and heat transfer,” Energy Convers. Manage, vol. 91, pp. 199–203, February 2015. DOI: 10.1016/j.enconman.2014.12.007.
   Web of Science ®Google Scholar
• R. Das and K. T. Ooi, “Predicting multiple combination of parameters for designing a porous fin subjected to a given temperature requirement,” Energy Convers. Manage, vol. 66, pp. 211–219, February 2013. DOI: 10.1016/j.enconman.2012.10.019.
   Web of Science ®Google Scholar
• M. K. Chyu, Y. C. Hsing and V. Natarajan, “Convective heat transfer of cubic fin arrays in a narrow channel,” J. Turbomach., vol. 120, no. 2, pp. 362–367, April 1998. DOI: 10.1115/1.2841414.
   Web of Science ®Google Scholar
• W. P. Damerow, J. C. Murtaugh and F. Burgraf, Experimental and Analytical Investigation of the Coolant Flow Characteristics in Cooled Turbine Airfoils, NASA CR. Report, pp. 19720019640, 1972. Available: https://ntrs.nasa.gov/citations/19720019640. Accessed: June 1, 1972.
   Google Scholar
• B. Tiwary, R. Kumar and P. K. Singh, “Thermofluidic characteristic of a nanofluid-cooled oblique fin heat sink: an experimental and numerical investigation,” Int. J. Thermal Sci., vol. 171, pp. 107214, January 2022. DOI: 10.1016/j.ijthermalsci.2021.107214.
   Web of Science ®Google Scholar
• J. Zhou, et al., “Comprehensive evaluation of graphene/R141b nanofluids enhanced heat transfer performance of minichannel heat sinks,” Powder Technol., vol. 397, pp. 116997, January 2022. DOI: 10.1016/j.powtec.2021.11.041.
   Web of Science ®Google Scholar
• S. Y. Jung and H. Park, “Experimental investigation of heat transfer of Al2O3 nanofluid in a microchannel heat sink,” Int. J. Heat Mass Transfer, vol. 179, pp. 121729, November 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121729.
   Web of Science ®Google Scholar
• A. A. Awais and M. H. Kim, “Experimental and numerical study on the performance of a minichannel heat sink with different header geometries using nanofluids,” Appl. Thermal Eng., vol. 171, pp. 115125, May 2020. DOI: 10.1016/j.applthermaleng.2020.115125.
   Web of Science ®Google Scholar
• A. H. Eisapour, et al., “Toward a highly efficient photovoltaic thermal module: energy and exergy analysis,” Renew. Energy, vol. 169, pp. 1351–1372, May 2021. DOI: 10.1016/j.renene.2021.01.110.
   Web of Science ®Google Scholar
• R. Pakrouh, M. J. Hosseini, R. Bahrampoury, A. A. Ranjbar and S. M. Borhani, “Cylindrical battery thermal management based on microencapsulated phase change slurry,” J. Energy Storage, vol. 40, pp. 102602, August 2021. DOI: 10.1016/j.est.2021.102602.
   Web of Science ®Google Scholar
• H. Dai and W. Chen, “Numerical investigation of heat transfer in the double-layered minichannel with microencapsulated phase change suspension,” Int. Commun. Heat Mass Transfer, vol. 119, pp. 104918, December 2020. DOI: 10.1016/j.icheatmasstransfer.2020.104918.
   Web of Science ®Google Scholar
• M. Eisapour, A. H. Eisapour, M. J. Hosseini and P. Talebizadehsardari, “Exergy and energy analysis of wavy tubes photovoltaic-thermal systems using microencapsulated PCM nano-slurry coolant fluid,” Appl. Energy, vol. 266, pp. 114849, May 2020. DOI: 10.1016/j.apenergy.2020.114849.
   Web of Science ®Google Scholar
• R. Sadri, et al., “Study of environmentally friendly and facile functionalization of graphene nanoplatelet and its application in convective heat transfer,” Energy Convers. Manage, vol. 150, pp. 26–36, October 2017. DOI: 10.1016/j.enconman.2017.07.036.
   Web of Science ®Google Scholar
• A. Torbatinezhad, A. A. Ranjbar, M. Rahimi and M. Gorzin, “A new hybrid heatsink design for enhancement of PV cells performance,” Energy Rep., vol. 8, pp. 6764–6778, November 2022. DOI: 10.1016/j.egyr.2022.05.050.
   Web of Science ®Google Scholar
• M. Bahiraei and S. Heshmatian, “A new hybrid heatsink design for enhancement of PV cells performance Thermal performance and second law characteristics of two new microchannel heat sinks operated with hybrid nanofluid containing graphene–silver nanoparticles,” Energy Convers. Manage, vol. 168, pp. 357–370, July 2018. DOI: 10.1016/j.enconman.2018.05.020.
   Web of Science ®Google Scholar
• A. Torbatinezhad, M. Rahimi, A. A. Ranjbar and M. Gorzin, “Performance evaluation of PV cells in HCPV/T system by a jet impingement/mini-channel cooling scheme,” Int. J. Heat Mass Transfer, vol. 178, pp. 121610, October 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121610.
   Web of Science ®Google Scholar
• M. Bahiraei, S. Heshmatian, M. Goodarzi and H. Moayedi, “CFD analysis of employing a novel ecofriendly nanofluid in a miniature pin fin heat sink for cooling of electronic components: effect of different configurations,” Adv. Powder Technol., vol. 30, no. 11, pp. 2503–2516, November 2019. DOI: 10.1016/j.apt.2019.07.029.
   Web of Science ®Google Scholar
• K. Song, T. Tagawa, Z. Chen and Q. Zhang, “Heat transfer characteristics of concave and convex curved vortex generators in the channel of plate heat exchanger under laminar flow,” Int. J. Thermal Sci., vol. 137, pp. 215–228, March 2019. DOI: 10.1016/j.ijthermalsci.2018.11.002.
   Web of Science ®Google Scholar
• E. Hosseinirad, M. Khoshvaqght-Aliabadi and F. Hormozi, “Effects of splitter shape on thermal-hydraulic characteristics of plate-pin-fin heat sink (PPFHS),” Int. J. Heat Mass Transfer, vol. 143, pp. 118586, August 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.118586.
   Web of Science ®Google Scholar
• P. Bhandari and Y. K. Prajapati, “Thermal performance of open microchannel heat sink with variable pin fin height,” Int. J. Thermal Sci., vol. 159, pp. 106609, September2021. DOI: 10.1016/j.ijthermalsci.2020.106609.
   Web of Science ®Google Scholar
• A. Ebrahimi, F. Rikhtegar, A. Sabaghan and E. Roohi, “Heat transfer and entropy generation in a microchannel with longitudinal vortex generators using nanofluids,” Energy, vol. 101, pp. 190–201, January 2016. DOI: 10.1016/j.energy.2016.01.102.
   Web of Science ®Google Scholar
• E. Hosseinirad, M. Khoshvaght-Aliabadi and F. Hormozi, “Evaluation of heat transfer and pressure drop in a mini-channel using transverse rectangular vortex-generators with various non-uniform heights,” Appl. Thermal Eng., vol. 161, pp. 114196, October 2019. DOI: 10.1016/j.applthermaleng.2019.114196.
   Web of Science ®Google Scholar