REFERENCES
- M. Cross, K. Pericleous, T. N. Croft, D. McBride, J. A. Lawrence, and A. J. Williams Computational Modeling of Mould Filling and Related Free-Surface Flows in Shape Casting: An Overview of the Challenges Involved, Metall. Mater. Trans. B, vol. 37, pp. 879–885, 2006.
- C. W. Hirth and B. D. Nichols Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries, J. Comput Phys., vol. 39, pp. 201–225, 1981.
- A. S. Usmani, J. T. Cross, and R. W. Lewis A Finite Element Model for the Simulations of Mould Filling in Metal Casting and Assosiated Heat Transfer, Int. J. Numer. Meth. Eng., vol. 35, pp. 787–806, 1992.
- R. W. Lewis, A. S. Usmani, and J. T. Cross Efficient Mould Filling in Casting by Explicit Finite Element Method, Int. J. Numer. Meth. Fluids, vol. 20, pp. 493–506, 1995.
- C. W. Chen, C. R. Li, T. H.Han, C. T.Shei, W. S. Hwang, and C. M. Houng Numerical Simulation of Filling Pattern for an Industrial Die Casting and Its Comparison with Defects Distribution of an Actual Casting, Ave. Foundary Soc. Trans., pp. 139–146, 1994.
- X. Xue, S. F. Hansen, and P. N. Hansen Numerical Simulation and Experimental Verification of Mould Filling Processes through a Less-Depressurised Gating Systems, Ave. Foundary Soc. Trans., pp. 549–558, 1993.
- J. L. Yeh, S. H. Jong, and W. S. Hwang Improved 3D Mould Filling Model for Complex Castings and Experimental Verification, Ave. Foundary Soc. Trans., pp. 1055–1063, 1993.
- K. Keerthiprasad, M. Murali, P. Mukunda, and S. Majumdar Numerical Simulation and Cold Modeling Experiments on Centrifugal Casting, Metall. Mater. Trans. B, vol. 42, pp. 144–155, 2011.
- D. McBride, T. N. Croft, and M. Cross A Coupled Finite Volume Method for the Computational Modelling of Mould Filling in Very Complex Geometries, Comput. Fluids, vol. 37, pp. 170–180, 2008.
- S. Muzaferija and M. Perić Computation of Free-Surface Flows Using Finite Volume Method and Moving Grids, Numer. Heat Transfer B, vol. 32, pp. 369–384, 1997.
- J. E. Lee, T. J. Yeo, K. H. Oh, J. K. Yoon, and U. S. Yoon Prediction of Cracks in Continuously Cast Steel Beam Blank through Fully Coupled Analysis of Fluid Flow, Heat Transfer and Deformation Behaviour of a Solidifying Shell, Metall. Trans. A, vol. 31A, pp. 225–237, 2000.
- G. Beckett, J. A. MacKenzie, and M. L. Robertson A Moving Mesh Finite Element Method for the Solution of Two-Dimensional Stefan Problems, J. Comput. Phys., vol. 168, pp. 500–518, 2001.
- D. J. Browne and J. D. Hunt A Fixed Grid Front-Tracking Model of the Growth of a Columnar Front and an Equiaxed Grain during Solidification of an Alloy, Numer. Heat Transfer B, vol. 45, pp. 395–419, 2004.
- D. M. Cristopher Comparison of Interface-Following Techniques for Numerical Analysis of Phase-Change Problems, Numer. Heat Transfer B, vol. 39, pp. 189–206, 2001.
- K. Morgan, R. W. Lewis, and O. C. Zienkiewicz An Improved Algorithm for Heat Conduction Problems with Phase Change, Int. J. Numer. Meth. Eng., vol. 22B, pp. 651–664, 1992.
- M. R. Barkhudarov and C. W. Hirt Casting Simulation: Mold Filling and Solidification – Benchmark Calculation Using FLOW-3D, in M. Cross and J. Campbell (eds.), Modeling of Casting, Welding and Advanced Solidification Process VII, The Minerals Metals and Materials Society, 1995, pp. 935–946.
- A. Alexandrou, F. Bardinet, and W. Loue Mathematical and Computational Modeling of Die Filling in Semisolid Metal Processing, J. Mater. Process. Technol., vol. 96, pp. 59–72, 1999.
- A. Alexandrou, E. Duc, and V. Entov Inertial, Viscous and Yield Stress Effects in Bingham Fluid Filling of a 2D Cavity, J. Non-Newtonian Fluid Mech., vol. 96, pp. 383–403, 2001.
- I. Wintruff, C. Gunther, and A. G. Class An Interface-Tracking Control-Volume Finite-Element Method for Melting and Solidification Problems‒Part I: Formulation, Numer. Heat Transfer B, vol. 39, pp. 101–125, 2001.
- N. Hannoun, V. Alexiades, and T. Z. Mai Resolving of the Controversy over Tin and Gallium Melting in a Rectangular Cavity Heated from the Side, Numer. Heat Transfer B, vol. 44, pp. 253–276, 2003.
- S. Jana, S. Ray, and F. Durst A Numerical Method to Compute Solidification and Melting Processes, Appl. Math. Modell., vol. 31, pp. 93–119, 2007.
- H. Wang, G. Djambazov, K. A. Pericelous, R. A. Harding, and M. Wickins Numerical Modelling of Tilt Casting Process for γ-TiAl Alloys, Int. J. Cast Metals Res., vol. 25, pp. 65–74, 2012.
- S. Jana, O. Kättlitz, F. Hediger, J. Jakumeit, and J. Aguilar Predictions of Misruns Using Three-Phase Coupled Mold-Filling, and Solidification Simulations in Low Pressure Turbine (lpt) Blades, IOP Conf. Ser.: Mater. Sci. Eng., vol. 33, 012007, 2012.
- M. Bellet, M. Menai, F. Bay, P. Schmidt, and I. L. Svensson Finite Element Modeling of the Cooling Phase in Casting Processes, in T. S. Piwonka V. Voller, and L. Katgerman (eds.), Modeling of Casting, Welding and Advanced Solidification Process VI, The Minerals, Metals and Materials Society, 1993, pp. 561–568.
- R. W. Lewis, K. N. Seetharamu, and A. Y. Hassan Residual Stress Formation during Casting, in G. Totten, M. Howes, and T. Inoue (eds.), Handbook of Residual Stress and Deformation of Steel, The Materials Information Society, 2002, pp. 361–371.
- R. Y. Chang and W. H. Yang Numerical Simulation of Mould Filling in Injection Molding Using a Three-Dimensional Finite Volume Approach, Int. J. Numer. Meth. Fluids, vol. 37, pp. 125–148, 2001.
- A. A. Samarskii, P. N. Vabishchevich, O. P. Iliev, and A. G. Chubranov Numerical Simulation of Convection/Diffusion Phase Change Problems‒A Review, Int. J. Heat Mass Transfer, vol. 36, pp. 4095–4106, 1993.
- H. Hu and S. A. Argiropoulos Mathematical Modelling of Solidification and Melting: A Review, Modell. Simul. Mater. Sci. Eng., vol. 4, pp. 371–396, 1996.
- V. R. Voler An Overview of Numerical Methods for Solving Phase Change Problems, in W. J. Minkowycz and E. M. Sparrow (eds.), Advances in Numerical Heat Transfer, Taylor & Francis chap. 9, 1997.
- C. Bailey, P. Chow, M. Cross, Y. Freyer, and K. Pericleous Multiphysics Modelling of the Metals Casting Process, Proc. R. Soc. Lond. A, vol. 452, pp. 459–486, 1996.
- J.-E. Lee, H. N. Hun, K. H. Oh, and J.-K. Yoon, A Fully Coupled Analysis of Fluid Flow Heat Transfer and Stress in Continuous Round Billet Casting, ISIJ Int., vol. 39, pp. 435–444, 1999.
- D. Y. Ju Residual Stress Formation during Casting: Continuous and Centrifugal Casting Processes, in G. Totten, M. Howes, and T. Inoue (eds.), Handbook of Residual Stress and Deformation of Steel, The Materials Information Society, 2002, pp. 372–390.
- B. G. Thomas Stress Modeling of Casting Processes: An Overview, in T. S. Piwonka, V. Voller, and L. Katgerman (eds.), Modeling of Casting, Welding and Advanced Solidification Process VI, The Minerals, Metals and Materials Society, 1993, pp. 519–534.
- A. Teskeredžić, I. Demirdžić, and S. Muzaferija, Numerical Method for Heat Transfer, Fluid Flow and Stress Analysis in Phase-Change Problems, Numer. Heat Transfer B, vol. 42, pp. 437–459, 2002.
- A. Teskeredžić Application of the Finite Volume Method to Casting Problems, Ph.D. thesis, University of Sarajevo, 2004.
- I. Demirdžić, S. Muzaferija, and M. Perić, Advances in Computation of Heat Transfer, Fluid Flow and Solid Body Deformation Using Finite Volume Approaches, in W. J. Minkowycz and E. M. Sparrow (eds.), Advances in Numericla Heat Transfer, Taylor & Francis, 1997, pp. 59–96.
- I. Demirdžić and M. Perić Space Conservation Law in Finite Volume Calculations of Fluid Flow, Int. J. Numer. Meth. Fluids, vol. 8, pp. 1037–1050, 1988.
- I. Demirdžić, and S. Muzaferija, Numerical Method for Coupled Fluid Flow Heat Transfer and Stress Analysis Using Unstructured Moving Meshes with Cells of Arbitrary Topology, Comput. Meth. Appl. Mech. Eng., vol. 125, pp. 235–255, 1995.
- S. Muzaferija and M. Perić Computation of Free Surface Flows Using Interface-Tracking and Interface-Capturing Methods, in O. Mahrenholtz and M. Markiewicz (eds.), Nonlinear Water Wave Interaction, Computational Mechanics Publications, Southhampton, U.K, 1998, pp. 59–96.
- P. K. Khosla and S. G. Rubin A Diagonally Dominant Second-Order Accurate Implicit Scheme, Comput. Fluids, vol. 2, pp. 207–209, 1974.
- A. Teskeredžić, I. Demirdžić, and S. Muzaferija Numerical Method for Calculation of Complete Casting Process – Part II: Validation and Application, Numer. Heat Transfer B, vol. xx, pp. pp1–pp2, 2015.