NUMERICAL COUPLING OF MULTIPLE-REGION SIMULATIONS TO STUDY TRANSPORT IN A TWIN-SCREW EXTRUDER

REFERENCES

• Z. Tadmor and C. Gogos , Principles of Polymer Processing , John Wiley , New York , 1979 .
   Google Scholar
• R. T. Fenner , Principles of Polymer Processing , Chemical Publishing , New York , 1979 .
   Google Scholar
• Z. Tadmor and I. Klein , Engineering Principles of Ptasticating Extrusion , Kleiger Publishing , Huntington , 1978 .
   Google Scholar
• C. Rauwendaal , Polymer Extrusion , Hanser Publishers , New York , 1990 .
   Google Scholar
• F. G. Martelli , Twin–Screw Extruders , Van Nostrand Rheinhold , New York , 1983 .
   Google Scholar
• K. Eise , H. Herrmann , H. Werner , and U. Burkhardt , An Analysis of Twin–Screw Extruder Mechanisms , Adv. Plast. Technol. , vol. 1 , no. 2 , pp. 1 – 22 , 1981 .
   Google Scholar
• J. M. Smith , L. P. B. M. Janssen , W. L. De Koning , and P. P. J. Abeln , The Operating Characteristic of Twin Screw Extruders , Polym. Eng. Sci. , vol. 18 , pp. 660 – 667 , 1978 .
   Google Scholar
• J. L. White , Twin Screw Extrusion , Hanser Publishers , New York , 1991 .
   Google Scholar
• L. P. B. M. Janssen , Twin Screw Extrusion , Elsevier , New York , 1978 .
   Google Scholar
• J. L. White , W. Szydlowski , K. Min , and M. H. Kim , Twin–Screw Extruders Development of Technology and Analysis of Flow , Adv. Polym. Technol. , vol. 7 , pp. 295 – 332 , 1987 .
   Google Scholar
• R. M Secor , A Mass Transfer Model for a Twin–Screw Extruder , Polym. Eng. Sci. , vol. 26 , pp. 647 – 652 , 1986 .
   Google Scholar
• D. Bigio and S. Zerafati , A Numerical Procedure for Evaluation of Mixing in the Nip Region of a Non–1 ntermeshing, Counter–Rotating Twin Screw Extruder , SPE ANTEC Technol. Pap. , vol. 34 , pp. 85 – 88 , 1988 .
   Google Scholar
• K. Nguyen and J. Lindt , Finite Element Modeling of a Counter–Rotating, Tangential (CRT) Twin Screw Extruders , SPE ANTEC Technol. Pap. , vol. 34 , pp. 93 – 95 , 1988 .
   Google Scholar
• M. K. Kulshreshtha , C. A. Zaror , D. J. Jukes , and D. L. Pyle , A Generalized Steady State Model for Twin Screw Extruders , Trans. Inst. Chem. Eng. , vol. 69 , part C, pp. 189 – 199 , 1991 .
   Google Scholar
• D. J. van Zuilichem , E. van der Laan , W. Stolp , and K. van’tRiet , Modeling of Heat Transfer in a Corotating Twin–Screw Food Extruder, in J. L. Kokini, C.–T. Ho and M. V. Karwe, eds. , Food Extrusion Science and Technology , pp. 149 – 164 , Marcel Dekker , New York , 1992 .
   Google Scholar
• J. Tayeb , G. Delia Valle , C. Barres , and B. Vergnes , Simulation of Transport Phenomena in Twin–Screw Extruders, in J. L. Kokini, C.–T. Ho and M. V. Karwe, eds. , Food Extrusion Science and Technology , pp. 41 – 70 , Marcel Dekker , New York , 1992 .
   Google Scholar
• R. T. Fenner , Developments in the Analysis of Steady Screw Extrusion of Polymers , Polymer , vol. 18 , pp. 617 – 635 , 1977 .
   Web of Science ®Google Scholar
• B. Elbirli and J. T. Lindt , A Note on the Numerical Treatment of the Thermally Developing How in Screw Extruders , Polymer Eng. Sci. , vol. 24 , no. 7 , pp. 482 – 487 , 1984 .
   Web of Science ®Google Scholar
• E. E. Agur and J. Vlachopoulos , Numerical Simulation of Single–Screw Plasticating Extruder , Potym. Eng. Sci. , vol. 22 , no. 17 , pp. 1084 – 1094 , 1982 .
   Web of Science ®Google Scholar
• M. V. Karwe and Y. Jaluria , Numerical Simulation of Fluid Flow and Heat Transfer in a Single Screw Extruder for Non–Newtonian Fluids , Numer. Heat Transfer, Part A , vol. 17 , pp. 167 – 190 , 1990 .
   Web of Science ®Google Scholar
• S. Gopalakrishna , Y. Jaluria , and M. V. Karwe , Heat and Mass Transfer in a Single–Screw Extruder for Non–Newtonian Materials , Int. J. Heat Mass Transfer , vol. 35 , no. 1 , pp. 221 – 237 , 1992 .
   Web of Science ®Google Scholar
• T. Sastrohartono and T. H. Kwon , Finite Element Analysis of Mixing Phenomena in Tangential Twin–Screw Extruders for Non–Newtonian Fluids, in E. G. Thompson et al., eds. , Proceedings, NUMIFORM 89, Numerical Methods in Industrial Forming Processes , pp. 277 – 284 , A. A. Balkema , Rotterdam , 1989 .
   Google Scholar
• T. Sastrohartono , Finite Element Analyses of Transport Processes in Single and Twin Screw Extruders , Ph.D. thesis , Rutgers University , New Brunswick , N.J. , 1992 .
   Google Scholar
• T. Sastrohartono , M. Esseghir , T. H. Kwon , and V. Sernas , Numerical and Experimental Studies of the Flow in the Nip Region of a Partially Intermeshing Co–Rotating Twin–Screw Extruder , Pofym. Eng. Sci. , vol. 30 , pp. 1382 – 1398 , 1990 .
   Google Scholar
• T. H. Kwon , T. Sastrohartono , and Y. Jaluria , Finite Element Simulation of Mixing Phenomena in the Intermeshing Zone of a Twin–Screw Extruder for Non–Newtonian Fluids, in H. Niki and M. Kawahara, eds. , Proceedings, Computational Methods in Flow Analysis , vol. 1 , pp. 635 – 642 , Okayama University of Science , Okayama , Japan , 1988 .
   Google Scholar
• T. H. Kwon , Y. Jaluria , M. V. Karwe , and T. Sastrohartono , Numerical Simulation of the Transport Processes in a Twin–Screw Polymer Extruder, in A. I. Isayev, ed. , Modeling of Polymer Processing , pp. 77 – 115 , Hanser Publications , Munich , 1991 .
   Google Scholar