Optimization of Injection-Molding Process of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites via Design of Experiments Method: A Case Study

REFERENCES

• Briscoe , B.J. Isolated contacted stress deformations of polymers, the basis for interpreting polymer tribology . Tribology International 1998 , 31 ( 1–3 ), 191 – 196 .
   Web of Science ®Google Scholar
• Khurshudov , A. ; Kato , K. Wear mechanisms in reciprocal scratching of polycarbonate, studied by atomic force microscopy . Wear 1997 , 205 , 1 – 10 .
   Web of Science ®Google Scholar
• Stuart , B.H. Scratch friction studies of polycarbonate . Polym. Testing 1997 , 16 , 517 – 522 .
   Web of Science ®Google Scholar
• Khurshudov , A. ; Kato , K. Wear mechanisms in reciprocal scratching of polycarbonate, studied by atomic force microscopy . Wear 1997 , 205 , 1 – 10 .
   Web of Science ®Google Scholar
• Neves , N.M. ; Isdell , G. ; Pouzada , A.S. ; Powell , P.C. On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates . Polymer Composites 1998 , 19 ( 5 ), 640 – 651 .
   Web of Science ®Google Scholar
• Manikandan , K.C. ; Diwan , S.M. ; Sabu , T. Tensile properties of short sisal fiber reinforced polystyrene composites . J. of Applied Polymer Science 1996 , 60 ( 9 ), 1483 – 1497 .
   Web of Science ®Google Scholar
• Ho , K.C. ; Jeng , M.C. Tribological characteristics of short glass fiber reinforced polycarbonate composites . Wear 1997 , 206 , 60 – 68 .
   Web of Science ®Google Scholar
• Ho , K.C. ; Jeng , M.C. Fiber orientation of short glass fiber reinforced polycarbonate composites under various injection molding conditions . Plastics, Rubber and Composites Processing and Applications 1996 , 25 , 469 – 476 .
   Google Scholar
• Biswas , S.K. ; Vijayan , K. Friction and wear of PTFE – a review . Wear 1992 , 158 , 193 – 211 .
   Web of Science ®Google Scholar
• Bolvari , A. ; Glenn , S. ; Janssen , R. ; Ellis , C. Wear and friction of aramid fiber and polytetrafluoroethylene filled composites . Wear 1997 , 203 , 697 – 702 .
   Web of Science ®Google Scholar
• Palabiyik , M. ; Bahadur , S. Tribological studies of polyamide 6 and high-density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibers . Wear 2002 , 253 , 369 – 376 .
   Web of Science ®Google Scholar
• Cheng , X.H. ; Xue , Y.J. ; Xie , C.Y. Friction and wear of rare-earth modified glass-fiber filled PTFE composites in dry reciprocating sliding motion with impact loads . Wear 2002 , 253 , 869 – 877 .
   Web of Science ®Google Scholar
• Apichartpattanasiri , S. ; Hay , J.N. ; Kukureka , S.N. A study of the tribological behaviour of polyamide 66 with varying injection-moulding parameters . Wear 2001 , 251 , 1557 – 1566 .
   Web of Science ®Google Scholar
• Jeng , M.C. ; Fung , C.P. ; Li , T.C. The study on tribological properties of short glass fiber-reinforced PBT composites for various injection molding process parameters . Wear 2002 , 252 , 934 – 945 .
   Web of Science ®Google Scholar
• Fung , C.P. ; Hwang , J.R. ; Hsu , C.C. The effect of injection molding process parameters on the tensile properties of short glass fiber-reinforced PBT . Polym.-Plast. Technol. Eng. 2003 , 42 , 45 – 63 .
   Web of Science ®Google Scholar
• Douglas , C.M. Design and Analysis of Experiments, , 4th Ed. ; John Wiley and Sons, Inc. , 1997 ; 101 – 245 .
   Google Scholar
• Zalba , B. ; Belén , S. ; Marín , J.M. An experimental study of thermal energy storage with phase change materials by design of experiments . J. of Applied Statistics 2005 , 32 ( 4 ), 321 – 332 .
   Web of Science ®Google Scholar
• Chao , P.Y. ; Hwang , Y.D. An improved Taguchi's method in design of experiments for milling CFRP composite . Inter. J. of Production Research 1997 , 35 ( 1 ), 61 – 66 .
   Web of Science ®Google Scholar
• Pietas; Luis , C.J. A study of optimization of machining parameters for electrical discharge machining of boron carbide . Materials and Manufacturing Processes 2004 , 19 ( 6 ), 1041 – 1070 .
   Web of Science ®Google Scholar
• Lin , T. ; Chananda , B. Quality improvement of an injection-molded product using design of experiments: a case study . Quality Engineering 2004 , 16 ( 1 ), 99 – 104 .
   Google Scholar
• Alagumurthi , N. ; Palaniradja , K. ; Soundararajan , V. Optimization of grinding process through design of experiment (DOE)—A comparative study . Materials and Manufacturing Processes 2006 , 21 ( 1 ), 19 – 21 .
   Web of Science ®Google Scholar
• Myers; Montgomery . Response Surface Methodology, , 2nd Ed. ; John Wiley and Sons : New York , 2002 .
   Google Scholar