Modeling Convection-Driven Diffusion-Controlled Wet Chemical Etching Using a Total-Concentration Fixed-Grid Method

REFERENCES

• K. H. Hoffman and J. Sprekels , Free Boundary Problems: Theory and Applications , vol. 1 , p. 89 , Longman , Essex, Harlow , UK , 1990 .
   Google Scholar
• M. J. Madou , Fundamentals of Microfabrication, , 2nd ed. , CRC Press , New York , 2002 .
   Google Scholar
• K. S. J. Pister , M. W. Judy , S. R. Burgett , and R. S. Fearing , Microfabricated Hinges, Sensors and Actuators A , vol. 33, pp. 249–256, 1992.
   Web of Science ®Google Scholar
• C. H. Mastrangelo , X. Zhang , and W. C. Tang , Surface Micromachined Capacitive Differential Pressure Sensor with Lithographically-Defined Silicon Diaphragm , 8th Int. Conf. on Solid-State Sensors and Actuators, Eurosensor IX , Stockholm , June 25–29 , 1995 , pp. 612 – 615 .
   Google Scholar
• R. W. Tjerkstra , Isotropic Etching of Silicon in Fluoride Containing Solutions as a Tool for Micromachining , PhD. thesis , University of Twente, Twente , The Netherlands , 1999 .
   Google Scholar
• H. K. Kuiken , Etching: A Two-Dimensional Mathematical Approach , Proc. Roy. Soc. Lon. A , vol. 392 , pp. 199 – 225 , 1984 .
   Google Scholar
• H. K. Kuiken , Etching Through A Slit , Proc. Roy. Soc. Lon. A , vol. 396 , pp. 95 – 117 , 1984 .
   Google Scholar
• C. Vuik and C. Cuvelier , Numerical Solution of an Etching Problem , J. Comput. Phys. , vol. 59 , pp. 247 – 263 , 1985 .
   Web of Science ®Google Scholar
• J. C. Bruch Jr. , C. A. Papadopoulos , and J. M. Sloss , Parallel Computing Used in Solving Wet Chemical Etching Semiconductor Fabrication Problems , GAKUTO International Series, Mathematical Sciences and Applications , vol. 1 , pp. 281 – 292 , 1993 .
   Google Scholar
• H. K. Kuiken , J. J. Kelly , and P. H. L. Notten , Etching Profiles at Resist Edges—I: Mathematical Models For Diffusion-Controlled Cases , J. Electrochem. Soc. , vol. 133 , pp. 1217 – 1226 , 1986 .
   Web of Science ®Google Scholar
• P. H. L. Notten , J. J. Kelly , and H. K. Kuiken , Etching Profiles at Resist Edges—II: Experimental Confirmation of Models Using GaAs , J. Electrochem. Soc. , vol. 133 , pp. 1226 – 1232 , 1986 .
   Web of Science ®Google Scholar
• C. B. Shin and D. J. Economou , Effect of Transport and Reaction on the Shape Evolution of Cavities during Wet Chemical Etching , J. Electrochem. Soc. , vol. 136 , pp. 1997 – 2004 , 1989 .
   Web of Science ®Google Scholar
• C. B. Shin and D. J. Economou , Forced and Natural Convection Effects on the Shape Evolution of Cavities during Wet Chemical Etching , J. Electrochem. Soc. , vol. 138 , pp. 527 – 538 , 1991 .
   Web of Science ®Google Scholar
• Y. C. Lam , J. C. Chai , P. Rath , H. Zheng , and V. M. Murukeshan , A Fixed-Grid Method for Chemical Etching , Int. Commun. Heat Mass Transfer , vol. 31 , pp. 1123 – 1131 , 2004 .
   Web of Science ®Google Scholar
• P. Rath , J. C. Chai , H. Zheng , Y. C. Lam , V. M. Murukeshan , and H. Zhu , A Fixed-Grid Approach for Diffusion- and Reaction-Controlled Wet Chemical Etching , Int. J. Heat Mass Transfer , vol. 48 , pp. 2140 – 2149 , 2005 .
   Web of Science ®Google Scholar
• P. Rath , J. C. Chai , H. Zheng , Y. C. Lam , and V. M. Murukeshan , Modeling Two-Dimensional Diffusion-Controlled Wet Chemical Etching Using a Total Concentration Approach , Int. J. Heat Mass Transfer , vol. 49 , pp. 1480 – 1488 , 2006 .
   Web of Science ®Google Scholar
• P. Rath , J. C. Chai , H. Zheng , Y. C. Lam , and V. M. Murukeshan , Total Concentration Approach for Three-Dimensional Diffusion-Controlled Wet Chemical Etching , Int. J. Heat Mass Transfer , vol. 49 , pp. 3408 – 3416 , 2006 .
   Web of Science ®Google Scholar
• P. Rath , J. C. Chai , H. Zheng , Y. C. Lam , and V. M. Murukeshan , A Total Concentration Fixed-Grid Method for Two-Dimensional Wet Chemical Etching , ASME J. Heat Transfer , vol. 129 , pp. 509 – 516 , 2007 .
   Web of Science ®Google Scholar
• K. Kaneko , T. Noda , M. Sakata , and T. Uchiyama , Observation and Numerical Simulation for Wet Chemical Etching Process of Semiconductor , Proc. 4th ASME-JSME Joint Fluids Engineering Conf. , Honolulu , HI , July 6–10 , 2003 .
   Google Scholar
• C. H. Driesen , Simulation of Convection-Driven Wet-Chemical Etching , PhD. thesis , University of Twente, Twente , The Netherlands , 1999 .
   Google Scholar
• D. Adalsteinsson and J. A. Sethian , A Level Set Approach to a Unified Model for Etching, Deposition and Lithography I: Alogorithms and Two-Dimensional Simulations , J. Comput. Phys. , vol. 120 , pp. 128 – 144 , 1995 .
   Web of Science ®Google Scholar
• D. Adalsteinsson and J. A. Sethian , A Level Set Approach to a Unified Model for Etching, Deposition and Lithography II: Three-Dimensional Simulations, J. Comput. Phys. , vol. 122, pp. 348–366, 1995.
   Web of Science ®Google Scholar
• A. La Magna , G. D'Arrigo , G. Garozzo , and C. Spinella , Computational Analysis of Etched Profile Evolution for the Derivation of 2D Dopant Density Maps in Silicon , Mater. Sci. Eng. B , vol. 102, 1–3 , pp. 43 – 48 , 2003 .
   Google Scholar
• N. Shamsundar and E. M. Sparrow , Analysis of Multidimensional Conduction Phase Change via the Enthalpy Method , ASME J. Heat Transfer , vol. 97 , pp. 333 – 340 , 1975 .
   Web of Science ®Google Scholar
• V. Voller and M. Cross , Accurate Solutions of Moving Boundary Problems Using the Enthalpy Method , Int. J. Heat Mass Transfer , vol. 24 , pp. 545 – 556 , 1981 .
   Web of Science ®Google Scholar
• R. E. White , An Enthalpy Formulation of the Stefan Problem , SIAM J. Numer. Anal. , vol. 19 , pp. 1129 – 1157 , 1982 .
   Web of Science ®Google Scholar
• V. Voller and C. Prakash , A Fixed-Grid Numerical Modeling Methodology for Convection-Diffusion Mushy Region Phase-Change Problems , Int. J. Heat Mass Transfer , vol. 30 , pp. 1709 – 1719 , 1987 .
   Web of Science ®Google Scholar
• C. Prakash , M. Samonds , and A. K. Singhal , A Fixed-Grid Numerical Methodology for Phase Change Problems Involving a Moving Heat Source , Int. J. Heat Mass Transfer , vol. 30 , pp. 2690 – 2694 , 1987 .
   Web of Science ®Google Scholar
• A. D. Brent , V. R. Voller , and K. J. Reid , Enthalpy-Porosity Technique for Modeling Convection-Diffusion Phase Change: Application to the Melting of a Pure Metal , Numer. Heat Transfer , vol. 13 , pp. 297 – 318 , 1988 .
   Web of Science ®Google Scholar
• X. Zeng and M. D. Xin , An Implicit Finite Difference Solution of Phase Change Problems via Coupling the Enthalpy and Moving Boundary , HTD-159, Phase Change Heat Transfer , ASME , New York , 1991 .
   Google Scholar
• C. K. Chun and S. O. Park , A Fixed-Grid Finite-Difference Method for Phase-Change Problems , Numer. Heat Transfer B , vol. 38 , pp. 59 – 73 , 2000 .
   Web of Science ®Google Scholar
• B. Nedjar , An Enthalpy-Based Finite Element Method for Non-linear Heat Problems Involving Phase Change , Comput. Struct. , vol. 80 , pp. 9 – 21 , 2002 .
   Web of Science ®Google Scholar
• K.-G. Kang and H.-S. Ryou , Computation of Solidification and Melting Using the PISO Algorithm , Numer. Heat Transfer B , vol. 46 , pp. 179 – 194 , 2004 .
   Web of Science ®Google Scholar
• Y.-C. Shih and H. Chou , Numerical Study of Solidification around Staggered Cylinders in a Fixed Space , Numer. Heat Transfer A , vol. 48 , pp. 239 – 260 , 2005 .
   Web of Science ®Google Scholar
• S. Ganguly and S. Chakraborty , A Generalized Enthalpy-Based Macro Model for Ternary Alloy Solidification Simulations , Numer. Heat Transfer B , vol. 51 , pp. 293 – 313 , 2007 .
   Web of Science ®Google Scholar
• E. Feulvarch and J.-M. Bergheau , An Implicit Fixed-Grid Method for the Finite-Element Analysis of Heat Transfer Involving Phase Changes , Numer. Heat Transfer B , vol. 51 , pp. 585 – 610 , 2007 .
   Web of Science ®Google Scholar
• S. V. Patankar , Numerical Heat Transfer and Fluid Flow , Hemisphere , New York , 1980 .
   Google Scholar
• H. K. Versteeg and W. Malalasekra , An Introduction to Computational Fluid Dynamics: The Finite Volume Method , Addison Wesley Longman , Essex, Harlow , UK , 1995 .
   Google Scholar