Percussion Laser-Drilled Holes: Characteristics and Characterization Procedure

REFERENCES

• Pandey , P.C. ; Shan , H.S. Modern Machining Processes ; Tata McGraw-Hill Publishing Co. Ltd. : New Delhi , India , 2003 , 23rd Reprint .
   Google Scholar
• Belforte , D.A. Basics of laser drilling . Indus. Laser Rev. 1998 , 13 ( 10 ), 19 – 24 .
   Google Scholar
• van Dijk , M.H.H. Laser drilling of gas turbine components . Indus. Laser Rev. 1994 , 9 ( 10 ), 7 – 12 .
   Google Scholar
• Pandey , N.D. ; Bharti , A. ; Shan , H.S. Fundamentals of laser drilling . In Proc. Workshop on Applications of Lasers in Mechanical Industries , Kolkata , India , 2002 ; 56 – 72 .
   Google Scholar
• Pandey , N.D. ; Shan , H.S. ; Bharti , A. Percussion drilling with laser: hole completion criterion . Intl. J. Adv. Manuf. Technol., available online at www.springerlink.com.springerlink.com , 2005 .
   Google Scholar
• Ferguson , I.W. ; Morrison , M.J. ; Vanderwert , T.L. Drilling holes in turbine engines . Indus. Laser Sol. 2003 , 18 ( 8 ), 13 – 16 .
   Google Scholar
• Rockstroh , T.J. ; Scheidt , D. ; Ash , C. Advances in laser drilling of turbine aerofoils . Indus. Laser Sol. 2002 , 17 ( 8 ), 15 – 21 .
   Google Scholar
• Scott , B.F. Laser machining and fabrication–A review . In Prod. The 17th Intl. Machine Tool Design and Research Conference , Birmingham , UK , 1970 ; 335 – 339 .
   Google Scholar
• Yeo , C.Y. ; Tam , S.C. ; Jana , S. ; Lau , M.W.S. A technical review of the laser drilling of aerospace materials . J. Mat. Proc. Technol. 1994 , 42 , 15 – 49 [CROSSREF] [CSA]
   Web of Science ®Google Scholar
• Ghoreishi , M. ; Low , D.K.Y. ; Li , L. Hole taper control in laser percussion drilling using statistical modelling . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , Florida , USA , 2001 ; 344 – 352 .
   Google Scholar
• Keevil , A.M. Geometric quality aspects of Nd:YAG laser drilled holes in high carbon steel . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , Florida , USA , 2001 ; 306 – 315 .
   Google Scholar
• Yilbas , B.S. Parametric study to improve laser hole drilling process . J. Mat. Proc. Technol. 1997 , 70 , 264 – 273 [CROSSREF] [CSA]
   Web of Science ®Google Scholar
• Ghoreishi , M. ; Low , D.K.Y. ; Li , L. Effects of processing parameters on hole circularity in laser percussion drilling—A statistical model. In Proc. Intl. Congress on Applications of Lasers & Electro-Optics, Florida , USA , 2001; 326–333.
   Google Scholar
• Ng , G.K.L. ; Li , L. An investigation into the role of melt ejection in repeatability of entrance and exit hole diameters in laser percussion drilling . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , Florida , USA , 2001 ; 296 – 305 .
   Google Scholar
• Ng , G.K.L. ; Li , L. The effect of laser peak power and pulse width on the hole geometry repeatability in laser percussion drilling . Optics & Laser Technol. 2001 , 33 , 393 – 402 [CROSSREF] [CSA]
   Web of Science ®Google Scholar
• Rodden , W.S.O. ; Kudesia , S.S. ; Hand , D.P. ; Jones , J.D.C. Correlations between hole properties and pulse parameters in single pulse Nd:YAG laser drilling of aluminium and titanium . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , Florida , USA , 2001 ; 286 – 295 .
   Google Scholar
• Rodden , W.S.O. ; Kudesia , S.S ; Hand , D.P. ; Jones , J.D.C. Use of assist gas in the laser drilling of titanium . J. Laser Appl. 2001 , 13 ( 5 ), 204 – 208 [CSA]
   Web of Science ®Google Scholar
• Low , D.K.Y. ; Li , L. ; Byrd , P.J. The effects of process parameters on spatter deposition in laser percussion drilling . Optics & Laser Technol. 2000 , 32 , 347 – 354 [CROSSREF] [CSA]
   Web of Science ®Google Scholar
• Low , D.K.Y. ; Li , L. ; Byrd , P.J. Combined spatter and hole taper control in Nd:YAG laser percussion drilling . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , Michigan , USA , 2000 ; 11 – 20 .
   Google Scholar
• Dausinger , F. Precise drilling with short pulsed lasers . In High Power Lasers in Manufacturing , Proc. SPIE , Osaka , Japan , 1999 ; Vol. 3888 , 180 – 187 .
   Google Scholar
• Beck , Th. ; Bostanjoglo , G. ; Kugler , N. ; Richter , K. ; Weber , H. Laser beam drilling applications in novel materials for the aircraft industry . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , California , USA , 1997 ; E:93 – 102 .
   Google Scholar
• Lusquinos , F. ; Pou , J. ; Larosi , M. ; Soto , R. ; Perez-Amor , M. The influence of different assisting gases in the Nd:YAG laser drilling of slate . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , California , USA , 1997 ; B:109 – 117 .
   Google Scholar
• van Dijk , M.H.H. ; Heeren , E.P.A. ; Rubingh , J.E. ; Hafkamp , P.H.L. Percussion drilling with high power Nd:YAG lasers . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , California , USA , 1997 ; E:113 – 122 .
   Google Scholar
• Kamalu , J. ; Mclntyre , C. High speed characterisation of laser percussion-drilled holes . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , California , USA , 1997 ; E:103 – 112 .
   Google Scholar
• Low , D.K.Y. ; Li , L. ; Corfe , A.G. Effects of assist gas on the physical characteristics of spatter during laser percussion drilling of NIMONIC 263 alloy . Appl. Surf. Sci. 2000 , 154–155 , 689 – 695 [CROSSREF] [CSA]
   Web of Science ®Google Scholar
• Sharp , C.M. ; Mueller , R.E. ; Murthy , J. ; McCay , M.H. ; Cutcher , J. A novel anti-spatter technique for laser drilling: Applications to surface texturing . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , California , USA , 1997 ; A:41 – 50 .
   Google Scholar
• Low , D.K.Y. ; Li , L. ; Corfe , A.G. The influence of assist gas on the mechanism of material ejection and removal during laser percussion drilling . Proc. Instn. Mech. Engrs. 2000 , 214B , 521 – 527 [CSA]
   Google Scholar
• Wu , Q. ; Ma , Y. ; Jie , J. ; Miao , B. ; Fang , R. ; Chen , X. Hole drilling of INCONEL 718 by high intensity pulsed UV laser . In Proc. Intl. Congress on Applications of Lasers & Electro-Optics , Florida , USA , 2001 ; 248 – 256 .
   Google Scholar
• Baxter , R. Turbine drilling . Indus. Laser Sol. 2002 , 17 ( 2 ), 16 – 19 [CSA]
   Google Scholar
• Chen , X. ; Liu , X. Short pulsed laser machining: How short is short enough? J. Laser Appl. 1999 , 11 ( 6 ), 268 – 272 [CSA]
   Web of Science ®Google Scholar
• Steen , W.M. Laser Material Processing ; Springer-Verlag London : UK , 1991 .
   Google Scholar
• Patel , R.S. The Role of an Assist Gas During Laser-Metal Interaction . Ph.D. thesis , University of Illinois at Urbana Champaign , USA , 1989 .
   Google Scholar
• Yilbas , B.S. ; Sahin , A.Z. ; Da vies , R. Laser heating mechanism including evaporation process initiating laser drilling . Intl. J. Mach. Tools Manufact. 1995 , 35 ( 7 ), 1047 – 1062 [CROSSREF] [CSA]
   Web of Science ®Google Scholar
• Rohde , H. ; Meiners , E. Trepan drilling of fuel injection nozzles with a TEMOO Nd:YAG slab laser . J. Laser Appl. 1996 , 8 , 95–101 [CSA]
   Web of Science ®Google Scholar
• Blackwell , J. ; Thornton , S. Mastering Optics ; McGraw-Hill Book Co. : UK , 1996 .
   Google Scholar
• ASME Y14.5.1M–1994 . Mathematical definitions of dimensioning and tolerancing principles . An American National Standard, ASME , USA , 1994 ; 35 – 48 .
   Google Scholar
• IS: 8000 (Part 1) . Geometric tolerancing on technical drawings . Bureau of Indian Standards , New Delhi , India , 1985 ; 2 – 4 .
   Google Scholar
• Weisman , C. (editor) . Fundamentals of welding . Welding Handbook, 7(1) , American Welding Society : Florida , USA , 1981 ; 297 .
   Google Scholar
• Ramanathan , S. Laser Cutting and Drilling of Ceramics and Ceramic Composites . Ph.D. thesis, Dept. of Mech. Eng. , Pennsylvania State University , USA , 1993 .
   Google Scholar
• Ready , J.F. Industrial Applications of Lasers ; Academic Press , USA , 1997 .
   Google Scholar