NUMERICAL SIMULATION OF FLUID FLOW AND HEAT TRANSFER IN A SINGLE-SCREW EXTRUDER FOR NON-NEWTONIAN FLUIDS

REFERENCES

• Z. , Tadmor and C. Gogos , Principles of Polymer Processing , John Wiley & Sons , New York , 1979 .
   Google Scholar
• R. T. Fenner , Principles of Polymer Processing , Chemical Publishing , New York , 1980 .
   Google Scholar
• Z. Tadmor and I. Klein , Engineering Principles of Plasticating Extrusion , Kleiger Publishing , Huntington , 1978 .
   Google Scholar
• R. M. Griffith , Fully Developed Flow in Screw Extruders , Ind. Eng. Chem. Fundam. , vol. 1 , no. 3 , pp. 181 – 187 , 1962 .
   Web of Science ®Google Scholar
• H. J. Zamodits and J. R. A. Pearson , Flow of Polymer Melts in Extruders , Part i, The Effect of Transverse Flow and of a Superposed Steady Temperature Profile , Trans. Soc. Rheol. , vol. 13 , no. 3 , pp. 357 – 385 , 1969 .
   Google Scholar
• C. Rauwendaal , Throughput-Pressure Relationship for Power-Law Fluids in Single-Screw Extruder , SPE Tech. Pap. , vol. 31 , pp. 30 – 33 , 1985 .
   Google Scholar
• H. Lappe and H. Potente , Investigations into the Throughput Behavior of Conventional Single-Screw Machines , SPE Tech. Pap. , vol. 29 , pp. 174 – 177 , 1983 .
   Google Scholar
• G. Lidor and Z. Tadmor , Theoretical Analysis of Residence Time Distribution Functions and Strain Distribution Functions in Plasticating Screw Extruders , Polymer Eng. Sci. , vol. 16 , pp. 450 – 462 , 1976 .
   Web of Science ®Google Scholar
• D. M. Bigg and S. Middleman , Mixing in a Screw Extruder, Model for Residence Time Distribution and Strain , Ind. Eng. Chem. Fundam. , vol. 13 , pp. 66 – 71 , 1974 .
   Web of Science ®Google Scholar
• R. T. Fenner , The Design of Large Hot Melt Extruders , Conference on Engineering Design of Plastics Processing Machinery , Univ. of Bradford , England , April 1974 .
   Google Scholar
• R. T. Fenner , Developments in the Analysis of Steady Screw Extrusion of Polymers , Polymer , vol. 18 , pp. 617 – 635 , 1977 .
   Web of Science ®Google Scholar
• B. Elbirti and J. T. Lindt , A Note on the Numerical Treatment of the Thermally Developing Flow in Screw , Polymer Eng. Sci. , vol. 24 , no. 7 , pp. 482 – 487 , May 1984 .
   Web of Science ®Google Scholar
• E. E. Agur and J. Vlachopoulos , Numerical Simulation of Single-Screw Plasticating Extruder , Polymer Eng. Sci. , vol. 22 , no. 17 , pp. 1084 – 1094 , 1982 .
   Web of Science ®Google Scholar
• F. Mokhtarian and L. Erwin , Computer Analysis of Mixing in Single-Screw Extruders , SPE Tech. Pap. , vol. 28 , pp. 476 – 479 , 1982 .
   Google Scholar
• S. Bruin , D. J. Van Zuilichem, and W. Stolp , A Review of Fundamental and Engineering Aspects of Extrusion of Biopolymers in a Single-Screw Extruder , J. Food Process Eng. , vol. 2 , pp. 1 – 37 , 1978 .
   Google Scholar
• J. Harper , Food Extrusion , CRC Press , New York , 1980 .
   Google Scholar
• I. O. Mohamed and R. G. Morgan , Average Heat Transfer Coefficients in Single-Screw Extruders of Non-Newtonian Food Materials , Fundamentals of Food Extrusion and Forming Symposium , AlChE, Summer National Meeting , Boston , Mass. , 1986 .
   Google Scholar
• H. Schlichting , Boundary Layer Theory , McGraw-Hill , New York , 1979 .
   Google Scholar
• M. V. Karwe and Y. Jaluria , Thermal Transport from a Heated Moving Surface , Trans. ASME, J. Heat Transfer , vol. 108 , pp. 728 – 734 , 1986 .
   Web of Science ®Google Scholar
• Y. Jaluria and K. E. Torrance , Computational Heat Transfer , Hemisphere , Washington , D.C. , 1986 .
   Google Scholar