A data method using the inner temperature difference to improve the stability of the inverse heat conduction problems

References

• J. P. Hidalgo et al., “An experimental study of full-scale open floor plan enclosure fires,” Fire Safety J., vol. 89, pp. 22–40, 2017. DOI:10.1016/j.firesaf.2017.02.002.
   Web of Science ®Google Scholar
• H. T. Chen, J. H. Lin, and X. J. Xu, “Analytical estimates of surface conditions in laser surface heating process with experimental data,” Int. J. Heat Mass Trans., vol. 67, no. 12, pp. 936–943, 2013. DOI:10.1016/j.ijheatmasstransfer.2013.08.093.
   Google Scholar
• S. Agarwal, N. Sahoo, K. J. Irimpan, V. Menezes, and S. Desai, “Comparative performance assessments of surface junction probes for stagnation heat flux estimation in a hypersonic shock tunnel,” Int. J. Heat Mass Trans., vol. 114, pp. 748–757, 2017. DOI:10.1016/j.ijheatmasstransfer.2017.06.109.
   Web of Science ®Google Scholar
• Z. C. Deng, L. Yang, and N. Chen, “Uniqueness and stability of the minimizer for a binary functional arising in an inverse heat conduction problem,” J. Math. Anal. Appl., vol. 382, no. 1, pp. 474–486, 2011.
   Web of Science ®Google Scholar
• X. Ling, and S. N. Atluri, “Stability analysis for inverse heat conduction problems,” Comput. Model. Eng. Sci., vol. 13, no. 13, pp. 219–228, 2006.
   Google Scholar
• H. Chen, J. I. Frankel, and M. Keyhani, “Nonlinear inverse heat conduction problem of surface temperature estimation by calibration integral equation method,” Numer. Heat Trans. Fundamen., vol. 73, no. 4, pp. 1–29, 2018. DOI:10.1080/10407790.2018.1464316.
   Google Scholar
• S. Khajehpour, M. R. Hematiyan, and L. Marin, “A domain decomposition method for the stable analysis of inverse nonlinear transient heat conduction problems,” Int. J. Heat Mass Trans., vol. 58, no. 1–2, pp. 125–134, 2013. DOI:10.1016/j.ijheatmasstransfer.2012.10.075.
   Web of Science ®Google Scholar
• N. Daouas, “An alternative sensitivity method for a two-dimensional inverse heat conduction-radiation problem based on transient hot-wire measurements,” Numer. Heat Trans. Fundamen., vol. 73, no. 2, pp. 106–128, 2018. DOI:10.1080/10407790.2017.1420325.
   Web of Science ®Google Scholar
• J. I. Frankel, “Regularization of inverse heat conduction by combination of rate sensor analysis and analytic continuation,” J. Eng. Math., vol. 57, no. 2, pp. 181–198, 2007. DOI:10.1007/s10665-006-9073-y.
   Web of Science ®Google Scholar
• Z. C. Feng, J. K. Chen, and Y. Zhang, “Real-time solution of heat conduction in a finite slab for inverse analysis,” Int. J. Therm. Sci., vol. 49, no. 5, pp. 762–768, 2010. DOI:10.1016/j.ijthermalsci.2009.11.002.
   Web of Science ®Google Scholar
• E. B. Coy, “Measurement of Transient Heat Flux and Surface Temperature Using Embedded Temperature Sensors,” J. Thermophys. Heat Trans., vol. 24, no. 1, pp. 77–84, 2010. DOI:10.2514/1.45075.
   Web of Science ®Google Scholar
• L. Zhuo, F. Yi, and S. Meng, “An inverse method for the estimation of a long-duration surface heat flux on a finite solid,” Int. J. Heat Mass Trans., vol. 106, pp. 1087–1096, 2017. DOI:10.1016/2016.10.085.
   Web of Science ®Google Scholar
• K. A. Woodbury, J. V. Beck, and H. Najafi, “Filter solution of inverse heat conduction problem using measured temperature history as remote boundary condition,” Int. J. Heat Mass Trans., vol. 72, no. 72, pp. 139–147, 2014. DOI:10.1016/j.ijheatmasstransfer.2013.12.073.
   Google Scholar
• H. Chen, J. I. Frankel, and M. Keyhani, “Two-probe calibration integral equation method for nonlinear inverse heat conduction problem of surface heat flux estimation,” Int. J. Heat Mass Trans., vol. 121, pp. 246–264, 2018. DOI:10.1016/j.ijheatmasstransfer.2017.12.072.
   Web of Science ®Google Scholar
• J. Ewing, A. Gifford, D. Hubble, P. Vlachos, A. Wicks, and T. Diller, “A direct-measurement thin-film heat flux sensor array,” Meas. Sci. Technol., vol. 21, no. 10, pp. 105201, 2010. DOI:10.1088/0957-0233/21/10/105201.
   Web of Science ®Google Scholar
• D. Hubble and T. Diller, “Development and evaluation of the time-resolved heat and temperature array,” J. Therm. Sci. Eng. Appl., vol. 2, no. 3, pp. 031003, 2010. DOI:10.1115/1.4002772.
   Google Scholar
• T. Vega, B. Y. Lattimer, and T. E. Diller, “Temperature predictions using hybrid heat flux gage measurements,” Fire Technol., vol. 51, no. 3, pp. 723–746, 2014. DOI:10.1007/s10694-013-0381-2.
   Web of Science ®Google Scholar
• E. N. Economou, “A hybrid method for measuring heat flux,” J. Heat Trans.-T ASME, vol. 132, no. 3, pp. 031602, 2010.
   Web of Science ®Google Scholar
• W. Cheng and Y. J. Ma, “A modified regularization method for an inverse heat conduction problem with only boundary value,” Bound Value Probl., vol. 2016, no. 1, pp. 100, 2016. DOI:10.1186/s13661-016-0606-7.
   Google Scholar
• R. L. Mcmasters, “Using derivative regularization to solve inverse heat conduction problems,” Inverse Probl. Sci. Eng., vol. 22, no. 4, pp. 591–601, 2014. DOI:10.1080/17415977.2013.804819.
   Web of Science ®Google Scholar
• J. Zhou, Y. Zhang, J. K. Chen, and Z. C. Feng, “Inverse Heat Conduction Using Measured Back Surface Temperature and Heat Flux,” J. Thermophys. Heat Trans., vol. 24, no. 1, pp. 95–103, 2012. DOI:10.2514/1.40549.
   Web of Science ®Google Scholar
• L. Mongibello, N. Bianco, V. Naso, R. Fucci, and M. D. Somma, “Numerical characterization of a highly concentrated solar radiation sensor based on an inverse method,” Sol. Energy, vol. 111, no. 1, pp. 407–417, 2015. DOI:10.1016/j.solener.2014.09.023.
   Google Scholar
• S. Vakili and S. M. Gadala, “Low cost surrogate model based evolutionary optimization solvers for inverse heat conduction problem,” Int. J. Heat Mass Trans., vol. 56, no. 1–2, pp. 263–273, 2013. DOI:10.1016/j.ijheatmasstransfer.2012.09.009.
   Web of Science ®Google Scholar
• D. Yang, X. Yue, and Q. Yang, “Virtual boundary element method in conjunction with conjugate gradient algorithm for three-dimensional inverse heat conduction problems,” Numer. Heat Trans. Fundament., vol. 72, no. 6, pp. 1–10, 2017. DOI:10.1080/10407790.2017.1409525.
   Web of Science ®Google Scholar
• R. Heyd, “Real-time heat conduction in a self-heated composite slab by Padé filters,” Int. J. Heat Mass Trans., vol. 71, pp. 606–614, 2014. DOI:10.1016/j.ijheatmasstransfer.2013.12.049.
   Web of Science ®Google Scholar
• S. Wu and G. Bercu, “Padé approximants for inverse trigonometric functions and their applications,” J. Inequalities Applicat., vol. 2017, no. 1, pp. 31, 2017. DOI:10.1186/s13660-017-1310-6.
   PubMedGoogle Scholar
• Z. C. Feng, J. K. Chen, Y. Zhang, and S. Montgomery-Smith, “Temperature and heat flux estimation from sampled transient sensor measurements,” Int. J. Therm. Sci., vol. 49, no. 12, pp. 2385–2390, 2010. DOI:10.1016/j.ijthermalsci.2010.08.004.
   Web of Science ®Google Scholar
• D. Philippidis, T. M. Hightower, and R. A. Olivares, “Thermal Capacitance (Slug) Calorimeter Theory including Heat Losses and other Decaying Processes,” presented at the Conf.: Thermal and Fluids Analysis Workshop (TFAWS) 2008, sponsored by NASA Ames Research Center and SJSU, San Jose State University, San Jose, CA, Aug. 18–22, 2008.
   Google Scholar