370
Views
33
CrossRef citations to date
0
Altmetric
SPECIAL ISSUE

Mechanical Properties of Au Films on Silicon Substrates

, , &
Pages 187-194 | Received 07 Feb 2004, Accepted 22 Jun 2004, Published online: 14 Feb 2007

REFERENCES

  • Madou , M. Fundamentals of Microfabrication ; CRC Press : New York, USA , 2002 ; 497 pp.
  • Holliday , R. ; Goodman , P. Going for the gold . IEE Review 2002 , 48 , 15 – 19 .
  • Knarr , R.F. ; Quon , R.A. Direct force measurements at the smooth gold/mica interface . Langmuir 1998 , 14 ( 22 ), 6414 – 6418 .
  • Gadelhak , M. The MEMS Handbook ; CRC Press : New York, USA , 2002 .
  • Doerner , M.F. ; Nix , W.D. A method for determining the data from depth-sensing indentation instruments . J. Mater. Res. 1986 , 1 , 601 – 609 .
  • King , R.B. Elastic analysis of some punch problems for a layered medium . Inst. J. Solids Structures 1987 , 23 ( 142 ), 1657 – 1664 .
  • Mencik , J. ; Munz , D. ; Quandt , E. ; Weppelmann , E.R. ; Swain , M.V. Determination of elastic modulus of thin layers using nanoindentation. J. Mater. Res. 1997, 12 (9), 2475–2484.
  • Saha , R. ; Nix , W.D. Effects of the substrate on the determination of thin film mechanical properties by nanoindentation . Acta Materila 2002 , 50 ( 1 ), 23 – 28 .
  • Oliver , W.C. ; Pharr , G.M. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments . J. Mater. Res. 1992 , 7 ( 6 ), 1564 – 1583 .
  • Pharr , G.M. ; Oliver , W.C. ; Brotzen , F.R. On the generality of the relationship among contact stiffness, contact area, and elastic-modulus during indentation . J. Mater. Res. 1992 , 7 ( 3 ), 613 – 617 .
  • Nix , W.D. ; Gao , H. Indentation size effects in crystalline materials: a law for strain gradient plasticity . J. Mech. Phys. Solids 1998 , 46 ( 3 ), 411 – 425 .
  • Ma , Q. ; Clarke , D.R. Size-dependent hardness of silver single-crystals . J. Mater. Res. 1995 , 10 ( 4 ), 853 – 863 .
  • Lou , J. ; Shrotriya , P. ; Buchheit , T. ; Yang , D. ; Soboyejo , W.O. Nanoindentation study of plasticity length scale effects in LIGA Ni microelectromechanical systems structures . J. of Mater. Res. 2003 , 18 ( 3 ), 719 – 728 .
  • Zong , Z. ; Soboyejo , W.O. Indentation size effects in face centered cubic single crystal thin films . Materials Science and Engineering A 2005 , 404 ( 1–2 ), 281 – 290 .
  • Xiang , Y. ; Chen , X. ; Vlassak , J.J. The mechanical properties of electroplated Cu thin films measured by means of the bulge test technique . Mat. Res. Soc. Symp. Proc. 2002 , 695 , 189 – 194 .
  • Field , D.P. Recent advances in the application of orientation imaging . Ultramicroscopy 1997 , 67 ( 1–4 ), 1 – 9 .
  • Alam , M.N. ; Blackman , M. High-angle kikuchi patterns . Proceedings of Royal Society of London A 1954 , 221 , 224 – 242 .
  • Bhushan , B. ; Li , X. Micromechanical and tribological characterization of doped single-crystal silicon and polysilicon films for microelectromechanical systems devices . Journal of Materials Research 1997 , 12 ( 1 ), 54 – 63 .
  • Gao , H. ; Huang , Y. ; Nix , W.D. Modeling plasticity at the micrometer scale . Naturwissenschaften 1999 , 86 ( 11 ), 507 – 515 .
  • Fleck , N.A. ; Hutchinson , J.W. A reformulation of strain gradient plasticity . Journal of the Mechanics and Physics of Solids 2001 , 49 ( 10 ), 2245 – 2271 .
  • Soboyejo , W.O. Mechanical Properties of Engineered Materials ; Marcel Dekker Inc. : New York, USA , 2003 ; 93 pp.
  • Jung , Y.S. Study on texture evolution and properties of silver thin films prepared by sputtering deposition . Applied Surface Science 2004 , 221 ( 1–4 ), 281 – 287 .
  • Strehle , S. ; Menzel , S. ; Wendrock , H. ; Acker , J. ; Wetzig , K. SEM/EBSD texture analysis of electrochemically deposited CuAg-alloy thin films . Microsc. Microanal. 2003 , 9 ( Suppl. 3 ), 272 .
  • Li X. ; Yang , Z. Effects of sputtering conditions on the structure and magnetic properties of Ni-Fe Films . Materials Science and Engineering B 2004 , 106 ( 1 ), 41 – 45 .
  • Chang , J.F. ; Kuo , H.H. ; Leu , I. ; Hon , M.H. The effects of thickness and operation temperature on ZnO:Al thin film CO gas sensor . Sensors and actuators B: Chemical 2002 , 84 ( 2–3 ), 258 – 264 .
  • Aguilar , M. ; Quintana , P. ; Oliva , A.I. Thickness-stress relations in aluminum thin films . Materials and Manufacturing Processes 2002 , 17 ( 1 ), 57 – 65 .
  • dePablo , P.J. ; Colchero , J. ; Gomez-Herrero , J. ; Asenjo , A. ; Luna , M. ; Serena , P.A. ; Baro , A.M. Ratchet effect in surface electromigration detected with scanning force microscopy in gold micro-stripes . Surface Science 2000 , 464 ( 2–3 ), 123 – 130 .
  • Harris , K.E. ; King , A.H. Direct observation of diffusional creep via tem in polycrystalline thin films of gold . Acta Mater. 1998 , 46 ( 17 ), 6195 – 6203 .
  • Son , D. ; Jeong , J.H. ; Kwon , D. Film-thickness considerations in microcantilever-beam test in measuring mechanical properties of metal thin film . Thin Solid Films 2003 , 437 ( 1–2 ), 182 – 187 .
  • Elmustafa , A.A. ; Eastman , J.A. ; Rittner , M.N. ; Weertman , J.R. ; Stone , D.S. Indentation size effect: large grained aluminum versus nanocrystalline aluminum-zirconium alloys . Scripta Mater. 2000 , 43 ( 10 ), 951 – 955 .
  • Xu , Z. ; Rowcliffe , D. Deriving mechanical properties of soft coatings using nanoindentation: an application of mechanism-based strain gradient plasticity . Surface and Coatings Technology 2002 , 157 ( 2–3 ), 231 – 237 .
  • Smith , J.F. ; Zheng , S. High temperature nanoscale mechanical property measurements . Surface Engineering 2000 , 16 ( 2 ), 143 – 146 .
  • Espinosa H.D. ; Prorok , B. Size effects on the mechanical behavior of gold thin films . Journal of Materials Science 2003 , 38 ( 20 ), 4125 – 4128 .
  • Majumder , S. ; McGruer , N.E. ; Adams , G.G. ; Zavracky , P.M. ; Morrison , R.H. ; Krim , J. Study of contacts in an electrostatically actuated microswitch . Sensors and Actuators A - Physical 2001 , 93 ( 1 ), 19 – 26 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.