Numerical study of the oscillation amplitude effect on the heat transfer of oscillatory impinging round jets

References

• C. Camci and F. Herr, “Forced convection heat transfer enhancement using a self-oscillating impinging planar jet,” Transac. Am. Soc. Mech. Eng. J. Heat Transf., vol. 124, no. 4, pp. 770–782, 2002. DOI: 10.1115/1.1471521.
   Web of Science ®Google Scholar
• D. J. Sailor, D. J. Rohli and Q. Fu, “Effect of variable duty cycle flow pulsations on heat transfer enhancement for an impinging air jet,” Int. J. Heat Fluid Flow, vol. 20, no. 6, pp. 574–580, 1999. DOI: 10.1016/S0142-727X(99)00055-7.
   Web of Science ®Google Scholar
• D. Zumbrunnen and M. Aziz, “Convective heat transfer enhancement due to intermittency in an impinging jet. ASME,” Transactions, J. Heat Transf., vol. 115, no. 1, pp. 91–98, 1993. DOI: 10.1115/1.2910675.
   Web of Science ®Google Scholar
• L. Azevedo, B. Webb and M. Queiroz, “Pulsed air jet impingement heat transfer,” Exp. Therm. Fluid Sci., vol. 8, no. 3, pp. 206–213, 1994. DOI: 10.1016/0894-1777(94)90049-3.
   Web of Science ®Google Scholar
• T. Liu and J. Sullivan, “Heat transfer and flow structures in an excited circular impinging jet,” Int. J. Heat Mass Transf., vol. 39, no. 17, pp. 3695–3706, 1996. DOI: 10.1016/0017-9310(96)00027-0.
   Web of Science ®Google Scholar
• R. Nevins and H. Ball, “Heat Transfer between a Flat Plate and a Pulsating Impinging Jet.” in Proceedings of the National Heat Transfer Conference, 1961.
   Google Scholar
• T. S. O’Donovan and D. B. Murray, “Effect of acoustic excitation on the heat transfer to an impinging air jet,” in ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference Collocated with the ASME 2007 InterPACK Conference, 2007. American Society of Mechanical Engineers. DOI: 10.1115/HT2007-32800.
   Google Scholar
• H. J. Poh, K. Kumar and A. S. Mujumdar, “Heat transfer from a pulsed laminar impinging jet,” Int. Commun. Heat Mass Transf., vol. 32, no. 10, pp. 1317–1324, 2005. DOI: 10.1016/j.icheatmasstransfer.2005.07.012.
   Web of Science ®Google Scholar
• R. A. Eibeck, et al., “Pulse combustion: Impinging jet heat transfer enhancement,” Combustion sci. Technol., vol. 94, no. 1-6, pp. 147–165, 1993. DOI: 10.1080/00102209308935308.
   Web of Science ®Google Scholar
• H. M. Hofmann, et al., “Influence of a pulsation on heat transfer and flow structure in submerged impinging jets,” Int. J. Heat Mass Transf., vol. 50, no. 17-18, pp. 3638–3648, 2007. DOI: 10.1016/j.ijheatmasstransfer.2007.02.001.
   Web of Science ®Google Scholar
• T. Persoons, et al., “Scaling of convective heat transfer enhancement due to flow pulsation in an axisymmetric impinging jet,” J. Heat Transf., vol. 135, no. 11, pp. 111012, 2013. DOI: 10.1115/1.4024620.
   Web of Science ®Google Scholar
• H. Herwig and G. Middelberg, “The physics of unsteady jet impingement and its heat transfer performance,” Acta Mech., vol. 201, no. 1-4, pp. 171–184, 2008. DOI: 10.1007/s00707-008-0080-0.
   Web of Science ®Google Scholar
• P. Xu, et al., “Turbulent impinging jet heat transfer enhancement due to intermittent pulsation,” Int. J. Therm. Sci., vol. 49, no. 7, pp. 1247–1252, 2010. DOI: 10.1016/j.ijthermalsci.2010.01.020.
   Web of Science ®Google Scholar
• S. Alimohammadi, D. B. Murray and T. Persoons, “On the numerical–experimental analysis and scaling of convective heat transfer to pulsating impinging jets,” Int. J. Therm. Sci., vol. 98, pp. 296–311, 2015. DOI: 10.1016/j.ijthermalsci.2015.07.022.
   Web of Science ®Google Scholar
• M. Pakhomov and V. Terekhov, “Numerical study of fluid flow and heat transfer characteristics in an intermittent turbulent impinging round jet,” Int. J. Therm. Sci., vol. 87, pp. 85–93, 2015. DOI: 10.1016/j.ijthermalsci.2014.08.007.
   Web of Science ®Google Scholar
• W. Liewkongsataporn, T. Patterson and F. Ahrens, “Pulsating jet impingement heat transfer enhancement,” Drying Technol., vol. 26, no. 4, pp. 433–442, 2008. DOI: 10.1080/07373930801929268.
   Web of Science ®Google Scholar
• K. Esmailpour, et al., “A numerical study of heat transfer in a turbulent pulsating impinging jet,” Can. J. Chem. Eng., vol. 93, no. 5, pp. 959–969, 2015., DOI: 10.1002/cjce.22169.
   Web of Science ®Google Scholar
• V. Katti and S. Prabhu, “Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle,” Int. J. Heat Mass Transf., vol. 51, no. 17-18, pp. 4480–4495, 2008. DOI: 10.1016/j.ijheatmasstransfer.2007.12.024.
   Web of Science ®Google Scholar
• H. M. Hofmann, et al., “Calculations of steady and pulsating impinging jets—an assessment of 13 widely used turbulence models,” Numer. Heat Transf. Part B Fundamentals, vol. 51, no. 6, pp. 565–583, 2007. DOI: 10.1080/10407790701227328.
   Web of Science ®Google Scholar
• L. Fuchs and T. Hallqvist, “Numerical study of impinging jets with heat transfer-inlet conditions effects,” 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2009. in DOI: 10.2514/6.2009-1578.
   Google Scholar
• S. Gao and P. R. Voke, “Large-eddy simulation of turbulent heat transport in enclosed impinging jets,” Int. J. Heat Fluid Flow, vol. 16, no. 5, pp. 349–356, 1995. DOI: 10.1016/0142-727X(95)00050-Z.
   Web of Science ®Google Scholar
• K. N. Volkov, “Unsteady-state heat transfer in the region of interaction between a turbulent jet and an obstacle,” High Temp., vol. 45, no. 6, pp. 818–825, 2007. DOI: 10.1134/S0018151X07060132.
   Web of Science ®Google Scholar
• A. B. Bhagwat and A. Sridharan, “Convective heat transfer from a heated plate to the orthogonally impinging air jet,” J. Therm. Sci. Eng. Appl., vol. 8, no. 4, pp. 041009, 2016. DOI: 10.1115/1.4034058.
   Web of Science ®Google Scholar
• R. Langtry and F. Menter, “Transition modeling for general CFD applications in aeronautics,” in 43rd AIAA Aerospace Sciences Meeting and Exhibit, 2005. DOI: 10.2514/6.2005-522.
   Google Scholar
• P. Malan, K. Suluksna and E. Juntasaro, “Calibrating the gamma-Re_theta transition model for commercial CFD,” in 47th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2009. DOI: 10.2514/6.2009-1142.
   Google Scholar
• F. R. Menter, et al., “A correlation-based transition model using local variables—part I: Model formulation,” J. Turbomach., vol. 128, no. 3, pp. 413–422, 2006. DOI: 10.1115/1.2184352.
   Web of Science ®Google Scholar
• G. Middelberg and H. Herwig, “Convective heat transfer under unsteady impinging jets: The effect of the shape of the unsteadiness,” Heat Mass Transf., vol. 45, no. 12, pp. 1519–1532, 2009. DOI: 10.1007/s00231-009-0527-4.
   Web of Science ®Google Scholar
• E. Mladin and D. Zumbrunnen, “Local convective heat transfer to submerged pulsating jets,” Int. J. Heat Mass Transf., vol. 40, no. 14, pp. 3305–3321, 1997. DOI: 10.1016/S0017-9310(96)00380-8.
   Web of Science ®Google Scholar
• R. Zulkifli and K. Sopian, “Studies on pulse jet impingement heat transfer: Flow profile and effect of pulse frequencies on heat transfer,” Int. J. Eng. Technol., vol. 4, no. 1, pp. 86–94, 2007.
   Google Scholar
• J. W. Gauntner, P. Hrycak and J. Livingood, Survey of literature on flow characteristics of a single turbulent jet impinging on a flat plate. 1970.
   Google Scholar
• H. Martin, “Heat and mass transfer between impinging gas jets and solid surfaces,” in Advances in Heat Transfer. Amsterdam, Netherlands: Elsevier, 1977, pp. 1–60.
   Google Scholar
• R. Antonia, et al., “On the organized motion of a turbulent plane jet,” J. Fluid Mech., vol. 134, no. 1, pp. 49–66, 1983., DOI: 10.1017/S0022112083003213.
   Google Scholar
• S. Beltaos and N. Rajaratnam, “Plane turbulent impinging jets,” j. Hydraulic Res., vol. 11, no. 1, pp. 29–59, 1973. DOI: 10.1080/00221687309499789.
   Google Scholar
• J. Lepicovsky, “Laser velocimeter measurements of large-scale structures in a tone-excited jet,” AIAA J., vol. 24, no. 1, pp. 27–31, 1986. DOI: 10.2514/3.9218.
   Google Scholar
• R. C. Deo, J. Mi, and G. J. Nathan, “Experimental investigations of the effect of Reynolds number on a plane jet,” in Proceedings of the 16th Australasian Fluid Mechanics Conference (AFMC 2007). University of Queensland, School of Engineering, 2007.
   Google Scholar
• W. G. Hill, R. C. Jr, Jenkins and B. L. Gilbert, “Effects of the initial boundary-layer state on turbulent jet mixing,” AIAA J., vol. 14, no. 11, pp. 1513–1514, 1976. DOI: 10.2514/3.61491.
   Google Scholar
• J. Kuhlman, “Survey of nearfield Reynolds number effects and initial condition effects on buoyant and non-buoyant jets.” in Int. Symp. On Modeling Environmental Flows, 1985.
   Google Scholar
• N. Van and R. Howell, “Influence of initial turbulence intensity on the development of plane air-curtain jets,” ASHRAE Trans., vol. 82, no. 1, pp. 208–228, 1976.
   Google Scholar
• C. O. Popiel and O. Trass, “Visualization of a free and impinging round jet,” Exp. Therm. Fluid Sci., vol. 4, no. 3, pp. 253–264, 1991. DOI: 10.1016/0894-1777(91)90043-Q.
   Web of Science ®Google Scholar