Influence of Yield Criteria in the Prediction of Strain Distribution and Residual Stress Distribution in Sheet Metal Formability Analysis for a Commercial Steel

REFERENCES

• Lee , J.K. ; Kinzel , G.L. ; Wagoner , R.H. LDH benchmark. In Proceedings of Numisheet 96, 3rd International Conference: Numerical Simulation of 3-D Sheet Metal Forming Processes, 1996, Dearborn, USA.
   Google Scholar
• Tezuka , A. ; Kim , S.H. ; Huh , H. Process parameter design in sheet stamping processes with rigid-plastic finite element analysis. In Paper no. 20000011, Transactions of JSCES, 2000.
   Google Scholar
• Hariharan , K. ; Balaji , C. Material optimization: A case study using sheet metal-forming analysis . Journal of Materials Processing Technology 2009 , 209 , 324 – 331 .
   Web of Science ®Google Scholar
• Asgari , A. ; Pereira , M. ; et al. . Design of experiments and springback prediction for AHSS automotive components with complex geometry . In Proceedings of Numisheet 2005 , Smith , L.M. , Pourboghrat , F. , Yoon , J.W. , Stoughton , T.B. , Eds.; Detroit , USA , 2005 .
   Google Scholar
• et al. . Die face engineering based springback compensation strategy and implementation . In Proceedings of Numisheet 2005 , Smith , L.M. , Pourboghrat , F. , Yoon , J.W. , Stoughton , T.B. , Eds.; Detroit , USA , 2005 .
   Google Scholar
• Yan , B. ; Belanger , P. ; Citrin , K. Effect of forming strain on fatigue performance of a mild automotive steel. SAE 2001-01-0083, In SAE World Congress; Detroit, USA, 2001.
   Google Scholar
• Wang , W. ; Chen , G. ; Lin , Z. The study on the fatigue FEM analysis considering the effect of stamping . Materials & Design 2009 , 30 , 1588 – 1594 .
   Web of Science ®Google Scholar
• Hill , R. Mathematical Theory of Plasticity ; Oxford University Press : Oxford , 1950 .
   Google Scholar
• Logan , R.W. ; Hosford , W.F. Upper-bound anisotropic yield locus calculations assuming ⟨111⟩ pencil glide . International Journal of Mechanical Sciences 1980 , 22 , 419 – 430 .
   Web of Science ®Google Scholar
• Barlat , F. ; Lian , J. Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions . International Journal of Plasticity 1989 , 5 , 51 – 66 .
   Web of Science ®Google Scholar
• Banabic , D. ; Kuwabara , T. ; Balan , T. ; Comsa , D.S. An anisotropic yield criterion for sheet metals . Journal of Materials Processing Technology 2004 , 157–158 , 462 – 465 .
   Web of Science ®Google Scholar
• Banabic , D. ; Aretz , H. ; Comsa , D.S. ; Paraianu , L. An improved analytical description of orthotropy in metallic sheets . International Journal of Plasticity 2005 , 21 , 493 – 512 .
   Web of Science ®Google Scholar
• Wang , L. ; Lee , T.C. The effect of yield criteria on the forming limit curve prediction and the deep drawing process simulation . International Journal of Machine Tools and Manufacture 2006 , 46 , 988 – 995 .
   Web of Science ®Google Scholar
• Barlat , F. Crystallographic texture, anisotropic yield surfaces and forming limits of sheet metals . Materials Science and Engineering 1987 , 91 , 55 – 72 .
   Google Scholar
• Friedman , P.A. ; Pan , J. Effects of plastic anisotropy and yield criteria on prediction of forming limit curves . International Journal of Mechanical Sciences 2000 , 42 , 29 – 48 .
   Web of Science ®Google Scholar
• Zhao , L. ; Sowerby , R. ; Sklad , M.P. A theoretical and experimental investigation of limit strains in sheet metal forming . International Journal of Mechanical Sciences 1996 , 38 , 1307 – 1317 .
   Web of Science ®Google Scholar
• Avila , A.F. ; Vieira , E.L.S. Forming-limit diagram numerical predictions: Yield criteria studies . Communications in Numerical Methods in Engineering 2003 , 19 , 223 – 232 .
   Google Scholar
• Duchene , L. ; Habraken , A.M. Analysis of the sensitivity of FEM predictions to numerical parameters in deep drawing simulations . European Journal of Mechanics – A: Solids 2005 , 24 , 614 – 629 .
   Web of Science ®Google Scholar
• Hopperstad , O.S. ; Berstad , T. ; Ilstad , H. ; Lademo , O.G. ; Langseth , M. Effects of the yield criterion on local deformations in numerical simulation of profile forming. Journal of Materials Processing Technology 1998, 80–81, 551–555.
   Web of Science ®Google Scholar
• ASTM E8/E8M-09 . Standard Test Methods for Tension Testing of Metallic Materials ; ASTM International : West Conshohocken , PA , 2008 , doi: DOI:10.1520/E0008_E0008M-09 .
   Google Scholar
• ASTM E517-00 . Standard Test Method for Plastic Strain Ratio r for Sheet Metal ; ASTM International : West Conshohocken , PA , 2006 , doi: DOI:10.1520/E0517-00R06E01 .
   Google Scholar
• Moreira , L.P. ; Ferron , G. Influence of the plasticity model in sheet metal forming simulations . Journal of Materials Processing Technology 2004 , 155–156 , 1596 – 1603 .
   Web of Science ®Google Scholar
• Mattiasson , K. ; Sigvant , M. On the influence of the yield locus shape in the simulation of sheet stretch forming. In Proceedings of Numisheet 2005, Smith, L.M., Pourboghrat, F., Yoon, J.W., Stoughton, T.B., Eds.; Detroit, USA, 2005.
   Google Scholar
• Liao , K.C. ; Pan , J. ; Tang , S.C. Effects of yield surface shape on sheet metal forming simulations . International Journal for Numerical Methods in Engineering 1998 , 41 , 559 – 584 .
   Web of Science ®Google Scholar
• Hallquist , J.O. (Ed). LSDYNA Manual ; Livermore Software Technology Corporation : California , USA , 2006 .
   Google Scholar
• Lee , B.H. ; Keum , Y.T. ; Wagoner , R.H. Modeling of the friction caused by lubrication and surface roughness in sheet metal forming . Journal of Materials Processing Technology 2002 , 130–131 , 60 – 63 .
   Web of Science ®Google Scholar
• Worswick , M.J. , Ed. Numerical simulation of sheet metal forming, Chapter 8 In Metal Forming Science and Practice, Lenard, J.G., Ed.; Elsevier Science Ltd.: Oxford, 2000.
   Google Scholar
• Pijlman , H.H. ; Huétink , J. ; Meinders , T. ; Carleer , B.D. ; Vegter , H. The implementation of the Vegter yield criterion and a physically based hardening rule in finite elements. In Proceedings of Conference of the International Association of Computational Mechanics, IACM, June–July 1998, Argentina, 1998.
   Google Scholar
• Moreira , L.P. ; Ferron , G. ; Ferran , G. Experimental and numerical analysis of the cup drawing test for orthotropic metal sheets . Journal of Materials Processing Technology 2000 , 108 , 78 – 86 .
   Web of Science ®Google Scholar
• Wang , W. ; Wagoner , R.H. ; Wang , X.J. Measurement of friction under sheet forming conditions . Metallurgical and Materials Transactions A 1996 , 27A , 3971 – 3981 .
   Google Scholar
• Sriram , S. ; Wagoner , R.H. Failure prediction with limiting dome height test . International Journal of Forming Processes 1998 , 1 , 97 – 117 .
   Google Scholar
• Banabic , D. ; Cosovici , G. ; Comsa , D.S. ; Wagner , S. ; Siegert , K. Validation of the anisotropic yield criteria through bulge test. In International Conference on Hydroforming; Germany, 2003.
   Google Scholar