Programming of CNC Milling Machines Using Particle Swarm Optimization

REFERENCES

• Kishalay , M. ; Sushanta , M. ; Venkataramana , R. Multiobjective Pareto optimization of an industrial straight grate iron ore induration process using an evolutionary algorithm . Materials and Manufacturing Processes 2009 , 24 , 331 – 342 .
   Web of Science ®Google Scholar
• Kovacic , M. ; Sarler , B. Application of the genetic programming for increasing the soft annealing productivity in steel industry. Materials and Manufacturing Processes 2009, 24, 369–374.
   Web of Science ®Google Scholar
• Ciurana , J. ; Arias , G. ; Ozel , T. Neural network modeling and Particle Swarm Optimization (PSO) of process parameters in pulsed laser micromachining of hardened AISI H13 steel . Materials and Manufacturing Processes 2011 , 24 , 358 – 368 .
   Web of Science ®Google Scholar
• Ficko , M. ; Brezovnik , S. ; Klancnik , S. ; Balic , J. ; Brezocnik , M. ; Pahole , I. Intelligent design of an unconstrained layout for flexible manufacturing system . Neurocomputing 2010 , 73 , 639 – 647 .
   Web of Science ®Google Scholar
• Dimitriu , R.C. ; Bhadeshia , H.K.D.H. ; Fillon , C. ; Poloni , C. Strength of ferritic steels: Neural networks and genetic programming . Materials and Manufacturing Processes 2011 , 24 , 10 – 15 .
   Web of Science ®Google Scholar
• Hachicha , W. A simulation metamodelling based neural networks for lot-sizing problem in MTO sector . International Journal of Simulation Modelling 2011 , 10 , 191 – 203 .
   Web of Science ®Google Scholar
• Engelbrecht , A. Fundamentals of Computational Swarm Intelligence ; Wiley & Sons : Chichester , UK , 2005 .
   Google Scholar
• Ding , X.M. ; Lu , Y.Q. ; Liu , P.L. Optimal cutter selection for complex mould machining . SIM Tech Technical Reports 2005 , 6 , 84 – 88 .
   Google Scholar
• Kyoung , Y.M. ; Cho , K.K. ; Jun , C.S. Optimal tool selection for pocket machining in process planning . Computers in Industry Engineering 1997 , 33 , 505 – 508 .
   Web of Science ®Google Scholar
• Rama Kotaiah , K. ; Srinivas , J. ; Babu , K.J. Prediction of optimal stability states in inward-turning operation using genetic algorithms . Materials and Manufacturing Processes 2010 , 25 , 193 – 207 .
   Web of Science ®Google Scholar
• Balic , J. ; Cus , F. ; Vaupotic , B. Intelligent automatic cutting-tool selections for turning operations. International Conference on Artificial Intelligence and Machine Learning, Dubai, United Arab Emirates, AIML-11, 2011; 7.
   Google Scholar
• Lartigue , C. ; Thiebaut , F. ; Maekawa , T. CNC tool path in terms of B-spline curves . Computer-Aided Design 2001 , 3 , 307 – 319 .
   Web of Science ®Google Scholar
• Park Sang , C. ; Chang , M. Tool path generation for a surface model with defects . Computers in Industry 2010 , 61 , 75 – 82 .
   Web of Science ®Google Scholar
• Brezocnik , M. ; Kovacic , M. ; Ficko , M. ; Balic , J. Programming CNC lathes by genetic algorithms . International Conference on Flexible Automation and Intelligent Manufacturing , Bilbao , 2005 ; pp. 163 – 170 .
   Google Scholar
• Klancnik , S. ; Balic , J. ; Cus , F. Intelligent prediction of milling strategy using neural networks . Control Cybern. 2010 , 39 , 9 – 22 .
   Web of Science ®Google Scholar
• Ramli , R. ; Yamamoto , H. ; Qudeiri , J.A. Tool path of lathe machine in flexible transfer lines by using genetic algorithms . International Journal of Production Economics 2009 , 121 , 72 – 80 .
   Web of Science ®Google Scholar
• Antic , A. ; Zeljkovic , M. ; Petrovic , P. Development of the tool wear condition classification system model in turning . Machine Design 2010 , 3 , 207 – 212 .
   Google Scholar
• Curkovic , P. ; Jerbic , B. Honey-bees optimization algorithm applied to path planning problem . International Journal of Simulation Modelling 2007 , 6 , 154 – 164 .
   Google Scholar
• Hassan , R. ; Cohanim , B.O. ; Weck , A. Comparison of particle swarm optimization and the genetic algorithm . Structural Dynamics and Materials Conference, 46th AIAA/ASME/ASCE/AHS/ASC Structures , Austin , TX , April 18–21 , 2005 ; 18 – 21 .
   Google Scholar
• Chaari , R. ; Abdennadher , M. ; Louati , J. ; Haddar , M. Modelling of the 3D machining geometric defects accounting for workpiece vibratory behaviour . International Journal of Simulation Modelling 2011 , 10 , 66 – 77 .
   Web of Science ®Google Scholar