Optimization of Machining Parameters for Surface Roughness and Burr Height in Drilling Hybrid Composites

REFERENCES

• Gaitonde , V.N. ; Karnik , S.R. ; Siddeswarapa , B. ; Achyutha , B.T. Integrating Box-Behnken design with genetic algorithm to determine the optimal parametric combination for minimizing burr size in drilling of AISI 316 L stainless steel . Int. J. Adv. Manuf. Technol. 2008 , 37 , 230 – 240 .
   Web of Science ®Google Scholar
• Sahoo , P. ; Barman , T.K. ; Routara , B.C. Fractal dimension modelling of surface profile and optimisation in CNC end milling using response surface method . Int. J. Manuf. Res. 2008 , 3 , 360 – 377 .
   Google Scholar
• Bhowmick , S. ; Alpas , A.T. Minimum quantity lubrication drilling of aluminum-silicon alloys in water using diamond-like carbon coated drills . Int. J. Mach. Tools Manuf. 2008 , 48 , 1429 – 1443 .
   Web of Science ®Google Scholar
• Koelsch , J. Divining edge quality by reading the burrs . Qual. Magaz. 2001 , 3 , 24 – 28 .
   Google Scholar
• Min , S. ; Dornfeld , D.A. ; Nakao , Y. Influence of exit surface angle on drilling burr formation . ASME J. Manuf. Sci. Eng. 2003 , 125 ( 4 ), 637 – 644 .
   Web of Science ®Google Scholar
• Box , G.E.P. ; Draper , N.R. Empirical Model Building and Response Surfaces ; John Wiley and Sons : New York , 1987 .
   Google Scholar
• Kilickap , E. ; Huseyinogl , M. Selection of optimum drilling parameters on burr height using response surface methodology and genetic algorithm in drilling of AISI 304 stainless steel . Materials and Manufacturing Processes 2010 , 25 , 1041 – 1047 .
   Web of Science ®Google Scholar
• Palanikumar , K. Modeling and analysis of delamination factor and surface roughness in drilling GFRP composites . Materials and Manufacturing Processes 2010 , 25 , 1059 – 1067 .
   Web of Science ®Google Scholar
• Latha , B. ; Senthilkumar , V.S. Modeling and analysis of surface roughness parameters in drilling GFRP composites using fuzzy logic . Materials and Manufacturing Processes 2010 , 25 , 817 – 827 .
   Web of Science ®Google Scholar
• Zhang , J.Z. ; Chen , J.C. Surface roughness optimization in a drilling operation using the Taguchi design method . Materials and Manufacturing Processes 2009 , 24 , 459 – 467 .
   Web of Science ®Google Scholar
• Bassoli , E. ; Iuliano , L. ; Salmi , S. Deep drilling of aluminium die-cast parts: Surface roughness, dimensional tolerance, and tool-chip interaction . Materials and Manufacturing Processes 2010 , 25 , 442 – 449 .
   Web of Science ®Google Scholar
• Ozel , C. ; Kilickap , E. Optimisation of surface roughness with GA approach in turning 15% SiCp reinforced AlSi7Mg2 MMC material . Int. J. Mach. Machinability Mater. 2006 , 1 ( 4 ), 476 – 487 .
   Google Scholar
• Harrington , E.C. Jr. The desireability function . Industrial Quality Control 1965 , 21 , 494 – 498 .
   Google Scholar
• Prakash , S. ; Palanikumar , K. ; Manoharan , N. Optimization of delamination factor in drilling medium-density fiberboards (MDF) using desirability-based approach . Int. J. Advan. Manuf. Technol. 2009 , 45 , 370 – 381 .
   Web of Science ®Google Scholar
• Sen , M. ; Shan , H.S. Optimal selection of machining conditions in the electrojet drilling process using hybrid NN-DF-GA approach . Materials and Manufacturing Processes 2006 , 21 , 349 – 356 .
   Web of Science ®Google Scholar
• Kumar , A. ; Maheshwar , S. ; Sharma , C. ; Ber , N. A study of multiobjective parametric optimization of silicon abrasive mixed electrical discharge machining of tool steel . Materials and Manufacturing Processes 2010 , 25 , 1041 – 1047 .
   Web of Science ®Google Scholar
• Krishnamurthy , L. ; Sridhara , B.K. ; Abdul Budan , D. Comparative study on the machinability aspects of aluminum silicon carbide and aluminum graphite composites . Materials and Manufacturing Processes 2007 , 22 ( 7 ), 903 – 908 .
   Web of Science ®Google Scholar
• Montgomery , D.C. Design and Analysis of Experiments ; Wiley : New York , 2001 .
   Google Scholar
• Karthikeyan , R. ; Raghukandan , K. ; Nagarazan , R.S. ; Pai , B.C. Optimizing the milling characteristics of Al-SiC particulate composites . Metals and Materials 2000 , 6 ( 6 ), 539 – 547 .
   Google Scholar
• Palanikumar , K. ; Karthikeyan , R. Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites . Materials and Design 2007 , 28 , 1584 – 1591 .
   Web of Science ®Google Scholar
• Basavarajappa , S. ; Chandramohan , G. ; Davim , J.P. Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques . Journal of Materials Processing Technology 2008 , 196 , 332 – 338 .
   Web of Science ®Google Scholar
• Palanikumar , K. Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling . Int. J. Adv. Manuf. Technol. 2006 , 36 , 19 – 27 .
   Web of Science ®Google Scholar
• Ramesh , S. ; Karunamoorthy , L. ; Ramakrishnan , R. Surface roughness analysis in machining of titanium alloy . Materials and Manufacturing Processes 2008 , 23 , 175 – 182 .
   Web of Science ®Google Scholar