Machinability of Abrasion Resistance Cast Iron with PCBN Cutting Tools

REFERENCES

• Nilsson , A ; Stahl , J.E. ; Hakan , C. Iron–base alloy containing chromium–tungsten carbide and a method of producing it . Patent WO0188213, Sweden .
   Google Scholar
• Nilsson , A. Technical Report, PEC-0203-NCS0(22/swe)KH, Pro-EngCo Tooling .
   Google Scholar
• Mechanical properties and microstructure Carbide Steel, Technical report, ProEngCo Tooling AB .
   Google Scholar
• Liu , J. ; Yamazaki , K. ; Ueda , H. ; et al. . Machinability of pearlitic cast iron with cubic boron nitirde (CBN) cutting tool . J. Manufacturing Science 2002 , 124 , 820 – 832 .
   Google Scholar
• Chou , K.Y. ; Evans , C.J. Tool wear mechanism in continuous cutting of hardened tool steels . Wear 1997 , 212 , 59 – 65 .
   Web of Science ®Google Scholar
• Kishawy , H.K. ; Elbestawi , M.A. Effects of process parameters on material side flow during hard turning . International Journal of Machine Tools and Manufacture 1999 , 39 , 1017 – 1030 .
   Web of Science ®Google Scholar
• Zhou , J.M. ; Andersson , M. ; Stahl , J.E. The monitoring of flank wear on the CBN tool in the hard turning process . Int. J. Adv. Manuf. Technol. 2002 , 22 , 697 – 702 .
   Google Scholar
• Tönshoff , H.K. ; Arendt , C. ; Amor , R.B. Cutting hardened steel . Ann. CIRP 2000 , 49 ( 2 ), 547 – 566 .
   Google Scholar
• Naruki , N. ; Yamane , Y. Tool wear and cutting temperature of CBN tools in machining of hardened steels . Ann. CIRP 1979 , 28 , 23 – 28 .
   Google Scholar
• Wayne , S.F. ; Buljan , S.T. ; Jahanmir , S. Microstructure and wear resistance of silicon nitride composites . Friction and Wear of Ceramic ; Marcel Dekker : New York , 1993 ; 261 – 285 .
   Google Scholar
• Arsecularatne , J.A. ; Zhang , L.C. ; Montross , C. Wear and tool life of tungsten carbide, PCBN and PCD cutting tools . International Journal of Machine Tools and Manufacture 2006 , 46 , 482 – 491 .
   Web of Science ®Google Scholar
• Liew , W.Y.H. ; Ngoi , B.K.A. ; Lu , Y.G. Wear characteristics of PCBN tools in the ultra-precision machining of stainless steel at low speeds . Wear 2003 , 9430 , 1 – 13 .
   Google Scholar
• El-Wardany , T.I. ; Kishawy , H.A. ; Elbestawi , M.A. Surface integrity of die material in high speed hard machining, Part 1: Micrographical analysis . Journal of Manufacturing Science and Engineering 2000 , 122 , 620 – 631 .
   Web of Science ®Google Scholar
• El-Wardany , T.I. ; Kishawy , H.A. ; Elbestawi , M.A. Surface integrity of die material in high speed hard machining, Part 2: Microhardness variations and residual stresses. Journal of Manufacturing Science and Engineering 2000, 632–641.
   Google Scholar
• Barry , J. ; Byrne , G. Cutting tool wear in the machining of hardened steels: Part II: cubic boron nitride cutting tool wear . Wear 2001 , 247 ( 2 ), 152 – 160 .
   Google Scholar
• Poulachon , G. ; Moisan , A. ; Jawahir , I.S. Tool-wear mechanisms in hard turning with polycrystalline cubic boron nitride tools . Wear 2001 , 250 ( 1–12 ), 576 – 586 .
   Google Scholar
• König , W. ; Neises , A. Wear mechanisms of ultrahard, non-metallic cutting materials . Wear 1993 , 162–164 , 12 – 21 .
   Web of Science ®Google Scholar
• Kishawy , H.A. ; Elbestawi , M.A. Effects of process parameters on material side flow during hard turning . International Journal of Machine Tools and Manufacture 1999 , 39 ( 7 ), 1017 – 1030 .
   Web of Science ®Google Scholar
• Kishawy , H.A. ; Dumitrescu , H. ; Elbestawi , M.A. Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy . International Journal of Machine Tools and Manufacture 2005 , 45 ( 2 ), 219 – 227 .
   Google Scholar