High Speed Twin Roll Casting of Aluminum-Copper Strips with Layered Structure

REFERENCES

• Guo , Y. ; Qiao , G. ; Jian , W. ; Zhi , X. Microstructure and tensile behavior of Cu–Al multi-layered composites prepared by plasma activated sintering . Materials Science and Engineering A 2010 , 527 , 5234 – 5240 .
   Web of Science ®Google Scholar
• Alman , D.E. ; Dogan , C.P. ; Hawk , J.A. ; Rawers , J.C. Processing, structure and properties of metal-intermetallic layered composites . Materials Science and Engineering A 1995 , 192–193 , 624 – 632 .
   Web of Science ®Google Scholar
• Kecskes , L. ; Butler , B. ; Oniashvili , G. ; Aslamazishvili , Z. ; Zakharov , G. ; Peikrishvili , A. Effect of Titanium-Aluminum ratio on the thermal explosion processing of TiAl-TiB0.6 layered composites. Materials and Manufacturing Processes 2011, 26 (9), 1157–1163.
   Web of Science ®Google Scholar
• Kumar , K.S. Intermetallic-matrix composites: An overview . Composites Science and Technology 1994 , 52 , 127 – 150 .
   Web of Science ®Google Scholar
• Ghosh , S. ; Guha , A. ; Krishna , K.M. ; Mukhopadhyay , A.K. ; Maiti , H.S. Tape cast multilayer composite of nano zirconia with high toughness . Materials and Manufacturing Processes 2006 , 21 ( 7 ), 662 – 668 .
   Web of Science ®Google Scholar
• Wanga , Y. ; Kang , S.B. ; Chob , J. Microstructure and mechanical properties of Mg–Al–Mn–Ca alloy sheet produced by twin roll casting and sequential warm rolling . Journal of Alloys and Compounds 2011 , 509 , 704 – 711 .
   Web of Science ®Google Scholar
• Yun , M. ; Lokyer , S. ; Hunt , J.D. Twin roll casting of aluminium alloys . Materials Science and Engineering A 2000 , 280 , 116 – 123 .
   Web of Science ®Google Scholar
• Ha , M. ; Choi , J. ; Jeong , S. ; Moon , H. ; Lee , S. ; Kang , T. Analysis and prevention of microcracking phenomenon occurring during strip casting of an AISI 304 stainless steel . Metallurgical and Materials Transactions A 2002 , 33A , 1487 – 1497 .
   Web of Science ®Google Scholar
• Gras , C. ; Meredith , M. ; Hunt , J.D. Microdefects formation during the twin-roll casting of Al–Mg–Mn aluminium alloys . Journal of Materials Processing Technology 2005 , 167 , 62 – 72 .
   Web of Science ®Google Scholar
• Wang , B. ; Zhang , J.-Y. ; Fan , J.-F. ; Zhao , S.-L. ; Ren , S.-B. ; Chou , K.-C. Modelling of melt flow and solidification in the twin-roll strip casting process . Steel Research International 2009 , 80 ( 3 ), 218 – 222 .
   Web of Science ®Google Scholar
• Zeng , J. ; Koitzsch , R. ; Pfeifer , H. ; Friedrich , B. Numerical simulation of the twin-roll casting process of magnesium alloy strip . Journal of Materials Processing Technology 2009 , 209 , 2321 – 2328 .
   Web of Science ®Google Scholar
• Zhao , H.-Y. ; Ju , D.-Y. ; Asakami , T. ; Hu , L. An Experimental study of the strip casting process of aluminum alloy by the twin roll method . Materials and Manufacturing Processes 2001 , 16 ( 5 ), 643 – 654 .
   Web of Science ®Google Scholar
• Guang-shan , W. ; Hong-shuang , D. ; Feng , H. Preparation of AZ31 magnesium alloy strips using vertical twin-roll caster . Transactions of Non Ferrous Metals Society of China 2010 , 20 , 973 – 979 .
   Web of Science ®Google Scholar
• Das , S. ; Lim , N.S. ; Seol , J.B. ; Kim , H.W. ; Park , C.G. Effect of the rolling speed on microstructural and mechanical properties of aluminum–magnesium alloys prepared by twin roll casting . Materials and Design 2010 , 31 , 1633 – 1638 .
   Web of Science ®Google Scholar
• Das , S. ; Lim , N.S. ; Kim , H.W. ; Park , C.G. Effect of rolling speed on microstructure and age-hardening behaviour of Al–Mg–Si alloy produced by twin roll casting process . Materials and Design 2011 , 32 , 4603 – 4607 .
   Web of Science ®Google Scholar
• Komeda , K. ; Haga , T. ; Kumai , S. High speed twin-roll casting of Al-Mg alloys . Advanced Materials Research 2011 , 154–155 , 1544 – 1548 .
   Google Scholar
• Mizoguchi , T. ; Miyazawa , K. Formation of solidification structure in Twin roll casting process of 18Cr- 8Ni stainless steel . ISIJ International 1995 , 35 , 771 – 777 .
   Web of Science ®Google Scholar
• Haga , T. ; Takahashi , K. ; Ikawa , M. ; Watari , H. A vertical-type twin roll caster for aluminum alloy strips . Materials Processing Technology 2003 , 140 , 610 – 615 .
   Web of Science ®Google Scholar
• Sahoo , S. ; Kumar , A. ; Dhindaw , B.K. ; Ghosh , S. Modeling and experimental validation of rapid cooling and solidification during high speed twin roll strip casting of Al-33 wt.% Cu . Metallurgical and Materials Transaction B 2012 , 43 , 915 – 924 .
   Web of Science ®Google Scholar
• Jones , H. Rapid Solidification of Metals and Alloys ; Institute of Metallurgist : London , 1982 .
   Google Scholar
• Neumann , W. ; Leonhardt , M. ; Loser , W. ; Sellger , R. ; Jurisch , M. Effect of ribbon-wheel contact on the microstructure of melt-spun Al-Cu eutectic alloy ribbons . Journal of Materials Science 1985 , 20 , 3141 – 3149 .
   Web of Science ®Google Scholar
• Kaya , H. ; Gunduz , M. ; Cadirli , E. ; Uzun , O. Effect of growth rate and lamellar spacing on microhardness in the directionally solidified Pb-Cd, Sn-Zn and Bi-Cd eutectic alloys . Journal of Materials Science 2004 , 39 , 6571 – 6576 .
   Web of Science ®Google Scholar
• Cadiril , E. ; Kaya , H. ; Marash , N. The dependance of lamellar spacing and microhardness on growth rate in the directioannly solidified Bi-43 wt.% Sn at a constant temperature gradient . Metals and Materials International 2009 , 15 ( 5 ), 741 – 751 .
   Web of Science ®Google Scholar
• Boukhris , N. ; Lallouche , S. ; Debili , M.Y. ; Draissia , M. Microhardness variation and related microstructure in Al–Cu alloys prepared by HF induction melting and RF sputtering . European Physical Journal Applied Physics 2009 , 45 , 30501 .
   Google Scholar