Inverse shape design for heat conduction problems via the ball spine algorithm

References

• S. Bigham, H. Shokouhmand, R. N. Isfahani, and S. Yazdan, Fluid Flow, and Heat Transfer Simulation in a Constricted Microchannel: Effects of Rarefaction, Geometry, and Viscous Dissipation, Numer. Heat Transfer A, vol. 59, pp. 209–230, 2011.
   Web of Science ®Google Scholar
• H. Shokouhmand and S. Bigham, Slip-Flow and Heat Transfer of Gaseous Flows in the Entrance of a Wavy Microchannel, Int. Commun. Heat Mass Transfer, vol. 37, pp. 695–702, 2010.
   Web of Science ®Google Scholar
• C. H. Huang and Y. L. Chung, A Nonlinear Fin Design Problem in Estimating the Optimal Shapes of Longitudinal and Spine Fully Wet Fins, Numer. Heat Transfer A, vol. 57, pp. 749–776, 2010.
   Web of Science ®Google Scholar
• C. H. Huang and Y. L. Chung, An Inverse Design Problem of Estimating the Optimal Shape of Annular Fins Adhered to a Bare Tube of an Evaporator, Numer. Heat Transfer A, vol. 66, pp. 1195–1217, 2014.
   Web of Science ®Google Scholar
• C. H. Huang and Y. L. Chung, An Inverse Design Problem in Determining the Optimum Shape of Spine and Longitudinal Fins, Numer. Heat Transfer A, vol. 43, pp. 155–177, 2003.
   Web of Science ®Google Scholar
• P. Li and K. Y. Kim, Multiobjective Optimization of Staggered Elliptical Pin-Fin Arrays, Numer. Heat Transfer A, vol. 53, pp. 418–431, 2008.
   Web of Science ®Google Scholar
• Y. P. Cheng, Z. G. Qu, W. Q. Tao, and Y. L. He, Numerical Design of Efficient Slotted Fin Surface Based on the Field Synergy Principle, Numer. Heat Transfer A, vol. 45, pp. 517–538, 2004.
   Web of Science ®Google Scholar
• J. D. Stanitz, A Review of Certain Inverse Methods for the Design of Ducts with 2 or 3-Dimensional Potential Flow, Appl. Mech. Rev., vol. 41, pp. 217–238, 1988.
   Google Scholar
• C. D. Nelson and T. Yang, Design of Branched and Unbranched Axially Symmetrical Ducts with Specified Pressure Distribution, AIAA J., vol. 15, pp. 1272–1277, 1977.
   Google Scholar
• P. Chaviaropoulos, V. Dedoussis, and K. D. Papailion, On the 3-D Inverse Potential Target Pressure Problem. Part I: Theoritical Aspects and Method Formulation, J. Fluid Mech., vol. 282, pp. 131–146, 1995.
   Web of Science ®Google Scholar
• P. Chaviaropoulos, V. Dedoussis, and K. D. Papailion, On the 3-D Inverse Potential Target Pressure Problem. Part II: Numerical Aspects and Application to Duct Design, J. Fluid Mech., vol. 282, pp. 147–162, 1995.
   Web of Science ®Google Scholar
• L. Zannetti, A Natural Formulation for the Solution of Two–Dimensional or Axis–Symmetric Inverse Problems, Int. J. Numer. Meth. Eng., vol. 22, pp. 451–463, 1986.
   Web of Science ®Google Scholar
• A. Ashrafizadeh, G. D. Raithby, and G. D. Stubley, Direct Design of Shape, Numer. Heat Transfer B, vol. 41, pp. 501–520, 2002.
   Web of Science ®Google Scholar
• M. Taiebi-Rahni, F. Ghadak, and A. Ashrafizadeh, A Direct Design Approach Using the Euler Equation, Inverse Prob. Sci. Eng., vol. 16, pp. 217–231, 2008.
   Web of Science ®Google Scholar
• J. E. Borges, Computational Method for the Design of Ducts, Computers & Fluids, vol. 36, pp. 480–483, 2007.
   Web of Science ®Google Scholar
• L. Gosselin, M. Tye-Gingras, and F. Mathieu-Potvin, Review of Utilization of Genetic Algorithms in Heat Transfer Problems, Int. J. Heat Mass Transfer, vol. 52, pp. 2169–2188, 2009.
   Web of Science ®Google Scholar
• C. H. Huang and S. P Wang, A Three-Dimensional Inverse Heat Conduction Problem in Estimating Surface Heat Flux by Conjugate Gradient Method, Int. J. Heat Mass Transfer, vol. 42, pp. 3387–3403, 1999.
   Web of Science ®Google Scholar
• C. H. Cheng and C. Y. Wu, An Approach Combining Body Fitted Grid Generation and Conjugate Gradient Methods for Shape Design in Heat Conduction Problems, Numer. Heat Transfer B, vol. 37, pp. 69–83, 2000.
   Web of Science ®Google Scholar
• C. H. Lan, C. H Cheng, and C. Y. Wu, Shape Design for Heat Conduction Problems Using Curvilinear Grid Generation Conjugate Method and Redistribution Method, Numer. Heat Transfer B, vol. 41, pp. 487–510, 2001.
   Google Scholar
• J. Zhou, Y. Zhang, J. K. Chen, and Z. C. Feng, Inverse Estimation of Surface Heating Condition in a Three-Dimensional Object Using Conjugate Gradient Method, Int. J. Heat Mass Transfer, vol. 53, pp. 2643–2654, 2010.
   Web of Science ®Google Scholar
• C. Huang and C. Lee, An Inverse Problem to Estimate Simultaneously Six Internal Heat Fluxes for a Square Combustion Chamber, Int. J. Thermal Sci., vol. 88, pp. 59–76, 2015.
   Web of Science ®Google Scholar
• C. H. Huang and W. C Chen, A Three-Dimensional Inverse Forced Convection Problem in Estimating Surface Heat Flux by Conjugate Gradient Method, Int. J. Heat Mass Transfer, vol. 43, pp. 3171–3181, 2000.
   Web of Science ®Google Scholar
• C. H Cheng and M. H Chang, Shape Design for a Cylinder with Uniform Temperature Distribution on the Outer Surface by Inverse Heat Transfer Method, Int. J. Heat Mass Transfer, vol. 46, pp. 2643–2654, 2003.
   Web of Science ®Google Scholar
• E. Katamine, Y. Kawase, and H. Azegami, Shape Optimization of Thermal Forced Convection Fields, Heat Transfer–Asian Res., vol. 37, pp. 313–328, 2008.
   Google Scholar
• H. M. Park and O. Y. Chung, An Inverse Natural Convection Problem of Estimating the Strength of a Heat Source, Int. J. Heat Mass Transfer, vol. 42, pp. 4259–4273, 1999.
   Web of Science ®Google Scholar
• M. Prud'homme and T. Hung Nguyen, Solution of Inverse Free Convection Problems by Conjugate Gradient Method: Effects of Rayleigh Number, Int. J. Heat Mass Transfer, vol. 44, pp. 2011–2027, 2001.
   Web of Science ®Google Scholar
• H. M. Park and H. J. Shin, Shape Identification for Natural Convection Problems Using the Adjoint Variable Method, J. Comput. Phys., vol. 186, pp. 198–211, 2003.
   Web of Science ®Google Scholar
• H. M. Park and T. Y. Yoon, Solution of the Inverse Radiation Problem Using a Conjugate Gradient Method, Int. J. Heat Mass Transfer, vol. 43, pp. 1767–1776, 2000.
   Web of Science ®Google Scholar
• S. M. Hosseini Sarvari and S. H. Mansouri, Inverse Design for Radiative Heat Source in Two-Dimensional Participating Media, Numer. Heat Transfer B, vol. 46, pp. 283–300, 2004.
   Web of Science ®Google Scholar
• C. T. Salinas, Inverse Radiation Analysis in Two-Dimensional Gray Media Using the Discrete Ordinates Method with a Multidimensional Scheme, Int. J. Thermal Sci., vol. 49, pp. 302–310, 2010.
   Web of Science ®Google Scholar
• A. Demeulenaere and R. van den Braembussche, Three-Dimensional Inverse Method for Turbomachinery Blading Design, ASME J. Turbomachinery, vol. 120, pp. 247–255, 1998.
   Web of Science ®Google Scholar
• L. de Vito, R. A. Van den Braembussche, and H. Deconinck, A Novel Two-Dimensional Viscous Inverse Design Method for Turbomachinery Blading, ASME J. Turbomachinery, vol. 125, pp. 310–316, 2003.
   Web of Science ®Google Scholar
• R. L Barger and C. W Brooks, A Streamline Curvature Method for Design of Supercritical and Subcritical Airfoils, NASA Technical Note D-7770, 1974.
   Google Scholar
• M. Nikfar, A. Ashrafizadeh, and P. Mayeli, Inverse Shape Design via a New Physical-Based Iterative Solution Strategy, Inverse Prob. Sci. Eng., vol. 23, pp. 1138–1162, 2015.
   Web of Science ®Google Scholar
• M. Nili-Ahmadabadi, M. Durali, A. Hajilouy, and F. Ghadak, Inverse Design of 2D Subsonic Ducts Using Flexible String Algorithm, Inverse Prob. Sci. Eng., vol. 17, pp. 1037–1057, 2009.
   Web of Science ®Google Scholar
• M. Nili-Ahmadabadi, A. Hajilouy, F. Ghadak, and M. Durali, A Novel 2-D Incompressible Viscous Inverse Design Method for Internal Flows Using Flexible String Algorithm, J. Fluids Eng., vol. 132, 031401, pp. 1–10, 2010.
   Web of Science ®Google Scholar
• M. Nili-Ahmadabadi, F. Ghadak, and M. Mohammadi, Subsonic and Transonic Airfoil Inverse Design via Ball-Spine Algorithm, Comput. Fluids, vol. 84, pp. 87–96, 2013.
   Web of Science ®Google Scholar
• M. Nili-Ahmadabadi and F. Poursadegh, Centrifugal Compressor Shape Modification Using a Proposed Inverse Design Method, J. Mech. Sci. Technol., vol. 27, pp. 713–720, 2013.
   Web of Science ®Google Scholar
• N. S. Vaghefi, M. Nili-Ahmadabadi, and M. R. Roshani, Optimal Design of Axe-Symmetric Diffuser via Genetic Algorithm and Ball-Spine Inverse Design Method, ASME Proc., Micro- and Nano-Systems Eng. Pkg., vol. 9, pp. 893–902, 2012.
   Google Scholar
• A. Madadi, M. J. Kermani, and M. Nili-Ahmadabadi, Application of an Inverse Design Method to Meet a Target Pressure in Axial-Flow Compressors, ASME Proc., Turbomachinery, vol. 7, pp. 1315–1322, 2011.
   Google Scholar
• A. Madadi, M. J. Kermani, and M. Nili-Ahmadabadi, Application of the Ball-Spine Algorithm to Design Axial-Flow Compressor Blade, Scientia Iranica, vol. 21, pp. 1981–1992, 2014.
   Web of Science ®Google Scholar
• A. Madadi, M. J. Kermani, and M. Nili-Ahmadabadi, Applying the Ball-Spine Algorithm to the Design of Blunt Leading Edge Airfoils for Axial Flow Compressors, J. Mech. Sci. Technol., vol. 28, pp. 4517–4526, 2014.
   Web of Science ®Google Scholar
• A. Madadi, M. J. Kermani, and M. Nili-Ahmadabadi, Aerodynamic Design of S-Shaped Diffusers Using Ball–Spine Inverse Design Method, J. Eng. Gas Turbines Power, vol. 136, 122606, pp. 1:8, 2014.
   Web of Science ®Google Scholar
• M. Safari, M. Nili-Ahmadabadi, A. Ghaei, and E. Shirani, Inverse Design in Subsonic and Transonic External Flow Regimes Using Elastic Surface Algorithm, Comput. Fluids, vol. 102, pp. 41–51, 2014.
   Web of Science ®Google Scholar
• G. E. Schneider and M. J. Raw, Control Volume Finite-Element Method for Heat Transfer and Fluid Flow Using Collocated Variables 1—Computational Procedure, Numer. Heat Transfer A, vol. 11, pp. 363–390, 1987.
   Web of Science ®Google Scholar
• K. A. Hoffmann and S. T. Chiang, Computational Fluid Dynamics, 4th ed., EES, Kansas, pp. 383–388, 2000.
   Google Scholar