Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 30, 2015 - Issue 10
Submit an article Journal homepage
151
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Optimization of Deformation and Densification Properties of the Sintered Plain Carbon Steel

T. K. KandavelSchool of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy, Sastra University, Thanjavur, Tamil Nadu, IndiaCorrespondence[email protected]
,
T. PanneerselvamSchool of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy, Sastra University, Thanjavur, Tamil Nadu, India
&
P. KarthikeyanSchool of Mechanical Engineering, Shanmugha Arts, Science, Technology and Research Academy, Sastra University, Thanjavur, Tamil Nadu, India
Pages 1240-1245 | Received 16 Apr 2013, Accepted 01 Sep 2013, Published online: 11 Feb 2015

REFERENCES

  • Kandavel, T.K.; Chandramouli, R.; Shanmugasundaram, D. Experimental study of the plastic deformation and densification behaviour of some sintered low alloy P/M steels. Materials and Design 2009, 30, 768–1776.
  • Kandavel, T.K.; Chandramouli, R.; Ravichandran, M. Experimental study on the plastic deformation and densification characteristics of some sintered and heat treated low alloy P/M steels. Materials and Design 2010, 31, 485–492.
  • Kandavel, T.K.; Chandramouli, R. Experimental investigations on the microstructure and mechanical properties of sinter-forged Cu and Mo-alloyed low alloy steel. International Journal of Advanced Manufacturing Technology 2010, 50, 53–59.
  • Mohanraj, A.P.; Selvakumar, N. Deformation behavior of sintered Fe-C-Mn composite during cold upset forming. Materials and Manufacturing Processes 2011, 26 (11), 1388–1392.
  • Duggan, B.J.D.; Tse, Y.Y.; Lam, G.; Quadir, M.Z. Deformation and recrystallisation of interstitial free (IF) steel. Materials and Manufacturing Processes 2011, 26 (1), 51–57.
  • Ahmad, S.; Muhamad, N.; Muchtar, A.; Sahari, J.; Jamaludin, K.R.; Ibrahim, M.H.I. Mohamad Nor N.H. Taguchi method for the determination of optimised sintering parameters of titanium alloy foams. In The International Conference on Advances in Materials and Processing Technologies, Kuala Lumpur, Malaysia, October 26–28, 2009.
  • Siddhi Jailani, H.; Rajadurai, A.; Mohan, B.; Senthil Kumar, A.; Sornakumar, T. Multi-response optimisation of sintering parameters of Al–Si alloy/fly ash composite using Taguchi method and grey relational analysis. International Journal of Advanced Manufacturing Technology 2009, 45, 362–369.
  • Beri, N.; Maheshwari, S.; Sharma, C.; Kumar, A. Performance evaluation of powder metallurgy electrode in electrical discharge machining of AISI D2 steel using Taguchi method. International Journal of Aerospace and Mechanical Engineering 2008, 2 (3), 167–171.
  • Neves, F.; Braz Fernandes, F.M.; Martins, I.; Correia, J.B. Parametric optimization of Ti-Ni powder mixtures produced by mechanical alloying. Journal of Alloys and Compounds 2011, 509, 5271–5274.
  • Tsao, C.C. Grey Taguchi method to optimize the milling parameters of aluminum. International Journal of Advanced Manufacturing Technology 2009, 40, 41–48.
  • Tosun, N.; Pihtili, H. Gray relational analysis of performance characteristics in MQL milling of 7075 Al alloy. International Journal of Advanced Manufacturing Technology 2010, 46, 509–515.
  • Soon Hong, H.; Kyung Chung, H. The effects of processing parameters on mechanical properties of SiCw/2124Al composites. Journal of Materials Processing Technology 1995, 48, 349–355.
  • Ilo, S.; Just, Ch.; Xhiku, F. Optimisation of multiple quality characteristics of hard facing using grey-based Taguchi method. Materials and Design 2012, 33, 459–468.
  • Sridhar, R.; Narasimha Murthy, H.N.; Niranjan Pattar, K.R.; Vishnu Mahesh; Krishna, M. Parametric study of twin screw extrusion for dispersing MMT in vinyl ester using orthogonal array technique and grey relational analysis. Composites: Part B 2012, 43, 599–608.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.