Rapid Consolidation of Gamma Titanium Aluminide Powders Attrition Milled to Submicron Scale

REFERENCES

• Sauthoff , G. Intermetallics ; Weinheim : New York , 1995 .
   Google Scholar
• Kothari , K. ; Radhakrishnan , R. ; Wereley , N.M. Advances in gamma titanium aluminides and their manufacturing techniques . Progress in Aerospace Sciences 2012 , 55 , 1 – 16 .
   Web of Science ®Google Scholar
• Marketz , W.T. ; Fischer , F.D. ; Clemens , H. Deformation mechanisms in TiAl intermetallics–experiments and modeling . International Journal of Plasticity 2003 , 19 , 281 – 321 .
   Web of Science ®Google Scholar
• Kim , Y.-W. Intermetallic alloys based on gamma titanium aluminides. Journal of Metals 1989 , 41 , 24 – 30 .
   Google Scholar
• Kim , Y.-W. Microstructural evolution and mechanical properties of a forged gamma titanium alloy . Acta Metallurgica et Materiala 1992 , 40 , 1121 – 1133 .
   Web of Science ®Google Scholar
• Marketz , W.T. ; Fischer , F.D. ; Kauffmann , F. ; Dehm , G. ; Bidlingmaier , T. ; Wanner , A. ; Clemens , H. On the role of twinning during room temperature deformation of gamma-TiAl based alloys . Materials Science and Engineering A 2002 , 329 , 177 – 183 .
   Web of Science ®Google Scholar
• Froes , F.H. ; Suryanarayana , C. Physical Metallurgy of and Processing of Intermetallics Compounds ; Chapman and Hall : New York , 1995 .
   Google Scholar
• Chen , Y.Y. ; Yu , H.B. ; Zhang , D.L. ; Chai , L.H. Effect of spark plasma sintering temperature on microstructure and mechanical properties of an ultrafine grained TiAl intermetallic alloy . Materials Science and Engineering A 2009 , 525 , 166 – 173 .
   Web of Science ®Google Scholar
• Oehring , M. ; Klassen , T. ; Borman , R. The formation of metastable Ti-Al solid solutions by mechanical alloying and ball milling . Journal of Material Research 1993 , 8 , 2819 – 2829 .
   Web of Science ®Google Scholar
• Fadeeva , V.I. ; Leonov , A.V. ; Szewczak , E. ; Matyja , H. Structural defects and thermal stability of Ti(Al) solid solution obtained by mechanical alloying . Materials Science and Engineering A 1998 , 242 , 230 – 234 .
   Web of Science ®Google Scholar
• Kumaran , S. ; Srinivasa Rao , T. ; Subramanian , R. ; Angelo , P. Nanocrystalline and amorphous structure formation in Ti-Al system during high energy ball milling . Powder Metallurgy 2005 , 48 , 354 – 357 .
   Web of Science ®Google Scholar
• Bhattacharya , P. ; Bellon , P. ; Averback , R.S. ; Hales , S.J. Nanocrystalline TiAl powders synthesized by high-energy ball milling: Effects of milling parameters on yield and contamination . Journal of Alloys and Compounds 2004 , 368 , 187 – 196 .
   Web of Science ®Google Scholar
• Forouzanmehr , N. ; Karimzadeh , F. ; Enayati , M.H. Study on solid-state reactions of nanocrystalline TiAl synthesized by mechanical alloying . Journal of Alloys and Compounds 2009 , 471 , 93 – 97 .
   Web of Science ®Google Scholar
• Gonzalez , G. ; Sagarzazu , A. ; Bonyuet , D. ; D'Angelo , L. ; Villalba , R. Solid state amorphisation in binary systems prepared by mechanical alloying . Journal of Alloys and Compounds 2009 , 483 , 289 – 297 .
   Web of Science ®Google Scholar
• Al-Aqeeli , N. ; Abdullahi , K. ; Suryanarayana , C. ; Laoui , T. ; Nouari , S. Materials and Manufacturing Processes 2013 , 28 , 984 – 990 .
   Web of Science ®Google Scholar
• Raygan , S. ; Pourabdoli , M. ; Abdizadeh , H. ; Medraj , M. Synthesizing nanostructured Ni75Mg16.66Y8.34 (at%) powder by solid state reaction and mechanical milling . Materials and Manufacturing Processes 2012 , 27 , 1300 – 1305 .
   Web of Science ®Google Scholar
• Lara-Guevara , A. ; Rojas-Rodriguez , I. ; Velazquez-Hernandez , R. ; Bernal-Correa , R.A. ; Sierra-Gutierrez , A. ; Herrera-Ramos , A. ; Rodriguez-Garcia , M.E. Synthesis of copper-alumina composites by mechanical milling: An analysis . Materials and Manufacturing Processes 2013 , 28 , 157 – 162 .
   Web of Science ®Google Scholar
• Wereley , N.M. ; Zahrah , T.F. ; Charron , F.H. Intelligent control of consolidation and solidification processes . J. Materials Engineering and Performance 1993 , 2 , 671 – 682 .
   Web of Science ®Google Scholar
• Zhang , W. ; Liu , Y. ; Liu , B. ; Huang , B.Y. Comparative assessment of microstructure and compressive behaviours of PM TiAl alloy prepared by HIP and pseudo-HIP technology . Powder Metallurgy 2011 , 54 , 133 – 141 .
   Web of Science ®Google Scholar
• Robertson , I.M. ; Schaffer , G.B. Review of densification of titanium based powder systems in press and sinter processing . Powder Metallurgy 2011 , 43 , 146 – 162 .
   Google Scholar
• Suryanarayana , C. Mechanical alloying and milling. In: Ashby, M.; Cantor, B.; Christian, J.W.; Massalski, T.B. Eds., Progress in Material Science 2001, 46, 1–184.
   Google Scholar
• Qu , S. ; Li , X. ; Li , Y. ; Hu , L. ; Wang , E. Manufacturing a TiAl alloy by high-energy ball milling and subsequent reactive sintering . Rare Metals 2006 , 25 , 21 – 26 .
   Web of Science ®Google Scholar
• Kothari , K. ; Radhakrishnan , R. ; Wereley , N.M. ; Sudarshan , T.S. Microstructure and mechanical properties of consolidated gamma titanium aluminides . Powder Metallurgy 2007 , 50 , 21 – 27 .
   Web of Science ®Google Scholar
• Kothari , K. ; Radhakrishnan , R. ; Wereley , N.M. Characterization of rapidly consolidated titanium diboride . ASME Journal of Engineering Materials and Technology 2011 , 133 , 024501 – 024504 .
   Web of Science ®Google Scholar
• Srivatsan , T.S. ; Givens , S. ; Al-Hajri , M. ; Petraroli , M. ; Radhakrishnan , R. ; Sudarshan , T.S. The quasi static fracture behavior of a bulk Al-Cr-Fe alloy made by consolidating micron- and nano-sized powders . Journal of Metastable and Nanocrystalline Materials 2005 , 23 , 255 – 258 .
   Google Scholar
• Srivatsan , T.S. ; Ravi , B.G. ; Petraroli , M. ; Sudarshan , T.S. The microhardness and microstructural characterization of bulk molybdenum samples obtained by consolidating nanopowders by plasma pressure compaction . International Journal of Refractory Metals and Hard Materials 2002 , 20 , 181 – 186 .
   Web of Science ®Google Scholar
• Srivatsan , T.S. ; Woods , R. ; Petraroli , M. ; Sudarshan , T.S. An investigation of the influence of powder particle size on microstructure and hardness of bulk samples of tungsten carbide . Powder Technology 2002 , 122 , 54 – 60 .
   Web of Science ®Google Scholar
• Srivatsan , T.S. ; Ravi , B.G. ; Naruka , A.S. ; Riester , L. ; Petraroli , M. ; Sudarshan , T.S. The microstructure and hardness of molybdenum powders consolidated by plasma pressure compaction . Powder Technology 2001 , 114 , 136 – 144 .
   Web of Science ®Google Scholar
• Srivatsan , T.S. ; Ravi , B.G. ; Naruka , A.S. ; Riester , L. ; Yoo , S. ; Sudarshan , T.S. A study of microstructure and hardness of bulk copper sample obtained by consolidating nanocrystalline powders using plasma pressure compaction . Materials Science and Engineering A 2001 , 311 , 22 – 27 .
   Web of Science ®Google Scholar
• Yoo , S.H. ; Sudarshan , T.S. ; Sethuram , K. ; Subhash , G. ; Dowding , R.J. Consolidation and high strain rate mechanical behavior of nanocrystalline tantalum powder. Nanostructured Materials 1999, 12, 23–28.
   Web of Science ®Google Scholar
• Rivard , J. Development of a finite volume model for the high-density infrared processing of γ-TiAl thin-gage sheet. Ph.D. Dissertation, University of Cincinnati, Cincinnati, OH, 2005.
   Google Scholar
• Appel , F. ; Oehring , M. ; Paul , J.D.H. ; Kinkenberg , Ch. ; Carneiro , T. Physical aspects of hot-working gamma-based titanium aluminides . Intermetallics 2004 , 12 , 791 – 802 .
   Web of Science ®Google Scholar
• Appel , F. ; Oehring , M. ; Wagner , R. Novel design concepts for gamma-based titanium aluminide alloys . Intermetallics 2000 , 8 , 1283 – 1312 .
   Web of Science ®Google Scholar
• Kim , Y.-W. ; Rosenberger , A. ; Dimiduk , D.M. Microstructural changes and estimated strengthening contributions in a gamma alloy Ti-45Al-5Nb pack-rolled sheet . Intermetallics 2009 , 17 , 1017 – 1027 .
   Web of Science ®Google Scholar
• ASTM, Annual Book of ASTM Standards, American Society for Testing and Materials; ASTM: West Conshohocken, PA, 1997 .
   Google Scholar
• Kim , Y.-W. Strength and ductility in TiAl alloys . Intermetallics 1998 , 6 , 623 – 628 .
   Web of Science ®Google Scholar
• Yamaguchi , M. ; Inui , H. ; Ito , K. High-temperature structural intermetallics . Acta Mater. 2000 , 48 , 307 – 322 .
   Web of Science ®Google Scholar
• Mercer , C. ; Soboyejo , W.O. Hall-Petch relationships in gamma titanium aluminides . Scripta Materialia 1996 , 35 , 17 – 22 .
   Web of Science ®Google Scholar
• Yu , H.B. ; Zhang , D.L. ; Chen , Y.Y. ; Cao , P. ; Gabbitas , B. Synthesis of an ultrafine grained TiAl based alloy by subzero temperature milling and HIP, its microstructure and mechanical properties . Journal of Alloys and Compounds 2009 , 474 , 105 – 112 .
   Web of Science ®Google Scholar
• Zhang , C. ; Zhang , K. ; Wang , G. Dependence of heating rate in PCAS on microstructures and high temperature deformation properties of γ-TiAl intermetallic alloys . Intermetallics 2010 , 18 , 834 – 840 .
   Web of Science ®Google Scholar
• Couret , A. ; Molénat , G. ; Galy , J. ; Thomas , M. Microstructures and mechanical properties of TiAl alloys consolidated by spark plasma sintering . Intermetallics 2008 , 16 , 1134 – 1141 .
   Web of Science ®Google Scholar