Effect of Feed Rate on Tool Wear in Milling of Al-4%Cu/B₄ C_p Composite

REFERENCES

• Koczak , M.J. ; Khatri , S.C. ; Allison , J.E. ; Bader , M.G. Metal-matrix composites for ground vehicle, aerospace and industrial applications. In Fundamentals of Metal-Matrix Composites ; Suresh , S. ; Mortensen , A. ; Needleman , A. , Eds.; Butterworth-Heinemann , Boston, USA , 1993.
   Google Scholar
• Quigley , O. ; Monaghan , J. ; O'Reilly , P. Factors affecting the machinability of an Al/SiC metal-matrix composite . J. Materials Processing Technology 1994 , 43 , 21 – 36 .
   Web of Science ®Google Scholar
• Hung , N.P. ; Boey , F.Y.C. ; Khor , K.A. ; Phua , Y.S. ; Lee , H.F. Machinability of aluminum alloys reinforced with silicon carbide particulates . J. Materials Processing Technology 1996 , 56 , 966 – 977 .
   Web of Science ®Google Scholar
• Chambers , A.R. The machinability of light alloy MMCs . Composites Part A 1996 , 27A , 143 – 147 .
   Web of Science ®Google Scholar
• El-Gallab , M. ; Sklad , M. Machining of Al/SiC particulate metal-matrix composites Part I: Tool performance . J. Materials Processing Technology 1998 , 83 , 151 – 158 .
   Web of Science ®Google Scholar
• Şahin , Y. The effects of various multilayer ceramic coatings on the wear of carbide cutting tools when machining metal matrix composites . Surface and Coatings Technology 2005 , 199 , 112 – 117 .
   Web of Science ®Google Scholar
• Davim , J.P. Diamond tool performance in machining metal-matrix composites . J. Materials Processing Technology 2002 , 128 , 100 – 105 .
   Web of Science ®Google Scholar
• Şahin , Y. ; Sur , G. The effect of Al2O3, TiN and Ti(C,N) based CVD coatings on tool wear in machining metal matrix composites . Surface Coatings and Technology 2004 , 179 , 349 – 355 .
   Web of Science ®Google Scholar
• Andrewes , C.J.E. ; Feng , H.-Y. ; Lau , W.M. Machining of an aluminum/SiC composite using diamond inserts . J. Materials Processing Technology 2000 , 102 , 25 – 29 .
   Web of Science ®Google Scholar
• Çiftçi , İ. ; Türker , M. ; Şeker , U. Evaluation of tool wear when machining SiC p -reinforced Al-2014 alloy matrix composites . Materials and Design 2004 , 25 , 251 – 255 .
   Web of Science ®Google Scholar
• Quan , Y.M. ; Zhou , Z.H. ; Ye , B.Y. Cutting process and chip appearance of Al matrix composites reinforced by SiC particles . J. Materials Processing Technology 1999 , 91 , 231 – 235 .
   Web of Science ®Google Scholar
• Lin , C.B. ; Hung , Y.W. ; Liu , W.-C. ; Kang , S.-W. Machining and fluidity of 356Al/SiC(p) composites . J. Materials Processing Technology 2001 , 110 , 152 – 159 .
   Web of Science ®Google Scholar
• Çiftçi , İ. ; Türker , M. ; Şeker , U. CBN cutting tool wear during machining of particulate reinforced MMCs . Wear 2004 , 257 , 1041 – 1046 .
   Web of Science ®Google Scholar
• Tomac , N. ; Tonnesson , K. Machining of particulate Al matrix composites . Ann. CIRP 1992 , 41 , 55 – 58 .
   Google Scholar
• Cronjager , L. ; Meister , D. Turning of MMCs . In Proceedings of the Second European Conference on Advanced Materials and Processes ; Cambridge , 1982 ; Vol. 2 , 73 – 80 .
   Google Scholar
• Şahin , Y. ; Kok , M. ; Çelik , H. Tool wear and surface roughness of Al2O3 particle-reinforced aluminum alloy composites . J. Materials Processing Technology 2002 , 128 , 280 – 291 .
   Web of Science ®Google Scholar
• Joshi , S.S. ; Ramakrishnan , N. ; Ramakrishnan , P. Analysis of chip breaking during orthogonal machining of Al/SiCp composites . Journal of Materials Processing Technology 1999 , 88 , 90 – 96 .
   Web of Science ®Google Scholar
• Sur , G. M.Sc. Thesis , Machinability and production of aluminum alloy composites ; Instιtute of Science and Technology of Gazi University , Ankara , Turkey , January 2002 .
   Google Scholar
• Yanming , Q. ; Zehna , Z. Tool wear and its mechanism for cutting SiCp reinforced Al matrix composites . Journal of Materials Processing Technology 2000 , 100 , 194 – 199 .
   Web of Science ®Google Scholar
• Weinert , K. ; König , W. A consideration of tool wear mechanism when machining metal matrix composites (MMC) . Annals of the CIRP 1993 , 42 , 95 – 98 .
   Google Scholar
• Brun , M.K. ; Lee , M. ; Gorsler , F. Wear characteristics of various hard materials for machining SiC-reinforced aluminum alloy . Wear 1985 , 104 , 21 – 29 .
   Web of Science ®Google Scholar
• Coelho , R.T. ; Yamada , S. ; IeRoux , T. ; Aspinwall , D.K. ; Wise , M.L.H. Conventional machining of an aluminum based SiC reinforced metal matrix composite (MMC) alloy . Proc. of the 30th MATADOR , Manchester 1993 , pp. 125 – 133 .
   Google Scholar
• Cronjager , L. ; Meister , D. Machining of fibre and particle-reinforced aluminum . Annals of CIRP 1992 , 41 , 63 – 66 .
   Google Scholar
• Lane , C.T. Machining characteristics of particulate-reinforced aluminum . In Fabrication of Particulates Reinforced Metal Composites ; ASM : Ohio , USA 1990 , pp. 195 – 201 .
   Google Scholar
• Lane , C.T. The effect of different reinforcement on PCD tool life for aluminum composites. Machining of Composite Materials ; Proc. of the ASM/TMS Materials Week Symposium , Chicago , Illinois , USA , 1–5 Nov. 1992 , pp. 17 – 27 .
   Google Scholar
• Chandrasekaran , H. ; Johansson , J.-O. On the behaviour of fibre/particle reinforced aluminum alloy matrix composites in milling and grinding ; 2nd Int. Conf. on Machining of Advanced Materials (MAM) , Aachen Germany , 1996 .
   Google Scholar
• Karakaş , M.S. ; Acιr , A. ; Übeyli , M. ; Ögel , B. Effect of cutting speed on tool performance in milling of B4C p reinforced aluminum metal matrix composites . Journal of Materials Processing Technology 2006 , 178 , 241 – 246 .
   Web of Science ®Google Scholar
• Übeyli , M. ; Karakaş , M.S. ; Acιr , A. ; Ögel , B. Study on performance of uncoated and coated tools in milling of Al-4%Cu/B4C metal matrix composites . Materials Science and Technology 2007 , 23 ( 8 ), 945 – 950 .
   Web of Science ®Google Scholar