Amorphous Coatings and Surfaces on Structural Materials

REFERENCES

• W. Klement, R. Willens, and P. Duwez, Non-crystalline structure in solidified gold-silicon alloys, Nature 187, 869–870 (1960).
   Web of Science ®Google Scholar
• H. W. Kui, A. L. Greer, and D. Turnbull, Formation of bulk metallic glass by fluxing, Appl. Phys. Lett. 45 (1984).
   Web of Science ®Google Scholar
• A. Inoue, Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Materialia 48, 279–306 (2000).
   Web of Science ®Google Scholar
• W. H. Wang, C. Dong, and C. H. Shek, Bulk metallic glasses, Mater. Sci. Eng. R Rep. 44, 45–89 (2004).
   Web of Science ®Google Scholar
• J. Schroers, Q. Pham, and A. Desai, Thermoplastic forming of bulk metallic glass mdash; a technology for mems and microstructure fabrication, Microelectromech. Syst. J. 16, 240–247 (2007).
   Web of Science ®Google Scholar
• M. Chen, Mechanical behavior of metallic glasses: Microscopic understanding of strength and ductility, Ann. Rev. Mater. Res. 38, 445–469 (2008).
   Web of Science ®Google Scholar
• M. Mille and P. Liaw Eds., Bulk Metallic Glasses, Springer US, 2008.
   Google Scholar
• A. Peker and W. L. Johnson, A highly processable metallic glass: Zr41.2Ti13.8Cu12.5Ni10.0Be22.5, Appl. Phys. Lett. 63 (1993).
   Web of Science ®Google Scholar
• M. Telford, The case for bulk metallic glass, Mater. Today 7, 36–43 (2004).
   Web of Science ®Google Scholar
• A. Inoue, T. Zhang, and T. Masumoto, Glass-forming ability of alloys, J. Non-Crystal. Solids 156-158, Part 2, 473–480 (1993).
   Web of Science ®Google Scholar
• A. Inoue, High strength bulk amorphous alloys with low critical cooling rates (overview), Mater. Trans. 36, 866–875 (1995).
   Web of Science ®Google Scholar
• A. Inoue and T. Benameur, Crystallization kinetics of al-base amorphous alloys, Mater. Sci. For. 179, 813–826 (1995).
   Google Scholar
• J. R. Greer and J. Th. M. De Hosson, Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect, Progr. Mater. Sci. 56, 654–724 (2011).
   Web of Science ®Google Scholar
• S. Banerjee and P. Mukhopadhyay, Phase Transformations: Examples from Titanium and Zirconium Alloys, Elsevier, Oxford, UK (1993).
   Google Scholar
• B. Zheng, Synthesis and behavior of metallic glasses via gas atomization and laser deposition, Ph.D. thesis, UC Davis, 2006.
   Google Scholar
• D. A. Porter and K. E. Easterling, Phase Transformations in Metals and Alloys (Revised Reprint), CRC Press, Boca Raton, FL, 1992.
   Google Scholar
• W. M. Steen, J. Mazumder, and K. G. Watkins, Laser Material Processing, Springer, London, UK 2003.
   Google Scholar
• H. Yoshioka, K. Asami, A. Kawashima, and K. Hashimoto, Laser- processed corrosion-resistant amorphous Ni-Cr-P-B surface alloys on a mild steel, Corros. Sci. 27, 981–995 (1987).
   Web of Science ®Google Scholar
• E. S. Park and D. H. Kim, Design of bulk metallic glasses with high glass forming ability and enhancement of plasticity in metallic glass matrix composites: A review, Metals Mater. Int. 11, 19–27 (2005).
   Web of Science ®Google Scholar
• S. Guo and C. T. Liu, New glass forming ability criterion derived from cooling consideration, Intermetallics 18, 2065–2068 (2010).
   Web of Science ®Google Scholar
• Z. P. Lu and C. T. Liu, A new glass-forming ability criterion for bulk metallic glasses, Acta Materialia 50, 3501–3512 (2002).
   Web of Science ®Google Scholar
• X. H. Du, J. C. Huang, C. T. Liu, and Z. P. Lu, New criterion of glass forming ability for bulk metallic glasses, J. Appl. Phy. 101, 86 (2007).
   Google Scholar
• G. Yang, X. Lin, F. Liu, Q. Hu, L. Ma, J. Li, and W. Huang, Laser solid forming Zr-based bulk metallic glass, Intermetallics 22, 110–115 (2012).
   Web of Science ®Google Scholar
• D.T.A. Matthews, V. OcelÃŋ k, and J.Th.M. de Hosson, Tribological and mechanical properties of high power laser surface-treated metallic glasses, Mater. Sci. Eng. A 471, 155–164 (2007).
   Web of Science ®Google Scholar
• D. T. A. Matthews, V. OcelÃŋk, and J. Th. M. de Hosson, Scratch test induced shear banding in high power laser remelted metallic glass layers, J. Mater. Res. 22, 460–470 (2007).
   Web of Science ®Google Scholar
• B. Zheng, Y. Zhou, J. E. Smugeresky, and E. J. Lavernia, Processing and behavior of Fe-based metallic glass components via laser-engineered net shaping, Metallur. Mater. Trans. A 40, 1235–1245 (2009).
   Web of Science ®Google Scholar
• H. Sahasrabudhe, S. A. Dittrick, and A. Bandyopadhyay, Laser processing of fe-based bulk amorphous alloy coatings on titanium, Metallur. Mater. Trans. A 44, 4914–4926 (2013).
   Web of Science ®Google Scholar
• H. Sun and K. M. Flores, Laser deposition of a Cu-based metallic glass powder on a Zr-based glass substrate, J. Mater. Res. 23, 2692–2703 (2008).
   Web of Science ®Google Scholar
• H. Sun and K. M. Flores, Microstructural analysis of a laser-processed Zr-based bulk metallic glass, Metallur. Mater. Trans. A 41, 1752–1757 (2010).
   Web of Science ®Google Scholar
• S. Katakam, J. Y. Hwang, S. Paital, R. Banerjee, H. Vora, and N. B. Dahotre, In situ laser synthesis of fe-based amorphous matrix composite coating on structural steel, Metallur. Mater. Trans. A 43, 4957–4966 (2012).
   Web of Science ®Google Scholar
• Q. Zhu, S. Qu, X. Wang, and Z. Zou, Synthesis of Fe-based amorphous composite coatings with low purity materials by laser cladding, Appl. Surf. Sci. 253, 7060–7064 (2007).
   Web of Science ®Google Scholar
• D. T. A. Matthews, V. OcelÃŋk, D. Branagan, and J. Th. M. de Hosson, Laser engineered surfaces from glass forming alloy powder precursors: Microstructure and wear, Surf. Coat. Technol. 203, 1833–1843 (2009).
   Web of Science ®Google Scholar
• Y. Zhu, Z. Li, J. Huang, M. Li, R. Li, and Y. Wu, Amorphous structure evolution of high power diode laser cladded Fe-Co-B-Si-Nb coatings, Appl. Surf. Sci. 261, 896–901 (2012).
   Web of Science ®Google Scholar
• P. Zhang, H. Yan, P. Xu, Z. Yu, and C. Li, Microstructure and tribological behavior of amorphous and crystalline composite coatings using laser melting, Appl. Surf. Sci. 258, 6902–6908 (2012).
   Web of Science ®Google Scholar
• A. Basu, A. N. Samant, S. P. Harimkar, J. D. Majumdar, I. Manna, and N. B. Dahotre, Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glass composition on {AISI} 4140 steel, Surf. Coat. Technol. 202, 2623–2631 (2008).
   Web of Science ®Google Scholar
• R. Li, Z. Li, J. Huang, and Y. Zhu, Dilution effect on the formation of amorphous phase in the laser cladded Ni-Fe-B-Si-Nb coatings after laser remelting process, Appl. Surf. Sci. 258, 7956–7961 (2012).
   Web of Science ®Google Scholar
• B. Chen, Y. Li, Y. Cai, R. Li, S. Pang, and T. Zhang, Surface vitrification of alloys by laser surface treatment, J. Alloy. Comp. 511, 215–220 (2012).
   Web of Science ®Google Scholar
• B. Chen, Y. Li, M. Yi, R. Li, S. Pang, H. Wang, and T. Zhang, Optimization of mechanical properties of bulk metallic glasses by residual stress adjustment using laser surface melting, Scripta Materialia 66, 1057–1060 (2012).
   Web of Science ®Google Scholar
• B. Chen, S. Pang, P. Han, Y. Li, A. R. Yavari, G. Vaughan, and T. Zhang, Improvement in mechanical properties of a Zr-based bulk metallic glass by laser surface treatment, J. Alloy. Comp. 504, Supplement 1, S45–S47 (2010). 16th International Symposium on Metastable, Amorphous and Nanostructured Materials.
   Google Scholar
• N. H. Tariq, B. A. Hasan, and J. I. Akhter, Evolution of microstructure in Zr55Cu30Al10Ni5 bulk amorphous alloy by high power pulsed nd:yag laser, J. Alloy. Comp. 485, 212–214 (2009).
   Web of Science ®Google Scholar
• M. Sveda and A. Rosz, Development of amorphous and microstructured surface layer by laser surface treatment, Mater. Sci. Forum 752, 175–182 (2013).
   Google Scholar
• D. Carvalho, S. Cardoso, and R. Vilar, Amorphisation of Zr60Al15Ni25 surface layers by laser processing for corrosion resistance, Scripta Materialia 37, 523–527 (1997).
   Web of Science ®Google Scholar
• S. Katakam, J. Y. Hwang, H. Vora, S. P. Harimkar, R. Banerjee, and N. B. Dahotre, Laser-induced thermal and spatial nanocrystallization of amorphous Fe-Si-B alloy, Scripta Materialia 66, 538–541 (2012).
   Web of Science ®Google Scholar
• S. Katakam, S. Santhanakrishnan, H. Vora, J. Y. Hwang, R. Banerjee, and N. B. Dahotre, Stress-induced selective nano-crystallization in laser-processed amorphous Fe-Si-B alloys, Philosoph. Maga. Lett. 92, 617–624 (2012).
   Web of Science ®Google Scholar
• K. Shravana, D. Arun, B. Mark, S. Santhanakrishnan, S. Casey, R. V. Ramanujan, T. Suntharampillai, B. Rajarshi, and N. B. Dahotre, Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study, J. Appl. Phys. 114 (2013).
   Web of Science ®Google Scholar
• S. P. Harimkar, S. R. Paital, G. Wang, P. K. Liaw, and N. B. Dahotre, Periodically laser patterned Fe − Si − B amorphous ribbons: Phase evolution and mechanical behavior, Adv. Eng. Mater. 13(10), 955–960 (2011).
   Web of Science ®Google Scholar
• G. Wu, R. Li, Z. Liu, B. Chen, Y. Li, Y. Cai, and T. Zhang, Induced multiple heterogeneities and related plastic improvement by laser surface treatment in CuZr-based bulk metallic glass, Intermetallics 24, 50–55 (2012).
   Web of Science ®Google Scholar
• S. Katakam, A. Devaraj, M. Bowden, S. Santhanakrishnan, C. Smith, R. V. Ramanujan, S. Thevuthasan, R. Banerjee, and N. B. Dahotre, Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study, J. Appl. Phys. 114 (2013).
   Web of Science ®Google Scholar
• J. R. Davis, Handbook of Thermal Spray Technology, ASM International, Materials Park, OH, USA 2004.
   Google Scholar
•   ASM International. Handbook Committee. Surface Engineering, volume 5. ASM International, Materials Park, OH, USA 1994.
   Google Scholar
• D. Zois, A. Lekatou, and M. Vardavoulias, Preparation and characterization of highly amorphous HVOF stainless steel coatings, J. Alloy. Comp. 504, S283–S287 (2010).
   Google Scholar
• H. S. Ni, X. H. Liu, X. C. Chang, W. L. Hou, W. Liu, and J. Q. Wang, High performance amorphous steel coating prepared by {HVOF} thermal spraying, J. Alloy. Comp. 467, 163–167 (2009).
   Web of Science ®Google Scholar
• Z. Zhou, L. Wang, D. Y. He, F. C. Wang, and Y. B. Liu, Microstructure and wear resistance of Fe-based amorphous metallic coatings prepared by hvof thermal spraying, J. Therm. Spray Technol. 19, 1287–1293 (2010).
   Web of Science ®Google Scholar
• Y. Wu, P. Lin, Z. Wang, and G. Li, Microstructure and microhardness characterization of a Fe-based coating deposited by high-velocity oxy-fuel thermal spraying, J. Alloy. Comp. 481, 719–724 (2009).
   Web of Science ®Google Scholar
• C. Zhang, K. C. Chan, Y. Wu, and L. Liu, Pitting initiation in fe-based amorphous coatings, Acta Materialia 60, 4152–4159 (2012).
   Web of Science ®Google Scholar
• A. Rabiei, D. R. Mumm, J. W. Hutchinson, R. Schweinfest, M. RÃijhle, and A. G. Evans, Microstructure, deformation and cracking characteristics of thermal spray ferrous coatings, Mater. Sci. Eng. A 269, 152–165 (1999).
   Web of Science ®Google Scholar
• Z. Zhou, L. Wang, F. C. Wang, H. F. Zhang, Y. B. Liu, and S. H. Xu, Formation and corrosion behavior of Fe-based amorphous metallic coatings by {HVOF} thermal spraying, Surf. Coat. Technol. 204, 563–570 (2009).
   Web of Science ®Google Scholar
• K. Chokethawai, D. G. McCartney, and P. H. Shipway, Microstructure evolution and thermal stability of an Fe-based amorphous alloy powder and thermally sprayed coatings, J. Alloy. Comp. 480, 351–359 (2009).
   Web of Science ®Google Scholar
• T. Terajima, F. Takeuchi, K. Nakata, S. Adachi, K. Nakashima, and T. Igarashi, Composite coating containing WC/12Co cermet and Fe-based metallic glass deposited by high-velocity oxygen fuel spraying, J. Alloy. and Comp. 504, S288–S291 (2010).
   Web of Science ®Google Scholar
• W. D. Liu, K. X. Liu, Q. Y. Chen, J. T. Wang, H. H. Yan, and X. J. Li, Metallic glass coating on metals plate by adjusted explosive welding technique, Appl. Surf. Sci. 255, 9343–9347 (2009).
   Web of Science ®Google Scholar
• http://www.thermalspray.com/plasma-spray-coatings/.
   Google Scholar
• A. Kobayashi, S. Yano, H. Kimura, and A. Inoue, Mechanical property of Fe-base metallic glass coating formed by gas tunnel type plasma spraying, Surf. Coat. Technol. 202, 2513–2518 (2008).
   Web of Science ®Google Scholar
• Q. Yang, R. Li, Z. Liu, M. Shi, X. Luo, and T. Zhang, Compositional dependence of microstructure and tribological properties of plasma sprayed Fe-based metallic glass coatings, Sci. China Technol. Sci. 55, 1335–1342 (2012).
   Web of Science ®Google Scholar
• A. Kobayashi, T. Kuroda, H. Kimura, and A. Inoue, Property of ni-based metallic glass coating produced by gas tunnel type plasma spraying, In: K. Ewsuk, M. Naito, T. Kakeshita, S. Kirihara, K. Uematsu, and H. Abe, Eds., Characterization and Control of Interfaces for High Quality Advanced Materials III, John Wiley & Sons, Inc, Hoboken, NJ, USA, p. 31–37.
   Google Scholar
• J. Kim, K. Kang, S. Yoon, S. Kumar, H. Na, and C. Lee, Oxidation and crystallization mechanisms in plasma-sprayed Cu-based bulk metallic glass coatings, Acta Materialia 58, 952–962 (2010).
   Web of Science ®Google Scholar
• X. Chen, B. Zhang, G. Chen, X. Hui, and X. Xing, Study on corrosion behavior of continuous bulk metallic glass-coated steel wire composite, Intermetallics 19, 1913–1918 (2011).
   Web of Science ®Google Scholar
• X. Chen, B. Zhang, G. Chen, Y. Zhang, X. Hui, Z. Lu, X. Liu, Y. Xu, and X. Xing, Continuously manufacturing of bulk metallic glass-coated wire composite, Intermetallics 18, 2034–2038 (2010).
   Web of Science ®Google Scholar
• K. Lee, D.-H. Nam, S. Lee, and N. J. Kim, Hardness and wear resistance of Zr-based bulk metallic glass/ti surface composites fabricated by high-energy electron beam irradiation, Surf. Coat. Technol. 201, 1620–1628 (2006).
   Web of Science ®Google Scholar
• W. Chen, K. C. Chan, S. F. Guo, and P. Yu, Plasticity improvement of an fe-based bulk metallic glass by geometric confinement, Mater. Lett. 65, 1172–1175 (2011).
   Web of Science ®Google Scholar
• J. P. Chu, J. E. Greene, J. S.C. Jang, J. C. Huang, Y.-L. Shen, P. K. Liaw, Y. Yokoyama, A. Inoue, and T. G. Nieh, Bendable bulk metallic glass: Effects of a thin, adhesive, strong, and ductile coating, Acta Materialia 60, 3226–3238 (2012).
   Web of Science ®Google Scholar
• Y.-J. Kim, B.-K. Kim, and J.-C. Kim, Synthesis and densification of cu-coated ni-based amorphous composite powders, Mater. Sci. Eng. A 449-451, 1071–1074 (2007).
   Web of Science ®Google Scholar
• P. H. Tsai, Y. Z. Lin, J. B. Li, S. R. Jian, J. S. C. Jang, C. Li, J. P. Chu, and J. C. Huang, Sharpness improvement of surgical blade by means of zrcualagsi metallic glass and metallic glass thin film coating, Intermetallics 31, 127–131 (2012).
   Web of Science ®Google Scholar
• L. Ajdelsztajn, E. J. Lavernia, B. Jodoin, P. Richer, and E. Sansoucy, Cold gas dynamic spraying of iron-base amorphous alloy, J. Therm. Spray Technol. 15, 495–500 (2006).
   Web of Science ®Google Scholar
• S. Yoon, G. Bae, Y. Xiong, S. Kumar, K. Kang, J.-J. Kim, and C. Lee, Strain-enhanced nanocrystallization of a CuNiTiZr bulk metallic glass coating by a kinetic spraying process, Acta Materialia 57, 6191–6199 (2009).
   Web of Science ®Google Scholar
• H. Choi, S. Yoon, G. Kim, H. Jo, and C. Lee, Phase evolutions of bulk amorphous NiTiZrSiSn feedstock during thermal and kinetic spraying processes, Scripta Materialia 53, 125–130 (2005).
   Web of Science ®Google Scholar
• G. Bae, Y. Xiong, S. Kumar, K. Kang, and C. Lee, General aspects of interface bonding in kinetic sprayed coatings, Acta Materialia 56, 4858–4868 (2008).
   Web of Science ®Google Scholar
• L. Liu and C. Zhang, Fe-based amorphous coatings: Structures and properties, Thin Solid Films 561, 70–86 (2014).
   Web of Science ®Google Scholar
• Y. Huang, Y. Guo, H. Fan, and J. Shen, Synthesis of Fe–Cr–Mo–C–B amorphous coating with high corrosion resistance, Mater. Lett. 89, 229–232 (2012).
   Web of Science ®Google Scholar
• G. Liu, Y. An, Z. Guo, J. Chen, G. Hou, and J. Chen, Structure and corrosion behavior of iron-based metallic glass coatings prepared by LPPS, Appl. Surf. Sci. 258, 5380–5386 (2012).
   Web of Science ®Google Scholar
• R. Q. Guo, C. Zhang, Q. Chen, Y. Yang, N. Li, and L. Liu, Study of structure and corrosion resistance of Fe-based amorphous coatings prepared by {HVAF} and {HVOF}, Corros. Sci. 53, 2351–2356 (2011).
   Web of Science ®Google Scholar
• Y. Wang, S. L. Jiang, Y. G. Zheng, W. Ke, W. H. Sun, and J. Q. Wang, Effect of porosity sealing treatments on the corrosion resistance of high-velocity oxy-fuel (HVOF)-sprayed Fe-based amorphous metallic coatings, Surf. Coat. Technol. 206, 1307–1318 (2011).
   Web of Science ®Google Scholar
• Y. Wang, Y. G. Zheng, W. Ke, W. H. Sun, W. L. Hou, X. C. Chang, and J. Q. Wang, Slurry erosion-corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings for marine pump in sand-containing NaCl solutions, Corros. Sci. 53, 3177–3185 (2011).
   Web of Science ®Google Scholar
• D. Zois, A. Lekatou, and M. Vardavoulias, Preparation and characterization of highly amorphous hvof stainless steel coatings, J. Alloy. Comp. 504(Supplement 1), S283–S287 (2010).
   Google Scholar
• X. Q. Liu, Y. G. Zheng, X. C. Chang, W. L. Hou, J. Q. Wang, Z. Tang, and A. Burgess, Microstructure and properties of fe-based amorphous metallic coating produced by high velocity axial plasma spraying, J. Alloy. Comp. 484, 300–307 (2009).
   Web of Science ®Google Scholar
• A. P. Wang, Z. M. Wang, J. Zhang, and J. Q. Wang, Deposition of HVAF-sprayed ni-based amorphous metallic coatings, J. Alloy. Comp. 440, 225–228 (2007).
   Web of Science ®Google Scholar
• A. C. Zhao, Y. Liu, T. A. Zhang, G. Z. LÃij, and Z. H. DOU, Thermodynamics study on leaching process of gibbsitic bauxite by hydrochloric acid, Trans. Nonferr. Met. Soc. China 23, 266–270 (2013).
   Web of Science ®Google Scholar
• C. Zhang, R. Q. Guo, Y. Yang, Y. Wu, and L. Liu, Influence of the size of spraying powders on the microstructure and corrosion resistance of Fe-based amorphous coating, Electrochimica Acta 56, 6380–6388 (2011).
   Web of Science ®Google Scholar
• J. Kim, K. Kang, S. Yoon, and C. Lee, Enhancement of metallic glass properties of cu-based {BMG} coating by shroud plasma spraying, Surf. Coat. Technol. 205, 3020–3026 (2011).
   Web of Science ®Google Scholar
• J. Jayaraj, D. J. Sordelet, D. H. Kim, Y. C. Kim, and E. Fleury, Corrosion behaviour of Ni-Zr-Ti-S-Sn amorphous plasma spray coating, Corros. Sci. 48, 950–964 (2006).
   Web of Science ®Google Scholar
• B. Chen, Y. Li, Y. Cai, R. Li, S. Pang, and T. Zhang, Surface vitrification of alloys by laser surface treatment, J. Alloy. Comp. 511, 215–220 (2012).
   Web of Science ®Google Scholar
• K. J. Huang, L. Yan, C. S. Wang, C. S. Xie, and C. R. Zhou, Wear and corrosion properties of laser cladded Cu47Ti34Zr11Ni8/Sic amorphous composite coatings on {AZ91D} magnesium alloy, Trans. Nonferr. Met. Soc. China 20, 1351–1355 (2010).
   Web of Science ®Google Scholar
• R. Li, Z. Li, J. Huang, and Y. Zhu, Dilution effect on the formation of amorphous phase in the laser cladded Ni-Fe-B-Si-Nb coatings after laser remelting process, Appl. Surf. Sci. 258, 7956–7961 (2012).
   Web of Science ®Google Scholar
• R. Li, Z. Li, Y. Zhu, and K. Qi, Structure and corrosion resistance properties of Ni-Fe-B-Si-Nb amorphous composite coatings fabricated by laser processing, J. Alloy. Comp. 580, 327–331 (2013).
   Web of Science ®Google Scholar
• G. Liu, Y. An, Z. Guo, J. Chen, G. Hou, and J. Chen, Structure and corrosion behavior of iron-based metallic glass coatings prepared by {LPPS}, Appl. Surf. Sci. 258, 5380–5386 (2012).
   Web of Science ®Google Scholar
• Y. Y. Zhu, Z. G. Li, R. F. Li, M. Li, X. L. Daze, K. Feng, and Y. X. Wu, Microstructure and property of Fe-Co-B-Si-C-Nb amorphous composite coating fabricated by laser cladding process, Appl. Surf. Sci. 280, 50–54 (2013).
   Web of Science ®Google Scholar
• T. Yue and Y. P. Su, Laser multi-layer cladding of Zr65Al7.5Ni10cu17.5 amorphous alloy on magnesium substrates, J. Mater. Sci. 42, 6153–6160 (2007).
   Web of Science ®Google Scholar
• S. Katakam, S. Santhanakrishnan, and N. B. Dahotre, Fe-based amorphous coatings on aisi 4130 structural steel for corrosion resistance, JOM 64, 709–715 (2012).
   Web of Science ®Google Scholar
• T. M. Yue and Y. P. Su, Laser cladding of SiC reinforced Zr65Al7.5Ni10Cu17.5 amorphous coating on magnesium substrate, Appl. Surf. Sci. 255, 1692–1698 (2008).
   Web of Science ®Google Scholar
• S. Ningshen, U. K. Mudali, R. Krishnan, and B. Raj, Corrosion behavior of Zr-based metallic glass coating on type 304L stainless steel by pulsed laser deposition method, Surf. Coat. Technol. 205, 3961–3966 (2011).
   Web of Science ®Google Scholar
• Z. B. Zheng, Y. G. Zheng, W. H. Sun, and J. Q. Wang, Erosion-corrosion of hvof-sprayed fe-based amorphous metallic coating under impingement by a sand-containing NaCl solution, Corros. Sci. 76, 337–347 (2013).
   Web of Science ®Google Scholar
• J. C. Farmer, J. J. Haslam, S. D. Day, T. Lian, C. K. Saw, P. D. Hailey, J. S. Choi, R. B. Rebak, N. Yang, J. H. Payer, J. H. Perepezko, K. Hildal, E. J. Lavernia, L. Ajdelsztajn, D. J. Branagan, E. J. Buffa and L. F. Aprigliano, Corrosion resistance of thermally sprayed high-boron iron-based amorphous-metal coatings: Fe49.7Cr17.7Mn1.9Mo7.4W1.6B15.2C3.8Si2.4, J. mater. res. 22, 2297–2311 (2007).
   Web of Science ®Google Scholar
• K. Kishitake, H. Era, and F. Otsubo, Thermal-sprayed Fe-10C-13P-7C amorphous coatings possessing excellent corrosion resistance, J. Therm. Spray Technol. 5, 476–482 (1996).
   Web of Science ®Google Scholar
• W. L. Johnson, Bulk glass-forming metallic alloys: Science and technology, MRS Bull. 24, 42–56 (1999).
   Web of Science ®Google Scholar
• A. L. Greer, Metallic glasses, Science 267, 1947–1953 (1995).
   PubMed Web of Science ®Google Scholar
• J. Schroers, Processing of bulk metallic glass, Adv. Mater. 22, 1566–1597 (2010).
   PubMed Web of Science ®Google Scholar
• F. Spaepen, A microscopic mechanism for steady state inhomogeneous flow in metallic glasses, Acta Metallurgica 25, 407–415 (1977).
   Google Scholar
• H. Sahasrabudhe, S. A. Dittrick, and A. Bandyopadhyay, Laser processing of Fe-based bulk amorphous alloy coatings on titanium, Metallur. Mater. Trans. A 44, 4914–4926 (2013).
   Web of Science ®Google Scholar
• H. Sahasrabudhe and A. Bandyopadhyay, Laser processing of Fe based bulk amorphous alloy coating on zirconium, Surf. Coat. Technol. 240, 286–292 (2014).
   Web of Science ®Google Scholar
• R. F. Li, Z. G. Li, J. Huang, and Y. Y. Zhu, Microstructure and wear properties of laser processed ni based amorphous matrix coatings, Surf. Eng. 28, 513–516 (2012).
   Web of Science ®Google Scholar
• X. Ye and Y. C. Shin, Synthesis and characterization of Fe-based amorphous composite by laser direct deposition, Surf. Coat. Technol. 239, 34–40 (2014).
   Web of Science ®Google Scholar
• Z. Peilei, L. Yunlong, Y. Hua, M. Kai, X. Peiquan, Y. Zhishui, C. Yingying, and D. Min, Effect of nb addition on Fe-Ni-B-Si amorphous and crystalline composite coatings by laser processing, Surf. Coat. Technol. 236, 84–90 (2013).
   Web of Science ®Google Scholar
• S. Yugeswaran, A. Kobayashi, K. Suresh, K. P. Rao, and B. Subramanian, Wear behavior of gas tunnel type plasma sprayed Zr-based metallic glass composite coatings, Appl. Surf. Sci. 258, 8460–8468 (2012).
   Web of Science ®Google Scholar
• K. Suresh, S. Yugeswaran, K. P. Rao, A. Kobayashi, and P. W. Shum, Sliding wear behavior of gas tunnel type plasma sprayed Ni-based metallic glass composite coatings, Vacuum 88, 114–117 (2013).
   Web of Science ®Google Scholar
• J. B. Cheng, X. B. Liang, Z. H. Wang, and B. S. Xu, Dry sliding friction and wear properties of metallic glass coating and martensite stainless coating, Tribol. Int. 60, 140–146 (2013).
   Web of Science ®Google Scholar
• S. Yoon, J. Kim, G. Bae, B. Kim, and C. Lee, Formation of coating and tribological behavior of kinetic sprayed Fe-based bulk metallic glass, J. Alloy. Comp. 509, 347–353 (2011).
   Web of Science ®Google Scholar
• C. Zhang, L. Liu, K. C. Chan, Q. Chen, and C. Y. Tang, Wear behavior of HVOF-sprayed Fe-based amorphous coatings, Intermetallics 29, 80–85 (2012).
   Web of Science ®Google Scholar
• S. Yoon, J. Kim, B. D. Kim, and C. Lee, Tribological behavior of {B4C} reinforced fe-base bulk metallic glass composite coating, Surf. Coat. Technol. 205, 1962–1968 (2010).
   Web of Science ®Google Scholar
• Y. Y. Zhu, Z. G. Li, R. F. Li, M. Li, X. L. Daze, K. Feng, and Y. X. Wu, Microstructure and property of Fe-Co-B-Si-C-Nb amorphous composite coating fabricated by laser cladding process, Appl. Surf. Sci. 280, 50–54 (2013).
   Web of Science ®Google Scholar
• X. P. Li, M. Roberts, Y. J. Liu, C. W. Kang, H. Huang, and T. B. Sercombe, Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al–Ni–Y–Co–La metallic glass, Mater. Des. 65, 1–6 (2015).
   Web of Science ®Google Scholar
• C. Zhang, H. Zhou, and L. Liu, Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance, Acta Materialia 72, 239–251 (2014).
   Web of Science ®Google Scholar
• Y. Peng, C. Zhang, H. Zhou, and L. Liu, On the bonding strength in thermally sprayed Fe-based amorphous coatings, Surf. Coat. Technol. 218, 17–22 (2013).
   Web of Science ®Google Scholar
• P. Bansal, P. H. Shipway, and S. B. Leen, Residual stresses in high-velocity oxy-fuel thermally sprayed coatings–modelling the effect of particle velocity and temperature during the spraying process, Acta Materialia 55, 5089–5101 (2007).
   Web of Science ®Google Scholar
• C. Lyphout, P. Nylén, A. Manescu, and T. Pirling, Residual stresses distribution through thick hvof sprayed inconel 718 coatings, J. Therm. Spray Technol. 17, 915–923 (2008).
   Web of Science ®Google Scholar
• T. W. Clyne and S. C. Gill, Residual stresses in thermal spray coatings and their effect on interfacial adhesion: a review of recent work, J. Therm. Spray Technol. 5, 401–418 (1996).
   Web of Science ®Google Scholar
• P. J. Withers and H. K. D. H. Bhadeshia, Residual stress. part 1–measurement techniques, Mater. Sci. Technol. 17, 355–365 (2001).
   Web of Science ®Google Scholar
• C. A. Schuh, T. C. Hufnagel, and U. Ramamurty, Mechanical behavior of amorphous alloys, Acta Materialia 55, 4067–4109 (2007).
   Web of Science ®Google Scholar
• A. L. Greer, Y. Q. Cheng, and E. Ma, Shear bands in metallic glasses, Mater. Sci. Eng. R Rep. 74, 71–132 (2013).
   Web of Science ®Google Scholar
• D. Chicot, Ph. Démarécaux, and J. Lesage, Apparent interface toughness of substrate and coating couples from indentation tests, Thin Solid Films 283, 151–157 (1996).
   Web of Science ®Google Scholar
• J. Lin, Z. Wang, P. Lin, J. Cheng, X. Zhang, and S. Hong, Effects of post annealing on the microstructure, mechanical properties and cavitation erosion behavior of arc-sprayed fenicrbsinbw coatings, Mater. Des. 65, 1035–1040 (2015).
   Web of Science ®Google Scholar
• T. Shmyreva and J. Knapp, Nano-amorphous coatings for medical instruments. In Medical Device Materials: Proceeding Materials and Processes for Medical Devices Conference, 103–107 (2004).
   Google Scholar
• J.-S. Choi, C. Lee, J. Farmer, D. Day, M. Wall, C. Saw, M. Boussoufi, B. Liu, H. Egbert, D. Branagan, and A. D'Amato, Application of neutron-absorbing structural-amorphous metal (SAM) coatings for spent nuclear fuel (SNF) container to enhance criticality safety controls, MRS Proc. 985, 0985–NN08, Cambridge University Press (2006).
   Google Scholar
• K. Shimamura, Y. Matsumoto, and T. Matsunaga, Some applications of amorphous alloy coatings by sputtering, Surf. Coat. Technol. 50, 127–133 (1992).
   Web of Science ®Google Scholar
• A. P. Thakoor, J. L. Lamb, S. K. Khanna, M. Mehra, and W. L. Johnson, Refractory amorphous metallic (W0.6Re0.4)76B24 coatings on steel substrates, J. Appl. Phy. 58, 3409–3414 (1985).
   Web of Science ®Google Scholar
• A. Inoue and A. Takeuchi, Recent development and application products of bulk glassy alloys, Acta Materialia 59, 2243–2267 (2011).
   Web of Science ®Google Scholar
• N. B. Dahotre, Multiscale laser materials engineering: energy-efficient processing and materials performance, Nanomater. Ener. 2, 64–70 (2013).
   Google Scholar