A Critical Review on Physical Vapor Deposition Coatings Applied on Different Engine Components

References

• J. Fu, Q. Tang, J. Liu, B. Deng, J. Yang, and R. Feng, A combined air cycle used for IC engine supercharging based on waste heat recovery, Energy Convers. Manage. 87, 86–95 (2014).
   Web of Science ®Google Scholar
• A. Sanjid, M. Kalam, H. Masjuki, S.A. Rahman, and M. Abedin, Combustion, performance and emission characteristics of a DI diesel engine fueled with Brassica juncea methyl ester and its blends, RSC Adv. 4(70), 36973–36982 (2014).
   Web of Science ®Google Scholar
• L.F. Chuaha, A.R.A. Azizb, S. Yusupa, J.J. Klemeš, and A. Bokharia, Waste cooking oil biodiesel via hydrodynamic cavitation on a diesel engine performance and greenhouse gas footprint reduction, Chemical Engineering 50 (2016).
   Google Scholar
• F. An, R. Earley, and L. Green-Weiskel, Global overview on fuel efficiency and motor vehicle emission standards: policy options and perspectives for international cooperation, United Nations Background Paper (3) (2011).
   Google Scholar
• J. Zielinski, R. Andreucci, and C.B. Aktas, Prospects for meeting the corporate average fuel economy standards in the US, Procedia Engineering 145, 460–467 (2016).
   Google Scholar
• K. Lejda and P. Woś, Simulation of combustion process in direct injection diesel engine based on fuel injection characteristics. Intech, Croatia (2012).
   Google Scholar
• P. Lakshminarayanan and N.S. Nayak, Critical component wear in heavy duty engines. John Wiley & Sons, New York (2011).
   Google Scholar
• B. Venkataraman and G. Sundararajan, The sliding wear behaviour of AlSiC particulate composites—I. Macrobehaviour, Acta Materialia 44(2), 451–460 (1996).
   Web of Science ®Google Scholar
• S. Dezecot, V. Maurel, J-Y Buffiere, F. Szmytka, and A. Koster, 3D characterization and modeling of low cycle fatigue damage mechanisms at high temperature in a cast aluminum alloy, Acta Materialia 123, 24–34 (2017).
   Web of Science ®Google Scholar
• W. Paatsch, Recent trends in surface finishing for automobile industry in Germany, Surf. Coat. Technol. 169, 753–757 (2003).
   Web of Science ®Google Scholar
• M. Priest and C. Taylor, Automobile engine tribology—approaching the surface, Wear 241(2), 193–203 (2000).
   Web of Science ®Google Scholar
• I. Butusov and N.Y. Dudareva, improving the reliability of aluminum-alloy pistons in internal-combustion engines by microarc oxidation, Russ. Eng. Res. 36(2), 116–118. (2016).
   Google Scholar
• J. Fu, J. Liu, B. Deng, R. Feng, J. Yang, F. Zhou, and X. Zhao, An approach for exhaust gas energy recovery of internal combustion engine: Steam-assisted turbocharging. Energy, Convers. Manage. 85, 234–244 (2014).
   Web of Science ®Google Scholar
• S-S Lin and D.J. Patterson, Piston-ring assembly friction modeling by similarity analysis, SAE Int. (1993).
   Google Scholar
• G.W. Rowe, The chemistry of tribology, friction, lubrication and wear, Roy. Instit. Chem. Rev. 1(2), 135–204 (1968).
   Google Scholar
• G. Ryk, Y. Kligerman, I. Etsion, and A. Shinkarenko, Experimental investigation of partial laser surface texturing for piston-ring friction reduction, Tribol. Trans. 48(4), 583–588 (2005).
   Web of Science ®Google Scholar
• M. Takiguchi, K. Machida, and S. Furuhama, Piston friction force of a small high speed gasoline engine, J. Tribol. 110(1), 112–118 (1988).
   Web of Science ®Google Scholar
• S.C. Tung and M.L. McMillan, Automotive tribology overview of current advances and challenges for the future, Tribol. Int. 37(7), 517–536 (2004).
   Web of Science ®Google Scholar
• J.J. Truhan, J. Qu, and P.J. Blau, A rig test to measure friction and wear of heavy duty diesel engine piston rings and cylinder liners using realistic lubricants, Tribol. Int. 38(3), 211–218 (2005).
   Web of Science ®Google Scholar
• E. Rabinowicz, Friction and Wear of Materials, Wiley, New York (1965).
   Google Scholar
• V.D.N. Rao, D.M. Kabat, R. Rose, D. Yeager, R. Brandt, and D.Y. Leong, Performance of plasmaspray coated bore 4.6L-V8 aluminum block engines in dynamometer and fleet vehicle durability tests, SAE Int. (1997).
   Google Scholar
• K. Bewilogua, G. Bräuer, A. Dietz, J. Gäbler, G. Goch, B. Karpuschewski, and B. Szyszka, Surface technology for automotive engineering, CIRP Ann. Manufact. Technol. 58(2), 608–627 (2009).
   Web of Science ®Google Scholar
• J. Adamus, J.M. Lackner, and Ł. Major, A study of the impact of anti-adhesive coatings on the sheet-titanium forming processes, Arch. Civil Mechan. Eng. 13(1), 64–71 (2013).
   Web of Science ®Google Scholar
• A. Matthews and K. Holmberg, Coatings tribology. In Tribology and Interface Engineering, vol. 56, Elsevier Science, Netherlands (2009).
   Google Scholar
• J. Vetter, G. Barbezat, J. Crummenauer, and J. Avissar, Surface treatment selections for automotive applications, Surf. Coat. Technol. 200 (5–6), 1962–1968 (2005).
   Web of Science ®Google Scholar
• K Bewilogua, G Bräuer, A Dietz, J Gäbler, G Goch, B Karpuschewski and B Szyszka, “Surface technology for automotive engineering, CIRP Ann. Manufact. Technol. 58 (2), 608–627 (2009).
   Web of Science ®Google Scholar
• W.D. Sproul and R. Rothstein, High rate reactively sputtered TiN coatings on high speed steel drills, Thin Solid Films 126 (3), 257–263 (1985).
   Web of Science ®Google Scholar
• J. Molarius, A Korhonen, E. Harju, and R. Lappalainen, Comparison of cutting performance of ion-plated NbN, ZrN, TiN and (Ti, Al) N coatings, Surf. Coat. Technol. 33, 117–132 (1987).
   Web of Science ®Google Scholar
• K. Holmberg and A. Mathews, Coatings tribology: a concept, critical aspects and future directions, Thin Solid Films 253 (1), 173–178 (1994).
   Web of Science ®Google Scholar
• B. Bhushan and B.K. Gupta, Handbook of Tribology: Materials, Coatings, and Surface Treatments. McGraw-Hill, New York (1991).
   Google Scholar
• S. PalDey and S. Deevi, Single layer and multilayer wear resistant coatings of (Ti, Al) N: a review, Mater. Sci. Eng. A 342 (1), 58–79 (2003).
   Web of Science ®Google Scholar
• H.A. Jehn, Multicomponent and multiphase hard coatings for tribological applications, Surf. Coat. Technol. 131 (1), 433–440 (2000).
   Web of Science ®Google Scholar
• Y. Wang, K. Brogan, and S.C. Tung, Wear and scuffing characteristics of composite polymer and nickel/ceramic composite coated piston skirts against aluminum and cast iron cylinder bores, Wear 250 (1), 706–717 (2001).
   Google Scholar
• S.C. Tung, and Y. Huang, Modeling of abrasive wear in a piston ring and engine cylinder bore system©, Tribol. Trans. 47 (1), 17–22 (2004).
   Web of Science ®Google Scholar
• A.S.M.A. Haseeb, M.A. Fazal, M.I. Jahirul, and H.H. Masjuki, Compatibility of automotive materials in biodiesel: A review, Fuel 90 (3), 922–931 (2011).
   Web of Science ®Google Scholar
• Dmitri Keliovich, “Bearings in internal combustion engines,” SubsTech: Substances & Technologies. http://www.substech.com/dokuwiki/doku.php?id=bearings_in_internal_combustion_engines
   Google Scholar
• W.H. Crouse and D. Anglin, Automotive Mechanics. 10th Int. ed. Macmillan/McGraw-Hill, New York (1993).
   Google Scholar
• V. Bosch, Endurance test with E diesel. Internal Report No. 00/47/3156. Robert Bosch Corporation, Farmington Hills, MI, (2001).
   Google Scholar
• R.C. McCune, and G.A. Weber, Automotive engine materials A2 - Buschow, K.H. Jürgen. In R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan, and P. Veyssière (eds.), Encyclopedia of Materials: Science and Technology (Second Edition), Elsevier, Oxford (2001). pp. 426–434.
   Google Scholar
• J.S. Santner, Iron Alloys. Engineered Casting Solutions, USA (2006).
   Google Scholar
• M. Ihm, Introduction to Gray Cast Iron Brake Rotor Metallurgy. SAE.
   Google Scholar
• “Chemical Composition of Steels Used for Manufacturing of Piston Pins,” Benara Bearings & Pistons Ltd. http://www.benara-phb.com/products/piston_pins/specifications.htm
   Google Scholar
• “AISI Type 304 Stainless Steel,” ASM Aerospace Specification Metals Inc. http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=MQ304A
   Google Scholar
• AZoM, “Stainless Steel – Grade 440C (UNS S44004),” AZO Materials. Last modified September 26, 2012, http://www.azom.com/article.aspx?ArticleID=6846
   Google Scholar
• L. Collini, G. Nicoletto, and R. Konečná, Microstructure and mechanical properties of pearlitic gray cast iron, Mater. Sci. Eng. A 488 (1–2), 529–539 (2008).
   Web of Science ®Google Scholar
• “AISI S65007,” Tool & Die Steel. http://www.tool-die-steels.com/grades/Stainless-Steels-Special-Steel/31/3321/S65007.html
   Google Scholar
• J.L. Jorstad, Reynolds 390 Engine Technology, SAE Technical Paper 830010 (1983).
   Google Scholar
• B.E. Slattery, A. Edrisy, and T. Perry, Investigation of wear induced surface and subsurface deformation in a linerless Al–Si engine, Wear 269 (3–4), 298–309 (2010).
   Web of Science ®Google Scholar
• S. Tung and Y. Cheng, Tribological characteristics and microstructures of PVD thin film coatings on steel substrates. Proc. International Wear Conference, San Francisco, CA, 1993.
   Google Scholar
• H. Hashimoto, Y. Serino, Y. Aoyama, and K. Hashimoto, Non-heat-treated vanadium alloyed steel crankshaft, Proc. International Congress and Exposition, USA (1982).
   Google Scholar
• E.A. Khorshid, and A.M. Nawwar, A review of the effect of sand dust and filtration on automobile engine wear, Wear 141 (2), 349–371 (1991).
   Web of Science ®Google Scholar
• J. Booker, Dynamically loaded journal bearings: maximum film pressure, J. Lubricat. Technol. 91, 534 (1969).
   Google Scholar
• K. Kato, Wear in relation to friction—a review, Wear 241 (2), 151–157 (2000).
   Web of Science ®Google Scholar
• T. Sasada, M. Oike, and N. Emori, The effect of abrasive grain size on the transition between abrasive and adhesive wear, Wear 97 (3), 291–302 (1984).
   Web of Science ®Google Scholar
• P.J. Blau, Fifty years of research on the wear of metals, Tribol. Int. 30 (5), 321–331 (1997).
   Web of Science ®Google Scholar
• J.A. Williams, Wear and wear particles—some fundamentals, Tribol. Int. 38 (10), 863–870 (2005).
   Web of Science ®Google Scholar
• “Audi A3, cylinder on demand,” Green Car Congress: Energies, technologies, and policies for sustainable mobility. http://bioage.typepad.com/.a/6a00d8341c4fbe53ef0168eb33c7dc970c-popup
   Google Scholar
• J.B. Adams, L.G. Hector, D.J. Siegel, H. Yu, and J. Zhong, Adhesion, lubrication and wear on the atomic scale, Surf. Interf. Anal. 31 (7), 619–626 (2001).
   Web of Science ®Google Scholar
• K. Kato, Abrasive wear of metals, Tribol. Int. 30 (5), 333–338 (1997).
   Web of Science ®Google Scholar
• M. Godet, The third-body approach: a mechanical view of wear, Wear 100 (1), 437–452 (1984).
   Web of Science ®Google Scholar
• G Tomlinson, P Thorpe and H Gough, “An investigation of the fretting corrosion of closely fitting surfaces”. Proceedings of the Institution of Mechanical Engineers 141 (1), 223–249 (1939).
   Google Scholar
• T. Eyre, K. Dutta, and F. Davis, Characterization and simulation of wear occurring in the cylinder bore of the internal combustion engine, Tribol. Int. 23 (1), 11–16 (1990).
   Web of Science ®Google Scholar
• S. George, S. Balla, and M. Gautam, Effect of diesel soot contaminated oil on engine wear, Wear 262 (9–10), 1113–1122 (2007).
   Web of Science ®Google Scholar
• D. Agarwal, S.K. Singh, and A.K. Agarwal, Effect of Exhaust Gas Recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine, Appl. Ener. 88 (8), 2900–2907 (2011).
   Web of Science ®Google Scholar
• S. Aldajah, O.O. Ajayi, G.R. Fenske, and I.L. Goldblatt, Effect of exhaust gas recirculation (EGR) contamination of diesel engine oil on wear, Wear 263 (1–6), 93–98 (2007).
   Web of Science ®Google Scholar
• M. Gautam, K. Chitoor, M. Durbha, and J.C. Summers, Effect of diesel soot contaminated oil on engine wear — investigation of novel oil formulations, Tribol. Int. 32 (12), 687–699 (1999).
   Web of Science ®Google Scholar
• M. Ratoi, R. Castle, C. Bovington, and H. Spikes, The influence of soot and dispersant on ZDDP film thickness and friction, Lubricat. Sci. 17 (1), 25–43 (2004).
   Google Scholar
• Y. Wang, S. Narasimhan, J. Larson, J. Larson, and G. Barber, The effect of operating conditions on heavy duty engine valve seat wear, Wear 201 (1), 15–25 (1996).
   Web of Science ®Google Scholar
• R. Mainwaring, Soot and wear in heavy duty diesel engines, SAE Technical Paper, (1997).
   Google Scholar
• P. Forsberg, P. Hollman, and S. Jacobson, Wear mechanism study of exhaust valve system in modern heavy duty combustion engines, Wear 271 (9), 2477–2484 (2011).
   Web of Science ®Google Scholar
• D.K. Srivastava, A.K. Agarwal, and J. Kumar, Effect of liner surface properties on wear and friction in a non-firing engine simulator, Mater. Des. 28 (5), 1632–1640 (2007).
   Web of Science ®Google Scholar
• M. Priest, D. Dowson, and C. Taylor, Predictive wear modelling of lubricated piston rings in a diesel engine, Wear 231 (1), 89–101 (1999).
   Web of Science ®Google Scholar
• C. Taylor, Automobile engine tribology—design considerations for efficiency and durability, Wear 221 (1), 1–8 (1998).
   Web of Science ®Google Scholar
• R. Coy, Practical applications of lubrication models in engines, Tribol. Int. 31 (10), 563–571 (1998).
   Web of Science ®Google Scholar
• J. Gray and B. Luan, Protective coatings on magnesium and its alloys—a critical review, J. Alloys Comp. 336 (1), 88–113 (2002).
   Web of Science ®Google Scholar
• J. Sun, Y. Pei, S. Li, H. Zhang, and S. Gong, Improvement in ductility of high strength polycrystalline Ni-rich Ni 3 Al alloy produced by EB-PVD, J. Alloys Comp. 614, 196–202 (2014).
   Web of Science ®Google Scholar
• M. Aliofkhazraei, and N. Ali, 7.04 - PVD Technology in Fabrication of Micro- and Nanostructured Coatings A2 - Hashmi, Saleem. In G.F. Batalha, C.J.V. Tyne, and B. Yilbas (eds.), Comprehensive Materials Processing, Elsevier, Oxford, 2014. pp. 49–84.
   Google Scholar
• M. Okumiya and M. Griepentrog, Mechanical properties and tribological behavior of TiN–CrAlN and CrN–CrAlN multilayer coatings, Surf. Coat. Technol. 112 (1), 123–128 (1999).
   Web of Science ®Google Scholar
• D.M. Mattox, Handbook of Physical Vapor Deposition (PVD) Processing. William Andrew, Norwich, NY (2010).
   Google Scholar
• D.M. Mattox and V.H. Mattox. 50 Years of vacuum coating technology and the growth of the society of vacuum coaters. Society of Vacuum Coaters, USA (2007).
   Google Scholar
• C. Metzner and B. Scheffel, Special aspects concerning the electron beam deposition of multi-component alloys. Surface and Coatings Technology 146, 491–497 (2001).
   Web of Science ®Google Scholar
• A. Zoeller, R. Goetzelmann, H. Hagedorn, W. Klug, and K. Matl, Plasma-ion-assisted deposition: A powerful technology for the production of optical coatings. In Optical Science, Engineering and Instrumentation '97. International Society for Optics and Photonics. 196–204 (1997).
   Google Scholar
• S. Schiller, K. Goedicke, J. Reschke, V. Kirchhoff, V Schneider S and F Milde, Pulsed magnetron sputter technology, Surf. Coat. Technol. 61 (1), 331–337 (1993).
   Web of Science ®Google Scholar
• N. Savvides, and B. Window, Unbalanced magnetron ion‐assisted deposition and property modification of thin films, J. Vac. Sci. Technol. A Vac. Surf. Films 4 (3), 504–508 (1986).
   Web of Science ®Google Scholar
• D.G. Teer, Magnetron sputter ion plating, Google Patents (1996).
   Google Scholar
• L. Guzzella and C.H. Onder, Introduction to Modeling and Control of Internal Combustion Engine Systems. Springer (2010).
   Google Scholar
• J. Lin, W.D. Sproul, J.J. Moore, S. Lee, and S. Myers, High rate deposition of thick CrN and Cr 2 N coatings using modulated pulse power (MPP) magnetron sputtering, Surf. Coat. Technol. 205 (10), 3226–3234 (2011).
   Web of Science ®Google Scholar
• C.L. Martin, O. Ajayi, S. Torrel, N. Demas, A. Erdemir, and R. Wei, Effect of coating thickness on tribological performance of CrN in dry sliding contact, Proc. ASME/STLE 2012 International Joint Tribology Conference (2012).
   Google Scholar
• S.C. Tung and H. Gao, Tribological characteristics and surface interaction between piston ring coatings and a blend of energy-conserving oils and ethanol fuels, Wear 255 (7), 1276–1285 (2003).
   Google Scholar
• J. Lin, R. Wei, D.C. Bitsis, and P.M. Lee, Development and evaluation of low friction TiSiCN nanocomposite coatings for piston ring applications, Surf. Coat. Technol. 298, 121–131 (2016).
   Web of Science ®Google Scholar
• B. Zabala, A. Igartua, X. Fernández, C. Priestner, H. Ofner, O. Knaus, M. Abramczuk, P. Tribotte, F. Girot, and E. Roman, Friction and wear of a piston ring/cylinder liner at the top dead centre: Experimental study and modelling, Tribol. Int. 106, 23–33 (2017).
   Web of Science ®Google Scholar
• S. Zhuo, Z. Peijun, Z. Leheng, X. Xinfu, H. Aimin, and Z. Wenquan, Multi-layer compound coating on cast iron piston ring by multi-arc and magnetron sputtering ion compound plating technique, Surf. Coat. Technol. 131 (1), 422–427 (2000).
   Web of Science ®Google Scholar
• H. Hazar, Characterization of MoN coatings for pistons in a diesel engine, Mater. Des. 31 (1), 624–627 (2010).
   Web of Science ®Google Scholar
• D-H Cho, S-A Lee, and Y-Z Lee, The effects of surface roughness and coatings on the tribological behavior of the surfaces of a piston skirt, Tribol. Trans. 53 (1), 137–144 (2009).
   Web of Science ®Google Scholar
• Y. Wang and S.C. Tung, Scuffing and wear behavior of aluminum piston skirt coatings against aluminum cylinder bore, Wear 225, 1100–1108 (1999).
   Web of Science ®Google Scholar
• Q. Mehran, A. Bushroa, and M. Fazal, Evaluation of CrAlN multilayered coatings deposited by PVD magnetron sputtering, J. Adhes. Sci. Technol. 29 (19), 2076–2089 (2015).
   Web of Science ®Google Scholar
• I. Etsion, G. Halperin, and E. Becker, The effect of various surface treatments on piston pin scuffing resistance, Wear 261 (7), 785–791 (2006).
   Web of Science ®Google Scholar
• C. Öner, H. Hazar, and M. Nursoy, Surface properties of CrN coated engine cylinders, Mater. Des. 30 (3), 914–920 (2009).
   Web of Science ®Google Scholar
• D. Hagedorn, F. Löffler, and R. Meeß, Magnetron sputter process for inner cylinder coatings, Surf. Coat. Technol. 203 (5–7), 632–637 (2008).
   Web of Science ®Google Scholar
• G.H. Xu, J.H. Lee, H. Liang, and D. Georing, Tribological properties of solid-lubricating coatings on cylinder bore at low temperature, Wear 257 (1–2), 59–65 (2004).
   Web of Science ®Google Scholar
• P.W. Gold and J. Loos, Wear resistance of PVD-coatings in roller bearings, Wear 253 (3–4), 465–472 (2002).
   Web of Science ®Google Scholar
• D. Yonekura, R.J. Chittenden, and P.A. Dearnley, Wear mechanisms of steel roller bearings protected by thin, hard and low friction coatings, Wear 259 (1), 779–788 (2005).
   Web of Science ®Google Scholar
• C. Brecher, G. Spachtholz, K. Bobzin, E. Lugscheider, O. Knotek, and M. Maes, Superelastic (Cr,Al)N coatings for high end spindle bearings, Surf. Coat. Technol. 200 (5–6), 1738–1744 (2005).
   Web of Science ®Google Scholar
• R. Bayón, A. Igartua, X. Fernández, R. Martínez, R. Rodríguez, J. García, A. De Frutos, M. Arenas, and J. De Damborenea, Corrosion-wear behaviour of PVD Cr/CrN multilayer coatings for gear applications, Tribol. Int. 42 (4), 591–599 (2009).
   Web of Science ®Google Scholar
• R Martins, R Amaro and J Seabra, “Influence of low friction coatings on the scuffing load capacity and efficiency of gears”, Tribol. Int. 41 (4), 234–243 (2008).
   Web of Science ®Google Scholar
• S. Baragetti, Fatigue resistance of steel and titanium PVD coated spur gears, Int. J. Fatigue 29 (9–11), 1893–1903 (2007).
   Web of Science ®Google Scholar
• M. Kapsiz, M. Durat, and F. Ficici, Friction and wear studies between cylinder liner and piston ring pair using Taguchi design method, Adv. Eng. Software 42 (8), 595–603 (2011).
   Web of Science ®Google Scholar
• E.O. Hall, The deformation and ageing of mild steel: II Characteristics of the Lüders deformation, Proc. of the Physical Society. Section B 64 (9), 742 (1951) 0
   Google Scholar
• R. Wei, Plasma enhanced magnetron sputter deposition of Ti–Si–C–N based nanocomposite coatings, Surf. Coat. Technol. 203 (5), 538–544 (2008).
   Web of Science ®Google Scholar
• C.H.O. Dae-Hyun, & L.E.E. Young-Ze, Evaluation of ring surfaces with several coatings for friction, wear and scuffing life. Transactions of Nonferrous Metals Society of China, 19 (4), 992–996 (2009).
   Web of Science ®Google Scholar
• C. Friedrich, G. Berg, E. Broszeit, F. Rick, and J. Holland, PVD Cr x N coatings for tribological application on piston rings, Surf. Coat. Technol. 97 (1), 661–668 (1997).
   Web of Science ®Google Scholar
• J. Lin, Z.L. Wu, X.H. Zhang, B. Mishra, J.J. Moore, and W.D. Sproul, A comparative study of CrNx coatings Synthesized by dc and pulsed dc magnetron sputtering, Thin Solid Films 517 (6), 1887–1894 (2009).
   Web of Science ®Google Scholar
• A.B. Bruno and H.W. Jerome, Theory of Thermal Stresses, John Wiley and Sons, Inc., New York, (1985).
   Google Scholar
• F. Silva, Fatigue on engine pistons–A compendium of case studies, Eng. Fail. Anal. 13 (3), 480–492 (2006).
   Web of Science ®Google Scholar
• M.Y.P. Costa, M.O.H. Cioffi, H.J.C. Voorwald, and V.A. Guimarães, An investigation on sliding wear behavior of PVD coatings, Tribol. Int. 43 (11), 2196–2202 (2010).
   Web of Science ®Google Scholar
• J.C.A. Batista, C Godoy, G. Pintaúde, A. Sinatora, and A. Matthews, An approach to elucidate the different response of PVD coatings in different tribological tests, Surf. Coat. Technol. 174–175, 891–898 (2003).
   Web of Science ®Google Scholar
• I. Etsion, Improving tribological performance of mechanical components by laser surface texturing, Tribol. Lett. 17 (4), 733–737 (2004).
   Web of Science ®Google Scholar
• E.P. Becker, Trends in tribological materials and engine technology, Tribol. Int. 37 (7), 569–575 (2004).
   Web of Science ®Google Scholar
• H. Hazar, The experimental investigation of wear behaviour of a diesel engine with cylinder having ceramic coated surface. Ph.D. thesis, Fırat University (2004).
   Google Scholar
• J.C. Skurka, Elastohydrodynamic lubrication of roller bearings, J. Lubricat.Technol. 92 (2), 281–288 (1970).
   Web of Science ®Google Scholar
• P.M. Lugt, “A review on grease lubrication in rolling bearings” Tribol. Trans. 52 (4), 470–480 (2009).
   Web of Science ®Google Scholar
• M. Kuhn, P.W. Gold, and J. Loos, Wear and friction characteristics of PVD-coated roller bearings. Surface and Coatings Technology, 177, 469–476 (2004).
   Web of Science ®Google Scholar
• J.M. Baek, Y.R. Cho, D.J. Kim, and K.H. Lee, Plasma carburizing process for the low distortion of automobile gears, Surf. Coat. Technol. 131 (1–3), 568–573 (2000).
   Web of Science ®Google Scholar
• M. Faga, G. Gautier, R. Calzavarini, M. Perucca, E.A. Boot, F. Cartasegna, and L. Settineri, AlSiTiN nanocomposite coatings developed via Arc Cathodic PVD: Evaluation of wear resistance via tribological analysis and high speed machining operations, Wear 263 (7), 1306–1314 (2007).
   Google Scholar
• Y. Chunyan, T. Linhai, W. Yinghui, W. Shebin, L. Tianbao, and X. Bingshe, The effect of substrate bias voltages on impact resistance of CrAlN coatings deposited by modified ion beam enhanced magnetron sputtering, Appl. Surf. Sci. 255 (7), 4033–4038 (2009).
   Web of Science ®Google Scholar
• R. Bayón, C. Zubizarreta, R. Nevshupa, J.C. Rodriguez, X. Fernández, U.R. de Gopegui, and A. Igartua, Rolling-sliding, scuffing and tribocorrosion behaviour of PVD multilayer coatings for gears application, Industr. Lubricat. Tribol. 63 (1), 17–26 (2011).
   Web of Science ®Google Scholar