Spray Drying of Fruit and Vegetable Juices—A Review

REFERENCES

• Abadio, F.D. B., Domingues, A.M., Borges, S.V. and Oliveira, V.M. (2004). Physical properties of powdered pineapple (Ananas comosus) juice—Effect of maltodextrin concentration and atomization speed. J. Food Eng. 64(3):285–287.
   Web of Science ®Google Scholar
• Adhikari, B., Howes, T. and Bhandari, B.R. (2006). Use of solute fixed coordinate system and method of lines for prediction of drying kinetics and surface stickiness of single droplet during convective drying. Chem. Eng. Process. 46(5):205–419.
   Web of Science ®Google Scholar
• Adhikari, B., Howes, T., Bjandari, B.R. and Troung, V. (2004). Effect of addition of maltodextrin on drying kinetics and stickiness of sugar and acid-rich foods during convective drying experiments and modelling. J. Food Eng. 62(1):53–68.
   Web of Science ®Google Scholar
• Adhikari, B., Howes, T., Shrestha, A. and Bhandari, B.R. (2007). Effect of surface tension and viscosity on the surface stickiness of carbohydrate and protein solutions. J. Food Eng. 79(4):1136–1143.
   Web of Science ®Google Scholar
• Adhikari, B., Howes, T. and Troung, V. (2003). Surface stickiness of drops of carbohydrates and organic acid solutions during convective drying: Experiments and modelling. Drying Technol. 21(5):839–873.
   Web of Science ®Google Scholar
• Aguilera, J.M., del Valle, J.M. and Karel, M. (1995). Caking phenomena in amorphous food powders. Trends Food Sci. Technol. 6(5):149–155.
   Web of Science ®Google Scholar
• Ahmed, M., Akter, M.S. and Eun, J.B. (2009). Effect of maltodextrin concentration and drying temperature on quality properties of purple sweet potato flour. Food Sci. Biotechnol. 18:1487–1494.
   Web of Science ®Google Scholar
• Ahmed, M., Akter, M.S. and Eun, J.B. (2010). Impact of a-amylase and maltodextrin on physicochemical, functional and antioxidant capacity of spray-dried sweet potato flour. J. Sci. Food Agric. 90:494–502.
   PubMed Web of Science ®Google Scholar
• Ahmed, M., Akter, M.S., Lee, J.C. and Eun, J.B. (2011). Encapsulation by spray drying of bioactive components, physicochemical and morphological properties from purple sweet potato. LWT—Food Sci. Technol. 43:1307–1312.
   Web of Science ®Google Scholar
• Al-Kahtani H. and Bakri, H. (1990). Spray drying of Hibiscus sabdariffa L. extract. J. Food Sci. 55:1073–1076.
   Web of Science ®Google Scholar
• AOAC. (2000). Official Methods of Analysis. Association of Official Analytical Chemists, Inc., Virginia.
   Google Scholar
• Balladin, D.A. and Headley, O. (1998). Liquid chromatographic analysis of the main pungent principles of solar dried West Indian ginger (Zingiber officinale Roscoe). Renew. Energ. 18:257–261.
   Web of Science ®Google Scholar
• Bao, J.S., Cai, Y.Z., Sun, M., Wang, G.Y. and Corke, H. (2005). Anthocyanins, flavonols, and free radical scavenging activity of Chinese bayberry (Myrica rubra) extracts and their color properties and stability. J. Agricult. Food Chem. 53:2327–2332.
   PubMed Web of Science ®Google Scholar
• Barros Neto, B., Scarmınio, I.S. and Bruns, R.E. (1995). Planejamento e otimizaçäo de experimentos, p. 299. UNICAMP, Campinas.
   Google Scholar
• Bertling, J., Blömer, J. and Kümmel, R. (2004). Hollow microspheres. Chem. Eng. Technol. 27(8):829–837.
   Web of Science ®Google Scholar
• Bhandari, S.R., Datta, N. and Howes, T. (1997). Problems associate with spray drying of sugar-rich foods. Drying Technol. 15(2):671–684.
   Web of Science ®Google Scholar
• Bhandari, B.R. and Hartel, R.W. (2005). Phase transitions during food powder production and powder stability. In: Encapsulated and Powdered Foods, pp. 261–292. Onwulata, C., Ed., Taylor & Francis, Boca Raton, FL.
   Google Scholar
• Bhandari, B.R., Senoussi, A., Dumoulin, E.D. and Lebert, A. (1993). Spray drying of concentrated fruit juices. Drying Technol. 11(5):1081–1092.
   Web of Science ®Google Scholar
• Buhler, W. and W. Liedy. (1989). Characterization of product qualities and its application in drying process development. Chem. Eng. Progress. 26(1):27–34.
   Web of Science ®Google Scholar
• Brennan, J.G., Herrera, J. and Jowitt, R. (1971). A study of some of the factors affecting the spray drying of concentrated orange juice on a laboratory scale. J. Food Technol. 6(3):295–307.
   Google Scholar
• Cai, Y.Z. and Corke, H. (2000). Production and properties of spray dried amaranthus betacyanim pigments. J. Food Sci. 65(6):1248–1252.
   Web of Science ®Google Scholar
• Cano-Chauca, M., Stringheta, P.C., Ramos, A.M. and Cal-Vidal, J. (2005). Effect of the carriers on the microstructure of mango powder obtained by spray drying and its functional characterization. Innov. Food Sci. Emerg. Technol. 6:420–428.
   Web of Science ®Google Scholar
• Chegini, G.R. and Ghobadian, B. (2005). Effect of spray-drying conditions on physical properties of orange juice powder. Drying Technol. 23:657–668.
   Web of Science ®Google Scholar
• Chegini, G.R. and Ghobadian, B. (2007). Spray dryer parameters for fruit juice drying. World J. Agricult. Sci. 3:230–236.
   Google Scholar
• Chegini, G.R., Khazaei, J., Ghobadian, B. and Goudarzi, A.M. (2008). Prediction of process and product parameters in an orange juice spray dryer using artificial neural networks. J. Food Eng. 84:534–543.
   Web of Science ®Google Scholar
• Chen, W.Z. and Hoseney, R.N. (1995). Development of an objective method for dough stickiness. Lebensmittel-Wissenschaft und -Technologie 28:467–473.
   Web of Science ®Google Scholar
• Chin, S.T., Nazimah, S.A. H., Quek, S.Y., Man, Y.B. C., Rahman, R.A. and Hashim, D.M. (2008). Changes of volatiles’ attribute in durian pulp during freeze- and spray-drying process. LWT—Food Sci. Technol. 41:1899–1905.
   Web of Science ®Google Scholar
• Chiou, D. and Langrish, T.A. G. (2007). Development and characterisation of novel nutraceuticals with spray drying technology. J. Food Eng. 82:84–91.
   Web of Science ®Google Scholar
• Chopda, C.A. and Barrett, D.M. (2001). Optimization of guava juice and powder production. J. Food Process. Pres. 25(6):411–430.
   Web of Science ®Google Scholar
• Christofides, P.D. (2002). Model-based Control of Particulate Processes. Kluwer Academic Publishers, Norvell, MA.
   Google Scholar
• Crowe, C.T. (1980). Modelling Spray-air Contact in Spray Drying Systems, volume 1 of Advances in Drying, chapter 3. Hemisphere Publishing, New York, NY.
   Google Scholar
• De Oliveira, M.A., Maia, G.A., De Figueiredo, R.W., De Souza, A.C. R., De Brito, E.S. and De Azeredo, H.M. C. (2009). Addition of cashew tree gum to maltodextrin-based carriers for spray drying of cashew apple juice. Int. J. Food Sci. Technol. 44:641–645.
   Web of Science ®Google Scholar
• DiTommaso, E., Brannen-McNulty, C., Ross, L. and Burgess, M. (2003). Attachment styles, social skills and loneliness in young adults. Pers. Indiv. Differ. 35(2):303–312.
   Web of Science ®Google Scholar
• Dolinsky, A.A. and Gurov, A. (1986). Method of production vegetable and fruit powders. USSR. No. 1270511.
   Google Scholar
• Downton, G.E., Flores-Luna, J.L. and King, C.J. (1982). Mechanism of stickiness in hygroscopic amorphous powders. Ind. Eng. Chem. Fundamentals 21:447–451.
   Web of Science ®Google Scholar
• Eastman, J.E. and Moore, C.O. (1984). Cold water soluble granular starch for gelled food composition. US Patent 4465702.
   Google Scholar
• Ersus, S., Baysal, T., Yurdagel, U. and El, S.N. (2004). Effects of drying process on antioxidant activity of purple carrots. Nahrung 48(1):57–60.
   PubMedGoogle Scholar
• Ersus, S. and Yurdagel, U. (2006). Microencapsulation of anthocyanin pigments of black carrot (Daucuscarota L.) by spray drier. J. Food Eng. 80:805–812.
   Web of Science ®Google Scholar
• Fang, Z. and Bhandari, B. (2011). Effect of spray drying and storage on the stability of bayberry polyphenols. Food Chem. 129:1139–1147.
   PubMed Web of Science ®Google Scholar
• Fang, Z.X., Zhang, M., Sun, Y.F. and Sun, J.C. (2007). Polyphenol oxidase from bayberry (Myrica rubra Sieb. et Zucc.) and its role in anthocyanin degradation. Food Chem. 103:268–273.
   Web of Science ®Google Scholar
• Fang, Z.X., Zhang, Y.H., Lü, Y., Ma, G.P., Chen, J.C. and Liu, D.H. (2009). Phenolic compounds and antioxidant capacities of bayberry juices. Food Chem. 113:884–888.
   Web of Science ®Google Scholar
• Fletcher, D., Guo, B., Harvie, D., Langrish, T., Nijdam, J. and Williams, J. (2003). What is important in the simulation of spray dryer performance and how do current CFD models perform? In: Proceedings of the 3rd International Conference on CFD in Minerals and Process Industries.
   Google Scholar
• Fletcher, D. and Langrish, T. (2003). Prospects for modelling and design of spray driers in the 21st century. Drying Technol. 21:197–215.
   Web of Science ®Google Scholar
• Gauvin, W.H., Katta, S. and Knelman, F.H. (1975). Drop trajectory predictions and their importance in the design of spray dryers. Int. J. Multiphase Flow 1(6):793–816.
   Google Scholar
• Georgetti, S.R., Casagrande, R., Souza, C.R. F., Oliveira, W.P. and Fonseca, M.J. V. (2008). Spray drying of the soybean extract: Effects on chemical properties and antioxidant activity. LW—Food Sci. Technol. 41:1521–1527.
   Web of Science ®Google Scholar
• Goffredi, R.A. and Crosby, E.J. (1983). Limiting analytical relationships for prediction of spray dryer performance. Ind. Eng. Process Des. Dev. 22:665–672.
   Web of Science ®Google Scholar
• Gombas, A., Antal, I., Szabo-Revesz, P., Marton, S. and Eros, I. (2003). Quantitative determination of crystallinity of alpha-lactose monohydrate by near infrared spectroscopy (NIRS). Int. J. Pharmaceutics 256:25–32.
   PubMed Web of Science ®Google Scholar
• Gouin, S. (2004). Microencapsulation: Industrial appraisal of existing technologies and trends. Trends Food Sci. Technol. 15(7–8):330–347.
   Web of Science ®Google Scholar
• Goula, A.M. and Adamopoulos, K.G. (2005). Spray drying of tomato pulp in dehumidified air. I. The effect on product recovery. J. Food Eng. 66:25–34.
   Web of Science ®Google Scholar
• Goula, A.M. and Adamopoulos, K.G. (2005b). Spray drying of tomato pulp in dehumidified air: II. The effect on powder properties. J. Food Eng. 66:35–42.
   Web of Science ®Google Scholar
• Goula, A.M. and Adamopoulos, K.G. (2010). A new technique for spray drying orange juice concentrate. Innov. Food Sci. Emerg. Technol. 11:342–351.
   Web of Science ®Google Scholar
• Goula, A., Adamopoulos, K.G. and Kazakis, N.A. (2004). Influence of spray drying conditions on tomato powder properties. Drying Tech. 22:1129–1151.
   Web of Science ®Google Scholar
• Goula, A.M., Karapantsios, T.D., Achilias, D.S. and Adamopoulos, K.G. (2008). Water sorption isotherms and glass transition temperature of spray dried tomato pulp. J. Food Eng. 85:73–83.
   Web of Science ®Google Scholar
• Grabowski, J.A., Truong, V.D. and Daubert, C.R. (2006). Spraydrying of amylase hydrolyzed sweetpotato puree and physicochemical properties of powder. J. Food Sci. 71:E209–E217.
   Web of Science ®Google Scholar
• Gransmith, M. (1971). Dehydration of foods. In: Practical Dehydration, pp. 125–133. Food Trade Press, London, UK.
   Google Scholar
• Gupta, A.S. (1978). Spray drying of orange juice. US Patent 4112130.
   Google Scholar
• Hennigs, C., Kockel, T.K. and Langrish, T.A. G. (2001). New measurements of the sticky behavior of skim milk powder. Drying Technol. 19:471–484.
   Web of Science ®Google Scholar
• Incropera, F.P. and DeWitt, D.P. (2002). Fundamentals of Heat and Mass Transfer. 5th ed. John Wiley and Sons, New York.
   Google Scholar
• Instituto De Adolfo Lutz. (1977). Normas Analíticas: Métodos físicos y químicos para analise de alimentos. IAL, São Paulo.
   Google Scholar
• Izidoro, D.R., Demczuk Junior, B., Haminiuk, C.W. I., Sierakowski, M.-R., Freitas, R.J. S. and Scheer, A.P. (2008). Granules morphology and rheological behaviour of Green banana (Musa cavendishii) and corn (Zea mays) starch gels. Ciência e agrotecnologia 31(5):1443–1448.
   Web of Science ®Google Scholar
• Izidoro, D.R., Sierakowski, M.R., Haminiuk, C.W. I., De Souza, C.F. and Scheer, A.P. (2011). Physical and chemical properties of ultrasonically, spray-dried green banana (Musa cavendish) starch. J. Food Eng. 104:639–648.
   Web of Science ®Google Scholar
• Jaya, S. (2002). Vacuum drying of mango pulp. Unpublished Ph.D Thesis. Indian Institute of Technology, Kharagpur, West Bengal, India.
   Google Scholar
• Jaya, S. and Das, H. (2004). Effect of maltodextrin, glycerol monostearate and tricalcium phosphate on vacuum dried mango powder properties. J. Food Eng. 63:125–134.
   Web of Science ®Google Scholar
• Jayaraman, K.S. and Das Gupta, D.K. (1995). Drying of fruits and vegetables. In: Handbook of Industrial Drying. 2nd ed. pp. 661–662. Marcel Dekker Inc., New York.
   Google Scholar
• Kabanov, L. (1985). Drying of fruit juices and puree by the spraying method. Information Bul., Moscow, USSR.
   Google Scholar
• Karatas, S. (1989). A laboratory scraped surface drying chamber for spray drying of tomato paste. Lebensmittel-Wissenschaft und Technologie 23(4):354–357.
   Google Scholar
• Karatas, S. and Esin, A. (1994). Determination of moisture diffusivity and behavior of tomato concentrate droplets during drying in air. Drying Technol. 12(4):799–822.
   Web of Science ®Google Scholar
• Karel, M. and Lund, D.B. (2003). Physical principles of food preservation. Food Sci. Technol. 129:360–441.
   Google Scholar
• Katta, S. and Gauvin, W. (1976). Basic concepts of spray dryer design. AICHE J. 22(4):713–724.
   Web of Science ®Google Scholar
• Keey, R.B. and Pham, Q.T. (1976). Behavior of spray dryers with nozzle atomizers. Chem. Engineer 311:516–521.
   Google Scholar
• Kha, T.C., Nguyen, M.H. and Roach, P.D. (2010). Effects of spray drying conditions on the physicochemical and antioxidant properties of the Gac (Momordica cochinchinensis) fruit aril powder. J. Food Eng. 98:385–392.
   Web of Science ®Google Scholar
• Khalil, M.A. and Sial, M.B. (1974). Spray drying of mango juice powder. Mesopotamia J. Agricult. 9(1/2):47–56.
   Google Scholar
• Kieviet, F. (1997). Modeling quality in spray drying. Doctor of philosophy, Eindhoven University of Technology, The Netherlands.
   Google Scholar
• Kim, E.H.-J., Chen, X.D. and Pearce, D. (2003). On the mechanisms of surface formation and the surface composition of industrial milk powder. Drying Technol. 21(2):265–278.
   Web of Science ®Google Scholar
• Kosaraju, S.L., Labbett, D., Emin, M., Konczak, I. and Lundin, L. (2008). Delivering polyphenols for healthy ageing. Nutr. Diet. 65:S48–S52.
   Web of Science ®Google Scholar
• Lazar, M.E., Brown, A.H., Smith, G.S., Wong, F.F. and Lindquist, F.E. (1956). Experimental production of tomato powder by spray drying. Food Technol. 10:129–137.
   Web of Science ®Google Scholar
• Legendre, D. and Magnaudet, J. (1998). The lift force on a spherical bubble in a viscous linear shear flow. J. Fluid Mechanics 368:81–126.
   Web of Science ®Google Scholar
• Leung, A.Y. and Foster, S. (1996). Encyclopedia of Common Natural Ingredients used in Food, Drugs, and Cosmetics. 2nd ed., pp. 6–7. Wiley, New York.
   Google Scholar
• Lewis, M.J. (1993). Propriedades físicas de los alimentos y de los sistemas de procesado. Acribia, Zaragoza.
   Google Scholar
• Mani, S., Jaya, S. and Das, H. (2002). Sticky Issues on Spray Drying of Fruit Juices September 27–28, Paper No: MBSK 02-201 An ASAE Meeting Presentation.
   Google Scholar
• Marshall, Jr. W.R. and Seltzer, E. (1950). Principles of spray drying. Part -1: Fundamentals of spray-drying operation. Chem. Eng. Progress. 46(10):501–508.
   Web of Science ®Google Scholar
• Masters, K. (1979). Spray-air contact (mixing and flow). Spray drying handbook (pp. 286–290)., 3rd ed. New York: Halsted Press.
   Google Scholar
• Masters, K. (1985). Spray Drying Handbook. 4th ed. Longman Scientific and Technical, England.
   Google Scholar
• Masters, K. (1991). Spray Drying Handbook. 5th ed. John Wiley and Sons, New York, NY.
   Google Scholar
• Masters, K. (1994). Scale-up of Spray dryers. Drying Technol. 12:235–257.
   Web of Science ®Google Scholar
• Mezadri, T., Fernández-Pachón, M.S., Villanõ, D., García-Parrilla, M.C. and Troncoso, A.M. (2006). El fruto de la acerola: Composición. características productivas e importância econômica. Archivos Latinoamericanos de Nutrición 56(2). http://www.alanrevista.org/ediciones/2006-2/fruto_acerola.asp.
   PubMed Web of Science ®Google Scholar
• Moreira, G.E. G., Costa, M.G. M., De Souza, A.C. R., De Brito, E.S., De Medeiros, M.F. D. and De Azeredo, H.M. C. (2009). Physical properties of spray dried acerola pomace extract as affected by temperature and drying aids. LWT—Food Sci. Technol. 42:641–645.
   Web of Science ®Google Scholar
• Nijdam, J., Guo, B., Fletcher, D. and Langrish, T. (2003). Lagrangian and eulerian models for simulating turbulent dispersion and agglomeration of droplets within a spray. In: Proceedings of the 3rd International Conference on CFD in Minerals and Process Industries.
   Google Scholar
• Nijdam, J.J. and Langrish, T.A. G. (2006). The effect of surface composition on the functional properties of milk powder. J. Food Eng. 77(4):919–925.
   Web of Science ®Google Scholar
• Oakley, D. (2004). Spray dryer modeling in theory and practice. Drying Technol. 22(6):1371–1402.
   Web of Science ®Google Scholar
• Oakley, D.E., Bahu, R.E. and Reay, D. (1988). The aerodynamics of cocurrent spray dryers. In: Proceedings of the Sixth International Drying Symposium, pp. 373–378.
   Google Scholar
• Osorio, C., Forero, D.P. and Carriazo, J.G. (2011). Characterisation and performance assessment of guava (Psidium guajava L.) microencapsulates obtained by spray-drying. Food Res. Int. 44:1174–1181.
   Web of Science ®Google Scholar
• Ozmen, L. and Langrish, T.A. G. (2003). A study of the limitations to spray dryer outlet performance. Drying Technol. 21(5):895–917.
   Web of Science ®Google Scholar
• Palencia, C., Nava, J., Herman, E., Rodríguez-Jimenes, G. and García-Alvarado, M. (2002). Spray dryer dynamic modeling with a mechanistic model. Drying Technol. 20(3):569–586.
   Web of Science ®Google Scholar
• Palermiti, F.M. (1991). Method of manufacturing a juice concentrate. US Patent 5194280.
   Google Scholar
• Papadakis, S.E. and Babu, R.E. (1992). The sticky issues of drying. Drying Technol. 10(40):817–837.
   Web of Science ®Google Scholar
• Papadakis, S.E., Gardeli, C. and Tzia, C. (2006). Spray drying of raisin juice concentrate. Drying Technol. 24(2):173–180.
   Web of Science ®Google Scholar
• Patel, R.P., Patel, M.P. and Suthar, A.M. (2009). Spray drying technology: An overview. Indian J. Sci. Technol. 2(10): 44--47.
   Google Scholar
• Patsvas, A.C. (1963). Equipment for the food industry—4: The spray dryer. Chem. Eng. Progress. 59(4):65–70.
   Google Scholar
• Peleg, M. (1983). Physical characteristics of food powders. In: Physical Properties of Foods, pp. 293–323. Peleg, M. and Bagley, E.B., Eds., AVI Publishing Co., Westport, CT.
   Google Scholar
• Peleg, M. and Hollenbech, A.M. (1984). Flow conditioners and anti caking agents. Food Technol. 38(3):93–102.
   Web of Science ®Google Scholar
• Phoungchandang, S. and Sertwasana, A. (2010). Spray-drying of ginger juice and physicochemical properties of ginger powders. Sci. Asia 360–45.
   Web of Science ®Google Scholar
• Pisecky, J. (1978). Bulk density of milk powders. Dairy Ind. Int. 2:4–11.
   Google Scholar
• Ponting, J.D., Stanley, W.L. and Copley, M.J. (1973). Fruit and vegetables juices. In: Food Dehydration. 2nd ed., pp. 211–215. Van Arsdel, B.S., Copley, M.J. and Morgan, A.I., Eds., AVI Publishing Company Inc., Westport, Connecticut.
   Google Scholar
• Quek, S.Y., Chok, N.K. and Swedlund, P. (2007). The physicochemical properties of spray-dried watermelon powders. Chem. Eng. Process. 46:386–392.
   Web of Science ®Google Scholar
• Rao, R.H. G. and Gupta, P.M. (2002). Development of spray dried orange juice blend skim milk powder. Lait 82:523–529.
   Google Scholar
• Ré, M.I. (1998). Microencapsulation by spray drying. Drying Technol. 16(6):1195–1236.
   Web of Science ®Google Scholar
• Roos, Y.H. (1995). Phase Transitions in Foods. Academic Press, Inc., San Diego.
   Google Scholar
• Roos, Y. and Karel, M. (1991). Plasticizing effect of water on thermal behavior and crystallization of amorphous food materials. J. Food Sci. 56:38–43.
   Web of Science ®Google Scholar
• Roustapour, O.R. (2006). Study of drying kinetics of lime juice in spray dryer and its thermophysical properties under different conditions. Thesis's of the Report (In Persian), Tarbiat Modares University, Iran.
   Google Scholar
• Sánchez-Hernandez, L. (1999). Desarollo de un procedimento tecnologico para la producción de maltodextrinas a partir de almidón de plátano. Instituto Tecnológico de Acapulco. Doctoral Thesis, México.
   Google Scholar
• Shabde, V. (2006). Optimal design and control of a spray drying process that manufactures hollow micro-particles. A dissertation in Chemical Engineering.
   Google Scholar
• Shabde, V.S. and Hoo, K.A. (2006). Design and operation of a spray dryer for the manufacture of hollow microparticles. Ind. Eng. Chem. Res. 45:8329–8337.
   Web of Science ®Google Scholar
• Shrestha, A.K., Ua-arak, T., Adhikari, B.R., Howes, T. and Bhandari, B.R. (2007). Glass transition behavior of spray dried orange juice powder measured by differential scanning calorimetry (DSC) and thermal mechanical compression test (TMCT). Int. J. Food Prop. 10:661–673.
   Web of Science ®Google Scholar
• Silva, M.A., Sobral, P.J. A. and Kieckbusch, T.G. (2006). State diagrams of freeze-dried camu–camu (Myrciaria dubia (HBK) Mc Vaugh) pulp with and without maltodextrin addition. J. Food Eng. 77(3):426–432.
   Web of Science ®Google Scholar
• Singhanat, P. (2010). Spray-drying of ginger juice and physicochemical properties of ginger powders. Anong Sertwasana Science Asia 360–45.
   Google Scholar
• Sommerfeld, M. and Blei, S. (2001). Lagrangian modeling of agglomeration during spray drying processes. In: Proceedings of the 9th International Conference on Liquid Atomization and Spray Systems.
   Google Scholar
• Spicer, A. (1974). Effects of latest developments of spray drying. In: Advances in Preconcentration and Dehydration of Foods, pp. 337–340. John Wiley and Sons Inc., New York.
   Google Scholar
• Sudhagar, M. (2000). Spray Drying of Fruit Juices. Unpublished M. Tech Thesis, Indian Institute of Technology, Kharagpur, West Bengal, India.
   Google Scholar
• Tonon, R.V., Baroni, A.F., Brabet, C., Gibert, O., Pallet, D. and Hubinger, M.D. (2009). Water sorption and glass transition temperature of spray dried açai (Euterpe oleracea Mart.) juice. J. Food Eng. 94:215–221.
   Web of Science ®Google Scholar
• Tonon, R.V., Brabet, C. and Hubinger, M.D. (2008). Influence of process conditions on the physicochemical properties of acai (Euterpe oleraceae Mart.) powder produced by spray drying. J. Food Eng. 88:411–418.
   Web of Science ®Google Scholar
• Tonon, R.V., Brabet, C. and Hubinger, M.D. (2010). Anthocyanin stability and antioxidant activity of spray-dried açai (Euterpe oleracea Mart.) juice produced with different carrier agents. Food Res. Int. 43:907–914.
   Web of Science ®Google Scholar
• Tsourouflis, S., Flink, J.M. and Karel, M. (1976). Loss of structure in freeze-dried carbohydrates solutions: Effect of temperature, moisture content and composition. J. Sci. Food Agricult. 27:509–519.
   Web of Science ®Google Scholar
• Van der Lijn, J., Kerkhof, P.J. A. M. and Rulkens, W.H. (1972). Droplet heat and mass transfer under spray-drying conditions. In: Proceedings of the International Symposium on Heat and Mass Transfer Problems in Food Engineering. Wageningen, The Netherlands, Paper F3.
   Google Scholar
• Vardin, H. and Yasar, M. (2012). Optimisation of pomegranate (Punica Granatum L.) juice spray-drying as affected by temperature and maltodextrin content. Int. J. Food Sci. Technol. 47:167–176.
   Web of Science ®Google Scholar
• Wagner, L.A. and Warthesen, J. (1995). Stability of spray-dried encapsulated carrot carotenes. J. Food Sci. 60(5):1048–1053.
   Web of Science ®Google Scholar
• Wallack, D.A. and King, C.J. (1988). Sticking and agglomeration of hygroscopic, amorphous carbohydrate and food powders. Biotechnol. Progress 4(1):31–35.
   Web of Science ®Google Scholar
• Wang, S. and Langrish, T. (2008). A review of process simulations and the use of additives in spray drying. Food Res. Int. 42:13–25.
   Web of Science ®Google Scholar
• Whistler, R.L. (1998). Banana starch production. US Patent 5797985, 2p.
   Google Scholar
• Yamashita, F., Benassi, M.T., Tonzar, A.C., Moriya, S. and Fernandes, J.G. (2003). Produtos de acerola: Estudo da estabilidade de vitamina C. Ciência e Tecnologia de Alimentos 23(1):92–94.
   Google Scholar
• Yogeshwer, S. and Madhulika, S. (2007). Cancer preventive properties of ginger: A brief review. J. Food Sci. 45:683–690.
   Google Scholar
• Yu, L. (2001). Amorphous pharmaceutical solids: Preparation, characterization and stabilization. Int. J. Pharmaceutics 48:27–42.
   Google Scholar
• Zhang, L., Mou, D. and Du, Y. (2007). Procyanidins: Extraction and microencapsulation. J. Agricult. Food Chem. 87:2192–2197.
   Web of Science ®Google Scholar