Microstructure Measurement Techniques for Studying Electromigration in ULSI Interconnects

References

• J. R. Lloyd, and J. J. Clement, Electromigration in copper conductors, Thin Solid Films 262, 135–141 (1995).
   Web of Science ®Google Scholar
• J. R. Lloyd, Electromigration in thin film conductors, Semicond. Sci. Technol. 12, 1177–1185 (1997).
   Web of Science ®Google Scholar
• D. W. Malone, and R. E. Hummel, Electromigration in integrated circuits, Crit Rev. Solid State Mater. 22(3), 199–238 (1997).
   Web of Science ®Google Scholar
• E. T. Ogawa, K. D. Lee, V. A. Blaschke, and P. S. Ho, Electromigration reliability issues in dual-damascene Cu interconnects, IEEE Trans. Reliab. 51(4), 403–419 (2002).
   Web of Science ®Google Scholar
• K. N. Tu, Recent advances on electromigration in very-large-scale-integration of interconnects, J. Appl. Phys. 94(9), 5451–5473 (2003).
   Web of Science ®Google Scholar
• B. Li, T. D. Sullivan, T. C. Lee, and D. Badami. Reliability challenges for copper interconnects, Microelectron. Reliab. 44, 365–380 (2004).
   Web of Science ®Google Scholar
• S. P. Murarka, and S. W. Hymes, Copper metallization for ULSI and beyond, Crit. Rev. Solid State Mater. 20(2), 87–124 (2006).
   Web of Science ®Google Scholar
• C. M. Tan, and A. Roy, Electromigration in ULSI interconnects, Mater. Sci. Eng. R 58, 1–75 (2007).
   Web of Science ®Google Scholar
• A. Roy, and C. M. Tan, Very high current density package level electromigration test for copper interconnects, J. Appl. Phys. 103, 093707 (2008).
   Web of Science ®Google Scholar
• C.-T. Sah, Fundamental of Solid-State Electronics, Word Scientific, Singapore (1991).
   Google Scholar
• M. J. Attardo, and R. Rosenburg, Electromigration damage in aluminum film conductors, J. Appl. Phys. 41, 2381–2386 (1970).
   Web of Science ®Google Scholar
• E. Nagasawa, and H. Okabayashi, Electromigration of sputtered Al–Si alloy films, IEEE Relia. Phys. Symp. Proc., San Francisco, California, pp. 64–71 (1979).
   Google Scholar
• P. Li, A. S. Yapsir, K. Rajan, and T.-M. Lu, Electromigration in Al/SiO2 films prepared by a partially ionized beam deposition technique, Appl. Phys. Lett. 54 2443–2445 (1989).
   Web of Science ®Google Scholar
• S. Vaidya, and A. K. Sinha, Effect of texture and grain structure on electromigration in Al–0.5% Cu thin films, Thin Solid Films 75, 252–259 (1981).
   Web of Science ®Google Scholar
• J. Cho, and C. V. Thomson, Grain size dependence of electromigration induced failures in narrow interconnects, Appl. Phys. Lett. 54, 2577–2579 (1989).
   Web of Science ®Google Scholar
• D. B. Knorr, D. P. Tracy, and K. P. Rodbell, Correlation of texture with electromigration behavior in Al metallization, Appl. Phys. Lett. 59, 3141–3143 (1991).
   Web of Science ®Google Scholar
• D. B. Knorr, and K. P. Rodbell, Effects of film texture on electromigration lifetime predictions, MRS Proc., Pittsburgh, PA (1992).
   Google Scholar
• K. P. Rodbell, D. B. Knorr, and D. P. Tracy, Texture effects on the electromigration behavior of layered Ti/AlCu/Ti films, MRS Proc., Pittsburgh, PA (1992).
   Google Scholar
• D. B. Knorr, and K. P. Rodbell, Effects of texture, microstructure, and alloy content on electromigration of aluminum-based metallization, SPIE Proc. of the Submicrometer Metallization, 1805, 210–221 (1992).
   Google Scholar
• G. Wassermann, and J. Grewen, Texturen Metallisher Wertstoffe, Springer-Verlag, Berlin, pp. 5–13 (1962).
   Google Scholar
• D. B. Knorr, and K. P. Rodbell, The role of texture in the electromigration behavior of pure aluminum line, J. Appl. Phys. 79, 2409–2417 (1996).
   Web of Science ®Google Scholar
• D. B. Knorr, and D. P. Tracy, A review of microstructure in vapor deposited copper thin films, Mat. Chem. Phys. 41, 206–216 (1995).
   Web of Science ®Google Scholar
• H. J. Bunge, Texture Analysis in Materials Science, Butterworths, London (1982).
   Google Scholar
• H. J. Bunge and C. Esling (Eds.) Quantitative Texture Analysis, Deutsche Gesellschaft für Metallkunde, Oberursel, Germany (1982).
   Google Scholar
• H. R. Wenk (Ed.) Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis, Academic Press, New York (1985).
   Google Scholar
• H. J. Bunge, Three-dimensional texture analysis, Int. Mater. Rev. 32, 265–291 (1987).
   Web of Science ®Google Scholar
• H. J. Bunge and C. Esling (Eds.) Advances and Applications of Quantitative Texture Analysis, DGM Informations gesellschaft, Oberursel, Germany (1991).
   Google Scholar
• C. Ryu, K.-W. Kwon, A. L. S. Loke, H. Lee, T. Nogami, V. M. Dubin, R. A. Kavari, G. W. Ray, and S. S. Wong, Microstructure and reliability of copper interconnects, IEEE Trans. Electron Dev. 46, 1113–1120 (1999).
   Web of Science ®Google Scholar
• T. Usui, H. Nasu, T. Watanabe, H. Shibata, T. Oki, and M. Hatano, Electromigration diffusion mechanism of electroplated copper and cold/hot two-step sputter-deposited aluminum-0.5-wt% copper damascene interconnects, J. Appl. Phys. 98, 063509 (2005).
   Web of Science ®Google Scholar
• D. P. Field, D. Dornisch, and H. H. Tong, Investigating the microstructure-reliability relationship in Cu damascene lines, Scripta Materialia 45, 1069–1075 (2001).
   Web of Science ®Google Scholar
• H. Lee, and S. D. Lopatin, The influence of barrier types on the microstructure and electromigration characteristics of electroplated copper, Thin Solid Films 492, 279–284 (2005).
   Web of Science ®Google Scholar
• T. D. Sullivan, Reliability considerations for copper metallizations in ULSI circuits, AIP Conf. Proc. CP491, 39–50 (1999).
   Google Scholar
• L. Vanasupa, D. Pinck, Y.-C. Joo, T. Nogomi, S. Pramanick, S. Lopatin, and K. Yang, The impact of linewidth and line density on the texture of electroplated Cu in damascene-fabricated lines, Electrochem. Solid State Lett. 2(6), 275–277 (1999).
   Google Scholar
• T. Ritzdorf, L. Graham, S. Jin, C. Mu, and D. Fraser, Self-annealing of electrochemically deposited copper films in advanced interconnect applications, IEEE IITC Proc., San Francisco, CA, 1998.
   Google Scholar
• N. D. McCusker, H. S. Gamble, and B. M. Armstrong, Surface electromigration in copper interconnects, Microelectron. Reliab. 40, 69–76 (2000).
   Web of Science ®Google Scholar
• L. Arnaud, G. Tartavel, T. Berger, D, Mariolle, Y. Gobil, and I. Touet, Microstructure and electromigration in copper damascene lines, Microelectron. Reliab. 40, 77–86 (2000).
   Web of Science ®Google Scholar
• H. Wendrock, K. Mirpuri, S. Menzel, G. Schindler, and K. Wetzig, Correlation of electromigration defects in small damascene Cu interconnects with their microstructure, Microelectron. Eng. 82, 660–664 (2008).
   Web of Science ®Google Scholar
• D. Kwon, H. Park, and C. Lee, Electromigration resistance-related microstructural change with rapid thermal annealing of electroplated copper films, Thin Solid Films 475, 58–62 (2005).
   Web of Science ®Google Scholar
• K. P. Rodbell, J. L. Hurd, and P. W. DeHaven, Blanket and local crystallographic texture determination in layered Al metallization, Mater. Res. Soc. Symp. Proc. 403, 617–626 (1996).
   Google Scholar
• R. R. Keller, J. A. Nucci, and D. P. Field, Local textures and grain boundaries in voided copper interconnects, J. Electron. Mater. 26, 996–1001 (1997).
   Web of Science ®Google Scholar
• D. P. Field, and D. J. Dongley, Microstructure mapping of interconnects by orientation imaging microscopy, J. Electron. Mater. 25, 1767–1771 (1996).
   Web of Science ®Google Scholar
• C. E. Kalnas, R. R. Keller, and D. P. Field, Crystallographic characterization of interconnects by orientation mapping in the SEM, AIP Conf. Proc. CP499, 848–853 (1998).
   Google Scholar
• J. P. Spencer, C. J. Humphreys, and P. B. Hirsch, A dynamical theory for the contrast of perfect and imperfect crystals in the SEM using backscattered electrons, Philos. Mag. 26, 193–213 (1975).
   Web of Science ®Google Scholar
• L. Reimer, Transmission Electron Microscopy, Springer–Verlag, New York (1984).
   Google Scholar
• I. J. Goldstein, D. E. Newbury, P. Echlin, D. C. Joy, A. D. Romig Jr., C. E. Lyman, C. Fiori, and E. Lifshin, Scanning Electron Microscopy and X-ray Microanalysis, 2nd ed., Plenum Press, New York (1992).
   Google Scholar
• S. X. Ren, E. A. Kenik, K. B. Alexander, and A. Goyal, Exploring spatial resolution in electron back-scattered diffraction experiments via Monte Carlo simulation, Microsc. Microanal. 4, 15–22, (1998).
   PubMed Web of Science ®Google Scholar
• D. J. Dingley, and V. Randle, Microstructure determination by electron back-scatter diffraction, J. Mater. Sci. 27, 4545–4566 (1992).
   Web of Science ®Google Scholar
• J. Proost, T. Hirato, T. Furuhara, K. Maex, and J.-P. Celis, Microstructure and electromigration-induced drift in electroplated Cu, J. Appl. Phys. 87(6), 2792–2802 (2008).
   Web of Science ®Google Scholar
• Y. Hirose, N. Hashikawa, K. Fukumoto, and Y. Mashiko, Microsampling technique for EBSP inspection on the cross-sections of copper trench lines in ULSIs, J. Electron Microscopy. 53, 567–570 (2004).
   PubMedGoogle Scholar
• R. Galand, L. Arnaud, E. Petitprez, G. Brunetti, L. Clément, P. Waltz, and Y. Wouters, Grain boundary as relevant microstructure feature for electromigration in advanced technology studied by electron back scattered diffraction, IEEE IITC and MAM Conf. Proc., Dresden, (2011).
   Google Scholar
• T. Jiang, S. Ryu, Q. Zhao, J. Im, R. Huang, and P. S. Ho, Measurement and analysis of thermal stresses in 3D integrated structures containing through-silicon vias, Microelectrn. Reliab. 53, 53–62 (2013).
   Web of Science ®Google Scholar
• O. Luhn, C. Van Hoof, W. Ruythooren, and J. P. Celis, Filling of microvia with an aspect ratio of 5 by copper electrodeposition, Electrochim. Acta. 54(9), 2504, (2009).
   Web of Science ®Google Scholar
• J. Onuki, S. Tashiro, K. Khoo, N. Ishikawa, T. Kimura, Y. Chonan, and H. Akahoshi, Effect of the purity of plating materials on the reduction of resistivity of Cu wires for future LSIs, J. Electrochem. Soc. 157(9), H857 (2010).
   Web of Science ®Google Scholar
• K. Khoo, and J. Onuki, Texture investigation in the trench depth direction of very fine copper wires less than 100 nm wide using electron backscatter diffraction, Thin Solid Films 518(12), 3413 (2010).
   Web of Science ®Google Scholar
• K. Mirpuri, and J. Szpunar, Impact of trench aspect ratio on microstructure variation in as-deposited and annealed damascene Cu interconnect lines, Micron 35(7), 575 (2004).
   PubMed Web of Science ®Google Scholar
• M. C. Lafouresse, Y. Fukunaka, T. Homma, S. Honjo, S. Kikuchi, and W. Schwarzacher, Potential-dependent surface morphology and microtexture evolution of electrodeposited copper films, Electrochem. Solid-State Lett. 14(7), D77 (2011).
   Google Scholar
• H. Cao, T. Hang, H. Ling, and M. Li, Behaviors of chloride Ions in methanesulfonic acid bath for copper electrodeposition of through-silicon-Via, J. Electrochem. Soc. 160(4), D146 (2013).
   Web of Science ®Google Scholar
• Y. Zhang, G. Ding, P. Cheng, and H. Wang, Microstructures of copper electroplated through-silicon via characterized by electron backscattering diffraction technique, ECS Electrochem. Lett. 3(7), D23–D25 (2014).
   Web of Science ®Google Scholar
• H.-Y. Hsiao et al, Unidirectional growth of microbumps on (111)-oriented and nanotwinned copper, Science 336, 1007 (2012).
   PubMed Web of Science ®Google Scholar
• C.-M. Liu, H.-W Lin, C.-L Lu, and C. Chen, Effect of grain orientations of Cu seed layers on the growth of <111>-oriented nanotwinned Cu, Sci. Rep. 4, 6123 (2014).
   PubMed Web of Science ®Google Scholar
• A. P. Zhilyaev, S. N. Sergeev, and T. G. Langdon, Electron backscatter diffraction (EBSD) microstructure evolution in HPT copper annealed at a low temperature, J. Mater. Res. Technol. 3(4), 338–343 (2014).
   Google Scholar
• Interdisciplinary Centre for Electron Microscopy, Ecublens, Switzerland. http:cimewww.epfl.ch/people/cayron/fichiers/thesebook-chp3.pdf.
   Google Scholar
• J. C. Bravman, and R. Sinclair, The preparation of cross-section specimens for transmission electron microscopy, J. Electron. Microsc. Tech. 1, 53–61 (1984).
   Google Scholar
• L. A. Gionnuzzi, J. L. Drown, S. R. Brown, R. B. Irwin, and F. A. Stevie, Applications of the FIB lift-out technique for TEM specimen preparation, Microsc. Res. Techn. 41, 285–290 (1998).
   PubMed Web of Science ®Google Scholar
• R. K. Nalla, A. E. Porter, C. Daraio, A. M. Minor, and V. Radmilovic, Ultrastructural examination of dentin using focused ion beam sectioning and transmission electron microscopy, Micron 36, 672–680 (2005).
   PubMed Web of Science ®Google Scholar
• X. Meng-Burany, Analysis of Electroplated films using Dual-Beam FIB/SEM and TEM Techniques, Modern Electroplating, 5th ed., John Wiley & Sons Inc., Hoboken, New Jersey, USA. (2010).
   Google Scholar
• J. Goldstein, D. Newbury, D. Joy, C. Lyman, P. Echlin, E. Lifshin, L. Sawyer, and J. Michael, Scanning Electron Microscopy and X-ray Microanalysis, 3rd ed., Kluwer Academic, New York (2003).
   Google Scholar
• P. Hirsch, A. Howie, R. B. Nicholson, D. W. Pashley, and M. J. Whelan, Electron Microscopy of Thin Crystals, Krieger Publishing, New York (1977).
   Google Scholar
• C.-K. Hu, L. M. Gignac, B. Baker-O'Neal, E. Liniger, R. Yu, P. Floitz, and A. K. Stamper, Electromigration reliability of advanced interconnects, AIP Conf. Proc., 945, 27–41 (2007).
   Google Scholar
• C.-K. Hu, K. Y. Lee, L. M. Gignac, and R. Crruthers, Electromigration in physical vapor deposited Cu lines, AIP Conf. Proc. 418, 113–126 (1998).
   Google Scholar
• C. Ciofi, V. Dattilo, and B. Neri, Copper interconnection line: SARF characterization and lifetime test, Microelectron. Reliab. 36(11/12), 1747–1750 (1996).
   Web of Science ®Google Scholar
• A. Gladkikh, M. Karpovski, A. Palevski, and Y. S. Kaganovskii, Effect of microstructure on the electromigration kinetice in Cu lines, J. Phys. D: Appl. Phys. 31, 1626–1629 (1998).
   Web of Science ®Google Scholar
• C.-K. Hu, J. Ohm, L. M. Gignac, C. M. Breslin, S. Mittal, G. Bonilla, D. Edelstein, R. Rosenberg, S. Choi, J. J. An, A. H. Simon, M. S. Angyal, L. Clevenger, J. Maniscalco, T. Nogami, C. Penny and B. Y. Kim. Electromigration in Cu(Al) and Cu(Mn) damascene lines, J. Appl. Phys. 111, 093722 (2012).
   Web of Science ®Google Scholar
• K. Khoo, J. Onuki, T. Nagano, Y. Chonan, H. Akahoshi, T. Tobita, M. Chiba, T. Saito, and K. Ishikawa, Observation of microstructures in the longitudinal direction of very narrow Cu interconnects, Jpn. J. Appl. Phys. 45, L825 (2006).
   Web of Science ®Google Scholar
• K. P. Khoo, J. Onuki, T. Nagano, Y. Chonan, H. Akahoshi, T. Tobita, M. Chiba, T. Saito, and K. Ishikawa, Microstructures of 50-nm Cu interconnectes along the longitudinal direction, Mater. Trans. 48(10), 2703–2707 (2007).
   Web of Science ®Google Scholar
• L. Cao, K. J. Ganesh, L. Zhang, O. Aubel, C. Hennesthal, M. Hauschildt, P. J. Ferreira, and P. S. Ho, Grain structure analysis and effect on electromigration reliability in nanoscale Cu interconnects, Appl. Phys. Lett. 102,131907 (2013).
   Web of Science ®Google Scholar
• X. Zhang, L. Cao, V. Ryan, P. S. Ho, B. Taylor, C. Witt, and C. Labelle, Co linear impact on microstructure of Cu interconnects, ECS J. Solid State Sci. Technol. 4(1), N3177–N3179 (2015).
   Web of Science ®Google Scholar
• S. Du, and Y. Li, Effect of annealing on microstructure and mechanical properties of magnetron sputtered Cu thin films, Adv. Mater. Sci. Eng. 2015, 969580–8 (2015).
   Google Scholar
• Q. T. Jiang, M. Nowell, B. Foran, A. Frank, R. H. Havemann, V. Parihar, R. A. Augur, and J. D. Luttmer, Analysis of copper grains in damascene trenches after rapid thermal processing or furnace anneals, J. Electron. Mater. 31(1), 10–15 (2002).
   Web of Science ®Google Scholar
• C. J. Druffner, E. J. Schumaker, P. T. Murray, and S. Sathish, Imaging the microstructure of copper with the atomic force microscope (AFM) and ultrasonic force microscope (UFM), SPIE Proc. Test. Reliab. Applic. Micro- Nano-Mater. Syst. 5045, 122–131 (2003).
   Google Scholar
• H. Haberland, M. Karrais, M. Mall, and Y. Thurner, Thin films from energetic cluster impact: a feasibility study, J. Vac. Sci. Technol. A 10(5), 3266–3271 (1992).
   Web of Science ®Google Scholar
• N. Burnham, A. J. Kulik, G. Gremaud, P. J. Gallo, and F. Oulevey, Scanning local acceleration microscopy, J. Vac. Sci. Technol. B 14(2), 794–799 (1995).
   Web of Science ®Google Scholar
• N. Burnham, G. Gremaud, A. J. Kulik, P. J. Gallo, and F. Oulevey, Materials properties measurements: choosing the optimal scanning probe microscope configuration, J. Vac. Sci. Technol. B 14(2), 1308–1312 (1996).
   Web of Science ®Google Scholar
• U. Rabe, and W. Arnold, Acoustic microscopy by atomic force microscopy, Appl. Phys. Lett. 64(12), 1493–1495 (1994).
   Web of Science ®Google Scholar
• K. Yamanaka, and H. Ogiso, Ultrasonic force microscopy for nanometer resolution of subsurface imaging, Appl. Phys. Lett. 64(2), 178–180 (1994).
   Web of Science ®Google Scholar
• O. Kolosov, and K. Yamanaka, Nonlinear detections of ultrasonic vibrations in an atomic force microscope, Jpn. J. Appl. Phys. 32, 1095–1098 (1993).
   Web of Science ®Google Scholar
• K. Yamanaka, H. Ogiso, and O. Kolosov, Analysis of subsurface imaging and effect of contact elasticity in the ultrasonic force microscope, Jpn. J. Appl. Phys. 33, 3197–3203 (1994).
   Web of Science ®Google Scholar
• K. B. Crozier, G. G. Yaralioglu, F. L. Degertekin, J. D. Adams, S. C. Minne, and C. F. Quate, Thin film characterization by atomic force microscopy at ultrasonic frequencies, Appl. Phys. Lett. 76, 1950–1952 (2000).
   Web of Science ®Google Scholar
• V. Scherer, B. Bhushan, U. Rabe, and W. Arnold, Local elasticity and lubrication measurements using atomicforce and friction force microscopy at ultrasonic frequencies, IEEE Trans. Magnet. 33(5), 4077–4079 (1997).
   Web of Science ®Google Scholar
• F. Oulevey, G. Gremaud, A. Sémoroz, A. J. Kulik, N. A. Burnham, E. Dupas, and D. Gourdon, Local mechanical spectroscopy with nanometer-scale lateral resolution, Rev. Sci. Instrum. 69(5), 2085–2094 (1998).
   Web of Science ®Google Scholar
• T. N. Konkova, S. Yu. Mironov, Y. Ke, and J. Onuki, Microstructural characteristics of electrodeposited damascene lines, Lett. Mater. 4(2), 104–107 (2014).
   Google Scholar
• F. H. Baumann, Very low angle annular dark field imaging in the scanning transmission electron microscope: A versatile tool for micro and nano-characterization, J. Vac. Sci. Technol. B 30(4), 041804–1–041804–3 (2012).
   Web of Science ®Google Scholar
• C.-C. Yang, B. Li, F. H. Baumann, J. Li, D. Edelstein, and R. Rosenberg, Microstructure modulation in copper interconnects, IEEE Electron Device Lett. 35(5), 572–574 (2014).
   Web of Science ®Google Scholar
• L. Cao, L. Zhang, P.S. Ho, P. Justison, and M. Hauschildt, Scaling effects on microstructure and electromigration reliability for Cu and Cu(Mn) interconnects, IEEE Int. Relia. Phys. Symp. 2014, 5A.5.1–5A.5.5 (2014).
   Google Scholar