REFERENCES
- G. P. Peterson and A. Ortega , Thermal Control of Electronic Equipment and Devices , Adv. Heat Transfer , vol. 20 , pp. 181 – 314 , 1990 .
- A. Bejan , Convection Heat Transfer , Wiley , New York , p. 157 , chapter 4, problem 11 , 1984 .
- A. Bar-Cohen and W. M. Rohsenow , Thermally Optimum Spacing of Vertical, Natural Convection Cooled, Parallel Plates , J. Heat Transfer , vol. 106 , pp. 116 – 123 , 1984 .
- S. H. Kim , N. K. Anand , and L. S. Fletcher , Free Convection between Series of Vertical Parallel Plates with Embedded Line Heat Sources , J. Heat Transfer , vol. 113 , pp. 108 – 115 , 1991 .
- N. K. Anand , S. H. Kim , and L. S. Fletcher , The Effect of Plate Spacing on Free Convection between Heated Parallel Plates , J. Heat Transfer , vol. 114 , pp. 515 – 518 , 1992 .
- R. C. Schmidt and S. V. Patankar , A Numerical Study of Laminar Forced Convection across Heated Rectangular Blocks in Two-Dimensional Ducts , ASME Paper 86-WA/HT-88 , 1986 .
- J. Davalath and Y. Bayazitoglu , Forced Convection Cooling across Rectangular Blocks , J. Heat Transfer , vol. 109 , pp. 321 – 328 , 1987 .
- D. B. Tuckerman and R. F. W. Pease , High-Performance Heat Sinking for VLSI , IEEE Electron. Device Lett. , vol. EDL-2 , pp. 126 – 129 , 1981 .
- R. W. Knight , J. S. Goodling , and D. J. Hall , Optimal Thermal Design of Forced Convection Heat Sinks—Analytical , J. Electron. Packaging , vol. 113 , pp. 313 – 321 , 1991 .
- A. Bejan and E. Sciubba , The Optimal Spacing of Parallel Plates Cooled by Forced Convection , Int. J. Heat Mass Transfer , vol. 35 , pp. 3259 – 3264 , 1992 .
- J. J. Lee , K. V. Liu , K. T. Yang , and M. D. Kelleher , Laminar Natural Convection in a Rectangular Enclosure due to a Heated Protrusion of One Vertical Wall—Part II Numerical Simulations , in P. J. Marto and I. Tanasawa (eds.) , Proc. Second ASME-JSME Thermal Eng. Joint Conf. , vol. 2 , pp. 179 – 185 , 1987 .
- X. Wang , L. Robillard , and P. Vasseur , Laminar Mixed Convection Heat Transfer between Parallel Plates with Periodically Localized Heat Sources , ASME HTD , vol. 171 , pp. 81 – 87 , 1991 .
- Fluid Dynamics International , FIDAP Theoretical Manual , vol. 6.03 , Evanston, Illinois, 1991 .
- C. A. J. Fletcher , Computations Techniques for Fluid Dynamics , vol. 2 , Specific Techniques for Different Flow Categories , pp. 366 – 368 , Springer Verlag , New York , 1987 .
- National Instruments , IEEE-488 and V X I Bus Control, Data Acquisition and Analysis , 1992 .
- A. Bejan , Heat Transfer , Wiley , New York , p. 328 , 1993 .
- S. Bhattacharjee and W. L. Grosshandler , The Formation of a Wall Jet Near a High Temperature Wall Under Microgravity Environment , ASME HTD vol. 96 , pp. 711 – 716 , 1988 .
- R. K. Shah and A. L. London , Laminar Flow Forced Convection in Ducts , Academic Press , New York , 1978 .
- A. Bejan , A. M. Morega , S. W. Lee , and S. J. Kim , The Cooling of a Heat Generating Board inside a Parallel Plate Channel , Int. J. Heat Fluid Flow , vol. 14 , pp. 170 – 176 , 1993 .
- S. Mereu , E. Sciubba , and A. Bejan , The Optimal Cooling of a Stack of Heat Generating Boards with Fixed Pressure Drop, Flowrate or Pumping Power , Int. J. Heat Mass Transfer , pp. 3677 – 3686 , vol. 36 , 1993 .
- A BejanAl. M. Morega , The Optimal Spacing of a Stack of Plates Cooled by Turbulent Forced Convection , Int. J. Heat Mass Transfer , vol. 37 , 1994 , in press .