Comparison of Dry and Wet End Milling of AISI 316 Stainless Steel

REFERENCES

• Nordin , M. ; Sundström , R. ; Selinder , T.I. ; Hogmark , S. Wear and failure mechanisms of multilayered PVD TiNrTaN coated tools when milling austenitic stainless steel. Surface and Coatings Technology 2000, 133–134, 240–246.
   Google Scholar
• Kim , S.W. ; Lee , D.W. ; Kang , M.C. ; Kim , J.S. Evaluation of machinability by cutting environments in high-speed milling of difficult-to-cut materials . J. Mater. Proces. Technol. 2001 , 111 , 256 – 260 .
   Google Scholar
• Su , Y. ; He , N. ; Li , L. ; Li , X.L. An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4 V . Wear 2006 , 261 , 760 – 766 .
   Web of Science ®Google Scholar
• Stanford , M. ; Lister , P.M. ; Kibble , K.A. Investigation into the effect of cutting environment on tool life during the milling of a BS970-080A15 (En32b) low carbon steel . Wear 2007 , 262 , 1496 – 1503 .
   Web of Science ®Google Scholar
• Thepsonthi , T. ; Hamdi , M. ; Mitsui , K. Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills . Int. Journal of Machine Tools and Manuf. 2009 , 49 , 156 – 162 .
   Google Scholar
• Vieira , J.M. ; Machado , A.R. ; Ezugwu , E.O. Performance of cutting fluids during face milling of steels . J. Mater. Proces. Technol. 2001 , 116 , 244 – 251 .
   Web of Science ®Google Scholar
• Maranhã , O.C. ; Davim , J.P. Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation . Simulation Modelling Practice and Theory 2010 , 18 , 139 – 156 .
   Google Scholar
• Ciftci , I. Machining of austenitic stainless steels using CVD multi-layer coated cemented carbide tools . Tribology International 2006 , 39 , 565 – 569 .
   Web of Science ®Google Scholar
• Kuram , E. Investigation of vegetable-based cutting fluids performance in drilling. M.Sc. Thesis, Gebze Institute of Technology, (in Turkish) 2009.
   Google Scholar
• ISCAR E-catalog. Available at www.iscar.com (last accessed May 2010).
   Google Scholar
• Abou-El-Hossein , K.A. Cutting fluid efficiency in end milling of AISI 304 stainless steel . Industrial Lubrication and Tribology 2008 , 60 ( 3 ), 115 – 120 .
   Web of Science ®Google Scholar
• Wu , C.H. ; Chien , C.H. Influence of lubrication type and process conditions on milling performance . Proc. IMechE Part B: J. Engineering Manufacture 2007 , 221 , 835 – 843 .
   Google Scholar
• Stanford , M. ; Lister , P.M. Investigation into the relationship between tool-wear and cutting environments when turning EN32 steel. Industrial Lubrication and Tribology 2004, 56 (2–3), 114–121.
   Google Scholar
• Diniz , A.E. ; Ferreira , J.R. ; Filho , F.T. Influence of refrigeration/lubrication condition on SAE 52100 hardened steel turning at several cutting speeds . Int. Journal of Machine Tools and Manuf. 2003 , 43 , 317 – 326 .
   Web of Science ®Google Scholar
• Rahman , M. ; Kumar , A.S. ; Salam , M.U. Experimental evaluation on the effect of minimal quantities of lubricant in milling . Int. Journal of Machine Tools and Manuf. 2002 , 42 , 539 – 547 .
   Web of Science ®Google Scholar
• Li , H.Z. ; Zeng , H. ; Chen , X.Q. An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts . J. Mater. Proces. Technol. 2006 , 180 , 296 – 304 .
   Web of Science ®Google Scholar
• Yigit , R. ; Celik , E. ; Findik , F. ; Koksal , S. Effect of cutting speed on the performance of coated and uncoated cutting tools in turning nodular cast iron . J. Mater. Proces. Technol. 2008 , 204 , 80 – 88 .
   Google Scholar
• Noordin , M.Y. ; Venkatesh , V.C. ; Chan , C.L. ; Abdullah , A. Performance evaluation of cemented carbide tools in turning AISI 1010 steel . J. Mater. Proces. Technol. 2001 , 116 , 16 – 21 .
   Web of Science ®Google Scholar
• Koshy , P. ; Dewes , R.C. ; Aspinwall , D.K. High speed end milling of hardened AISI D2 tool steel (∼58 HRC) . J. Mater. Proces. Technol. 2002 , 127 , 266 – 273 .
   Web of Science ®Google Scholar
• Groover , M.P. Fundamentals of Modern Manufacturing, Materials, Processes, and Systems, , 3rd Ed. ; Wiley : New York , 2007 .
   Google Scholar
• Korkut , I. ; Donertas , M.A. The influence of feed rate and cutting speed on the cutting forces, surface roughness and tool–chip contact length during face milling . Mater. Design 2007 , 28 , 308 – 312 .
   Web of Science ®Google Scholar