References
- Andreassen, R. C., M. E. Pedersen, K. A. Kristoffersen, and S. Beate Rønning. 2020. Screening of by-products from the food industry as growth promoting agents in serum-free media for skeletal muscle cell culture. Food & Function 11 (3):2477–88. doi: https://doi.org/10.1039/c9fo02690h.
- Ben-Arye, T., and S. Levenberg. 2019. Tissue engineering for clean meat production. Frontiers in Sustainable Food Systems 3: 1-19. doi: https://doi.org/10.3389/fsufs.2019.00046.
- Ben-Arye, T., Y. Shandalov, S. Ben-Shaul, S. Landau, Y. Zagury, I. Ianovici, N. Lavon, and S. Levenberg. 2020. Textured soy protein scaffolds enable the generation of three-dimensional bovine skeletal muscle tissue for cell-based meat. Nature Food 1 (4):210–20. doi: https://doi.org/10.1038/s43016-020-0046-5.
- Bhat, Z. F., H. Bhat, and S. Kumar. 2020. Chapter 73 – cultured meat—a humane meat production system. In Principles of Tissue Engineering, edited by Robert Lanza, Robert Langer, Joseph P Vacanti, and Anthony B T Atala, fifth ed., 1369–88. Academic Press.
- Bhat, Z. F., S. Kumar, and H. F. Bhat. 2017. In vitro meat: A future animal-free harvest. Critical Reviews in Food Science and Nutrition 57 (4):782–89. doi: https://doi.org/10.1080/10408398.2014.924899.
- Bhat, Z. F., S. Kumar, and H. Fayaz. 2015. In vitro meat production: Challenges and benefits over conventional meat production. Journal of Integrative Agriculture 14 (2):241–8. doi: https://doi.org/10.1016/S2095-3119(14)60887-X.
- Bhat, Z. F., J. D. Morton, S. L. Mason, A. E.-D A. Bekhit, and H. F. Bhat. 2019. Technological, regulatory, and ethical aspects of in vitro meat: A future slaughter-free harvest. Comprehensive Reviews in Food Science and Food Safety 18 (4):1192–208. doi: https://doi.org/10.1111/1541-4337.12473.
- Bonnedahl, K. J., and P. Heikkurinen. 2018. The Case for Strong Sustainability. In Strongly sustainable societies: organising human activities on a hot and full Earth, 1–20. Routledge. doi: https://doi.org/10.4324/9781351173643.
- Bryant, C., and J. Barnett. 2018. Consumer acceptance of cultured meat: A systematic review. Meat Science 143:8–17. doi: https://doi.org/10.1016/j.meatsci.2018.04.008.
- Carlota, V. 2019. Aleph farms and 3D bioprinting solutions collaborate to create slaughter-free meat. 3Dnatives 2019.
- Choudhury, D., S. Anand, and M. W. Naing. 2018. The arrival of commercial bioprinters - towards 3D bioprinting revolution! International Journal of Bioprinting 4 (2):1–20. doi: https://doi.org/10.18063/ijb.v4i2.139.
- Cidonio, G., M. Glinka, J. I. Dawson, and R. O. C. Oreffo. 2019. The cell in the ink: Improving biofabrication by printing stem cells for skeletal regenerative medicine. Biomaterials 209 (July): :10–24. doi: https://doi.org/10.1016/j.biomaterials.2019.04.009.
- Datar, I., and M. Betti. 2010. Possibilities for an in vitro meat production system. Innovative Food Science & Emerging Technologies 11 (1):13–22. https://doi.org/https://doi.org/10.1016/j.ifset.2009.10.007. doi: https://doi.org/10.1016/j.ifset.2009.10.007.
- Dessels, C., M. Potgieter, and M. S. Pepper. 2016. Making the switch: Alternatives to fetal bovine serum for adipose-derived stromal cell expansion. Frontiers in Cell and Developmental Biology 4 (October): :115. doi: https://doi.org/10.3389/fcell.2016.00115.
- Dick, A.,B. Bhandari, andS. Prakash. 2019. 3D printing of meat. Meat Science 153:35–44. doi:https://doi.org/10.1016/j.meatsci.2019.03.005.
- Dick, A., B. Bhandari, and S. Prakash. 2019a. 3D Printing of meat. Meat Sci 153:35–44. doi: https://doi.org/10.1016/j.meatsci.2019.03.005.
- Dick, A., B. Bhandari, and S. Prakash. 2019b. Post-processing feasibility of composite-layer 3D printed beef. Meat Science 153:9–18. doi: https://doi.org/10.1016/j.meatsci.2019.02.024.
- Forcina, L., C. Miano, L. Pelosi, and A. Musarò. 2019. An overview about the biology of skeletal muscle satellite cells. Current Genomics 20 (1):24–37. doi: https://doi.org/10.2174/1389202920666190116094736.
- Gaydhane, M. K., U. Mahanta, C. S. Sharma, M. Khandelwal, and S. Ramakrishna. 2018. Cultured meat: State of the art and future. Biomanufacturing Reviews 3 (1):1. doi: https://doi.org/10.1007/s40898-018-0005-1.
- Gudjónsdóttir, M., R. J. Napitupulu, and H. T. Petty Kristinsson. 2019. Low field NMR for quality monitoring of 3D printed surimi from Cod by-products: Effects of the ph-shift method compared with conventional washing. Magnetic Resonance in Chemistry : MRC 57 (9):638–48. doi: https://doi.org/10.1002/mrc.4855.
- Gungor-Ozkerim, P. S., I. Inci, Y. S. Zhang, A. Khademhosseini, and M. R. Dokmeci. 2018. Bioinks for 3D bioprinting: An overview. Biomaterials Science 6 (5):915–46. doi: https://doi.org/10.1039/c7bm00765e.
- Jovic, T. H., G. Kungwengwe, A. C. Mills, and I. S. Whitaker. 2019. Plant-derived biomaterials: A review of 3D bioprinting and biomedical applications. Frontiers in Mechanical Engineering 5: 1-18. doi: https://doi.org/10.3389/fmech.2019.00019.
- Kačarević, Ž. P., P. M. Rider, S. Alkildani, S. Retnasingh, R. Smeets, O. Jung, Z. Ivanišević, and M. Barbeck. 2018. An introduction to 3D bioprinting: possibilities, challenges and future aspects. Materials ( Materials 11 (11):2199. doi: https://doi.org/10.3390/ma11112199.
- Kadim, I. T., O. Mahgoub, S. Baqir, B. Faye, and R. Purchas. 2015. Cultured meat from muscle stem cells: A review of challenges and prospects. Journal of Integrative Agriculture 14 (2):222–33. doi: https://doi.org/10.1016/S2095-3119(14)60881-9.
- Kahan, S., J. Camphuijsen, C. Cannistra, G. Potter, Z. Consenza, and I. Shmulevich. 2019. “Cultivated Meat Modeling Consortium: Inaugural Meeting Whitepaper.” Authorea, Inc. https://doi.org/10.22541/au.158057683.31004563.
- Kengla, C., E. Renteria, C. Wivell, A. Atala, J. J. Yoo, and S. J. Lee. 2017. Clinically relevant bioprinting workflow and imaging process for tissue construct design and validation. 3D Printing and Additive Manufacturing 4 (4):239–47. doi: https://doi.org/10.1089/3dp.2017.0075.
- Kesti, Matti, Philipp Fisch, Marco Pensalfini, Edoardo Mazza, and Marcy Zenobi-Wong. 2016. Guidelines for standardization of bioprinting: A systematic study of process parameters and their effect on bioprinted structures. BioNanoMaterials 17 (3–4). De Gruyter: 193–204. doi: https://doi.org/10.1515/bnm-2016-0004.
- Kolkmann, A. M., M. J. Post, M. A. M. Rutjens, A. L. M. van Essen, and P. Moutsatsou. 2020. Serum-free media for the growth of primary bovine myoblasts. Cytotechnology 72 (1):111–20. doi: https://doi.org/10.1007/s10616-019-00361-y.
- Kreis, K., S. Zobrist, M. E. Parker, K. Kinderknecht, N. Perez, C. Ringler, and, Et Al. 2019. “Cultured Proteins: An Analysis of the Policy and Regulatory Environment in Selected Geographies,” no. October.
- Li, X., G. Zhang, X. Zhao, J. Zhou, G. Du, and J. Chen. 2020. A conceptual air-lift reactor design for large scale animal cell cultivation in the context of in vitro meat production. Chemical Engineering Science 211:115269 doi: https://doi.org/10.1016/j.ces.2019.115269.
- Liu, Z., M. Zhang, and C-h. Yang. 2018. Dual extrusion 3D printing of mashed potatoes/strawberry juice gel. LWT 96:589–96. doi: https://doi.org/10.1016/j.lwt.2018.06.014.
- MacQueen, L. A., C. G. Alver, C. O. Chantre, S. Ahn, L. Cera, G. M. Gonzalez, B. B. O'Connor, D. J. Drennan, M. M. Peters, S. E. Motta, et al. 2019. Muscle tissue engineering in fibrous gelatin: Implications for meat analogs. NPJ Science of Food 3 (1):20. doi: https://doi.org/10.1038/s41538-019-0054-8.
- Narayanan, N.,. C. Jiang, C. Wang, G. Uzunalli, N. Whittern, D. Chen, O. G. Jones, S. Kuang, and M. Deng. 2020. Harnessing fiber diameter-dependent effects of myoblasts toward biomimetic scaffold-based skeletal muscle regeneration. Front Bioeng Biotechnol 8 (March): :203. doi: https://doi.org/10.3389/fbioe.2020.00203.
- Noorani, R. 2017. 3D Printing: Technology, Applications, and Selection. 1st ed. Boca Raton: CRC Press. doi: https://doi.org/10.1201/9781315155494.
- Olivares, A. L., and D. Lacroix. 2013. Computational methods in the modeling of scaffolds for tissue engineering bt. In Computational modeling in tissue engineering, edited by Liesbet Geris, 107–26. Berlin, Heidelberg: Springer Berlin Heidelberg.
- Ong, S., D. Choudhury, and M. W. Naing. 2020. Cell-based meat: Current ambiguities with nomenclature. Trends in Food Science & Technology 102:223–31. doi: https://doi.org/10.1016/j.tifs.2020.02.010.
- Pessôa, L. V. d F., F. F. Bressan, and K. K. Freude. 2019. Induced pluripotent stem cells throughout the Animal Kingdom: Availability and applications. World J Stem Cells 11 (8):491–505. doi: https://doi.org/10.4252/wjsc.v11.i8.491.
- Petetin, L. 2014. Frankenburgers, risks and approval. European Journal of Risk Regulation 5 (2):168–86. doi: https://doi.org/10.1017/S1867299X00003585.
- Placone, J. K., and A. J. Engler. 2018. Recent advances in extrusion-based 3D printing for biomedical applications. Advanced Healthcare Materials 7 (8):e1701161. doi: https://doi.org/10.1002/adhm.201701161.
- Poldervaart, M. T., H. Gremmels, K. van Deventer, J. O. Fledderus, F. C. Oner, M. C. Verhaar, W. J. A. Dhert, and J. Alblas. 2014. Prolonged presence of VEGF promotes vascularization in 3D bioprinted scaffolds with defined architecture. Journal of Control Release 184 (June): :58–66. doi: https://doi.org/10.1016/j.jconrel.2014.04.007.
- Portanguen, S., P. Tournayre, J. Sicard, T. Astruc, and P.-S. Mirade. 2019. Toward the design of functional foods and biobased products by 3D printing: A review. Trends in Food Science & Technology 86:188–98. doi: https://doi.org/10.1016/j.tifs.2019.02.023.
- Ritchie, H., and M. Roser. 2017. Meat and Dairy Production. Our World in Data, 1–35. https://ourworldindata.org/meat-production.
- Roberts, R. M., Y. Yuan, N. Genovese, and T. Ezashi. 2015. Livestock models for exploiting the promise of pluripotent stem cells. ILAR Journal 56 (1):74–82. doi: https://doi.org/10.1093/ilar/ilv005.
- Rolland, N. C. M., C. R. Markus, and M. J. Post. 2020. The effect of information content on acceptance of cultured meat in a tasting context. Plos ONE 15 (4):e0231176doi: https://doi.org/10.1371/journal.pone.0231176.
- Rorheim, A., A. Mannino, T. Baumann, and L. Caviola. 2016. “Cultured Meat: An Ethical Alternative to Industrial Animal Farming,” 1–22. https://sentience-politics.org/files/cultured-meat-revision.pdf
- Seol, Y.-J., H.-W. Kang, S. J. Lee, A. Atala, and J. J. Yoo. 2014. Bioprinting technology and its applications. European Journal of Cardio-Thoracic Surgery 46 (3):342–8. doi: https://doi.org/10.1093/ejcts/ezu148.
- Sharma, S., S. Singh Thind, and A. Kaur. 2015. In vitro meat production system: Why and how? J Food Sci Technol 52 (12):7599–607. doi: https://doi.org/10.1007/s13197-015-1972-3.
- Sher, D., and Tutó, X. 2015. Review of 3D food printing. Temes de Disseny 0 (31):104–17. https://raco.cat/index.php/Temes/article/view/299596.
- Siegrist, M., and C. Hartmann. 2020. Consumer acceptance of novel food technologies. Nature Food 1 (6):343–50. doi: https://doi.org/10.1038/s43016-020-0094-x.
- Simonacci, F., N. Bertozzi, M. P. Grieco, and E. Raposio. 2019. From liposuction to adipose-derived stem cells: Indications and technique. Acta Bio-Medica : Atenei Parmensis 90 (2):197–208. doi: https://doi.org/10.23750/abm.v90i2.6619.
- Specht, E. A., D. R. Welch, E. M. Rees Clayton, and C. D. Lagally. 2018. Opportunities for applying biomedical production and manufacturing methods to the development of the clean meat industry. Biochemical Engineering Journal 132:161–8. doi: https://doi.org/10.1016/j.bej.2018.01.015.
- Stephens, N., L. Di Silvio, I. Dunsford, M. Ellis, A. Glencross, and A. Sexton. 2018. Bringing cultured meat to market: Technical, socio-political, and regulatory challenges in cellular agriculture. Trends in Food Science & Technology 78:155–66. doi: https://doi.org/10.1016/j.tifs.2018.04.010.
- Stephens, N., A. E. Sexton, and C. Driessen. 2019. Making sense of making meat: Key moments in the first 20 years of tissue engineering muscle to make food. Frontiers in Sustainable Food Systems 3: 1-16. doi: https://doi.org/10.3389/fsufs.2019.00045.
- Sun, J., W. Zhou, L. Yan, D. Huang, and L-y. Lin. 2018. Extrusion-based food printing for digitalized food design and nutrition control. Journal of Food Engineering 220:1–11. doi: https://doi.org/10.1016/j.jfoodeng.2017.02.028.
- Vialva, T. 2019. “Redefine meat raises $6 million to advance food 3D printing technology.” 2019. https://3dprintingindustry.com/news/redefine-meat-raises-6-million-to-advance-food-3d-printing-technology-161580/.
- Wankhade, U. D., M. Shen, R. Kolhe, and S. Fulzele. 2016. Advances in adipose-derived stem cells isolation, characterization, and application in regenerative tissue engineering. Stem Cells International 2016:3206807. doi: https://doi.org/10.1155/2016/3206807.
- Weele, C., van der Feindt, P., Jan van der Goot, A., van Mierlo, B., and van Boekel, M. 2019. Meat alternatives: An integrative comparison. Trends in Food Science & Technology 88:505–12. doi: https://doi.org/10.1016/j.tifs.2019.04.018.
- Welin, S. 2013. Introducing the new meat. Problems and prospects. Etikk i Praksis 7 (1): 24–37. doi: https://doi.org/10.5324/eip.v7i1.1788.
- Zhang, Y. S., R. Oklu, M. R. Dokmeci, and A. Khademhosseini. 2018. Three-dimensional bioprinting strategies for tissue engineering. Cold Spring Harbor Perspectives in Medicine 8 (2):a025718. doi: https://doi.org/10.1101/cshperspect.a025718.
- Zhang, Y. S. K., Yue, J. Aleman, K. M. Moghaddam, S. M. Bakht, J. Yang, W. Jia, V. Dell'Erba, P. Assawes, S. R. Shin, et al. 2017. 3D Bioprinting for tissue and organ fabrication. Ann Biomed Eng 45 (1):148–63. doi: https://doi.org/10.1007/s10439-016-1612-8.